Skip to contentSkip to conversation

Implement prctl(PR_GET_ENDIAN) for all architectures

PATCH In review Helge Deller 3 participants 5 messages Oct 22, 2009 – Nov 10, 2009

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 Implement prctl(PR_GET_ENDIAN) for all architectures

The PR_GET_ENDIAN and PR_SET_ENDIAN prctl() calls have been implemented to allow to switch processes at runtime from big-endian to little-endian mode (and vice versa) on PowerPC processors. Since the other architectures don't support this feature, they currently will just fail and return -EINVAL.

This patch adds just minimal overhead and implements the PR_GET_ENDIAN call for all other architectures by returning the native endianess of the architecture. Furthermore, calling prctl(PR_SET_ENDIAN) with the native endianess of the architecture will succeed, while trying to set another (not-supported) endianess, will fail.

The patch can be tested with the following program:

#include <stdio.h>
#include <linux/prctl.h>

int main(int argc, char **argv)

{
	int endian, ret;

	ret = prctl(PR_GET_ENDIAN, &endian);
	if (ret)
		perror("prctl(PR_GET_ENDIAN) not implemented");
	printf("current process/machine is running in %s endian mode (%d)\n",
		endian == PR_ENDIAN_LITTLE ? "little":"big", endian);

	/* setting native endianess should succeed */
	ret = prctl(PR_SET_ENDIAN, endian);
	printf("prctl(PR_SET_ENDIAN,%d) should succeed: %s\n",
		endian, ret == 0 ? "OK":"FAIL");

	/* setting foreign endianess should fail */
	endian = (endian == PR_ENDIAN_LITTLE) ?
		PR_ENDIAN_BIG : PR_ENDIAN_LITTLE;
	ret = prctl(PR_SET_ENDIAN, endian);
	printf("prctl(PR_SET_ENDIAN,%d) should fail: %s\n",
		endian, ret == 0 ? "OK":"FAIL");
}
kernel/sys.c +13 -2
index 255475d..bd71dcb 100644
@@ -46,6 +46,15 @@
 #include <asm/io.h>
 #include <asm/unistd.h>
 
+#if defined(__BIG_ENDIAN)
+# define PRCTL_ENDIAN_DEFAULT	(PR_ENDIAN_BIG)
+#elif defined(__LITTLE_ENDIAN)
+# define PRCTL_ENDIAN_DEFAULT	(PR_ENDIAN_LITTLE)
+#else
+# error "No endianess?"
+#endif
+
+
 #ifndef SET_UNALIGN_CTL
 # define SET_UNALIGN_CTL(a,b)	(-EINVAL)
 #endif
@@ -65,10 +74,12 @@
 # define GET_FPEXC_CTL(a,b)	(-EINVAL)
 #endif
 #ifndef GET_ENDIAN
-# define GET_ENDIAN(a,b)	(-EINVAL)
+# define GET_ENDIAN(task,addr)	\
+	put_user(PRCTL_ENDIAN_DEFAULT, (int __user *) (addr))
 #endif
 #ifndef SET_ENDIAN
-# define SET_ENDIAN(a,b)	(-EINVAL)
+# define SET_ENDIAN(task,value)	\
+	( (value) == PRCTL_ENDIAN_DEFAULT ? 0 : -EINVAL )
 #endif
 #ifndef GET_TSC_CTL
 # define GET_TSC_CTL(a)		(-EINVAL)
#1 lore raw
Quoted 31 lines · On Thu, 22 Oct 2009 21:35:33 +0200 Helge Deller <[email protected]> wrote:

The PR_GET_ENDIAN and PR_SET_ENDIAN prctl() calls have been implemented to allow to switch processes at runtime from big-endian to little-endian mode (and vice versa) on PowerPC processors. Since the other architectures don't support this feature, they currently will just fail and return -EINVAL.

This patch adds just minimal overhead and implements the PR_GET_ENDIAN call for all other architectures by returning the native endianess of the architecture. Furthermore, calling prctl(PR_SET_ENDIAN) with the native endianess of the architecture will succeed, while trying to set another (not-supported) endianess, will fail.

The patch can be tested with the following program:

#include <stdio.h>
#include <linux/prctl.h>

int main(int argc, char **argv)

{
	int endian, ret;

	ret = prctl(PR_GET_ENDIAN, &endian);
	if (ret)
		perror("prctl(PR_GET_ENDIAN) not implemented");
	printf("current process/machine is running in %s endian mode (%d)\n",
		endian == PR_ENDIAN_LITTLE ? "little":"big", endian);

	/* setting native endianess should succeed */
	ret = prctl(PR_SET_ENDIAN, endian);
	printf("prctl(PR_SET_ENDIAN,%d) should succeed: %s\n",
		endian, ret == 0 ? "OK":"FAIL");
Quoted 8 lines
	/* setting foreign endianess should fail */
	endian = (endian == PR_ENDIAN_LITTLE) ?
		PR_ENDIAN_BIG : PR_ENDIAN_LITTLE;
	ret = prctl(PR_SET_ENDIAN, endian);
	printf("prctl(PR_SET_ENDIAN,%d) should fail: %s\n",
		endian, ret == 0 ? "OK":"FAIL");
}

The changelog forgot to provide any reason for making this change to the kernel.

#2 lore raw
Quoted 43 lines · Andrew Morton
Quoted 31 lines · On Thu, 22 Oct 2009 21:35:33 +0200 Helge Deller <[email protected]> wrote:

The PR_GET_ENDIAN and PR_SET_ENDIAN prctl() calls have been implemented to allow to switch processes at runtime from big-endian to little-endian mode (and vice versa) on PowerPC processors. Since the other architectures don't support this feature, they currently will just fail and return -EINVAL.

This patch adds just minimal overhead and implements the PR_GET_ENDIAN call for all other architectures by returning the native endianess of the architecture. Furthermore, calling prctl(PR_SET_ENDIAN) with the native endianess of the architecture will succeed, while trying to set another (not-supported) endianess, will fail.

The patch can be tested with the following program:

#include <stdio.h>
#include <linux/prctl.h>

int main(int argc, char **argv)

{
	int endian, ret;

	ret = prctl(PR_GET_ENDIAN, &endian);
	if (ret)
		perror("prctl(PR_GET_ENDIAN) not implemented");
	printf("current process/machine is running in %s endian mode (%d)\n",
		endian == PR_ENDIAN_LITTLE ? "little":"big", endian);

	/* setting native endianess should succeed */
	ret = prctl(PR_SET_ENDIAN, endian);
	printf("prctl(PR_SET_ENDIAN,%d) should succeed: %s\n",
		endian, ret == 0 ? "OK":"FAIL");
Quoted 8 lines
	/* setting foreign endianess should fail */
	endian = (endian == PR_ENDIAN_LITTLE) ?
		PR_ENDIAN_BIG : PR_ENDIAN_LITTLE;
	ret = prctl(PR_SET_ENDIAN, endian);
	printf("prctl(PR_SET_ENDIAN,%d) should fail: %s\n",
		endian, ret == 0 ? "OK":"FAIL");
}
Quoted 2 lines

The changelog forgot to provide any reason for making this change to the kernel.

Why is PR_GET_ENDIAN needed? Surely user-space can detect the current endianess for itself?

Also, which endianess does this refer to? ARM has had and continues to invent bizarre endianess rules, where the endianess of some datum depends not only on the endianess flag in a core control register but also the functional unit operating on the data and the ARM ISA version. Some of these endianess properties are unchangeable, some may be changeable in specific implementations.

What about archs that always run in one endianess but support other-endian data accesses via special instruction operands? (I believe SPARC falls into this category.) PR_SET_ENDIAN on the other-endian value must fail, but what does that mean to the program? That it can't do other-endian accesses? No.

I think the very concept of flipping a thread-global endianess mode flag is too architecture specific to be treated as a generic thing.

#4 lore raw
In reply to Andrew Morton
Quoted 43 lines · Andrew Morton
Quoted 31 lines · On Thu, 22 Oct 2009 21:35:33 +0200 Helge Deller<[email protected]> wrote:

The PR_GET_ENDIAN and PR_SET_ENDIAN prctl() calls have been implemented to allow to switch processes at runtime from big-endian to little-endian mode (and vice versa) on PowerPC processors. Since the other architectures don't support this feature, they currently will just fail and return -EINVAL.

This patch adds just minimal overhead and implements the PR_GET_ENDIAN call for all other architectures by returning the native endianess of the architecture. Furthermore, calling prctl(PR_SET_ENDIAN) with the native endianess of the architecture will succeed, while trying to set another (not-supported) endianess, will fail.

The patch can be tested with the following program:

#include<stdio.h>
#include<linux/prctl.h>

int main(int argc, char **argv)

{
	int endian, ret;

	ret = prctl(PR_GET_ENDIAN,&endian);
	if (ret)
		perror("prctl(PR_GET_ENDIAN) not implemented");
	printf("current process/machine is running in %s endian mode (%d)\n",
		endian == PR_ENDIAN_LITTLE ? "little":"big", endian);

	/* setting native endianess should succeed */
	ret = prctl(PR_SET_ENDIAN, endian);
	printf("prctl(PR_SET_ENDIAN,%d) should succeed: %s\n",
		endian, ret == 0 ? "OK":"FAIL");
Quoted 8 lines
	/* setting foreign endianess should fail */
	endian = (endian == PR_ENDIAN_LITTLE) ?
		PR_ENDIAN_BIG : PR_ENDIAN_LITTLE;
	ret = prctl(PR_SET_ENDIAN, endian);
	printf("prctl(PR_SET_ENDIAN,%d) should fail: %s\n",
		endian, ret == 0 ? "OK":"FAIL");
}
Quoted 2 lines

The changelog forgot to provide any reason for making this change to the kernel.

The reason - and the patch - is pretty trivial.
The kernel provides an interface (for all architectures) which is currently only useable on one single architecture (ppc).
So, either we could just remove the interface alltogether for all architectures beside ppc, or implement the functionality for all architectures so that they return at least some kind of useful values back to userspace.
I hope this qualifies for kernel inclusion?

Helge

#3 lore raw
In reply to Mikael Pettersson
Quoted 44 lines · Mikael Pettersson
Quoted 43 lines · Andrew Morton
Quoted 39 lines · On Thu, 22 Oct 2009 21:35:33 +0200 Helge Deller<[email protected]> wrote:

The PR_GET_ENDIAN and PR_SET_ENDIAN prctl() calls have been implemented to allow to switch processes at runtime from big-endian to little-endian mode (and vice versa) on PowerPC processors. Since the other architectures don't support this feature, they currently will just fail and return -EINVAL.

This patch adds just minimal overhead and implements the PR_GET_ENDIAN call for all other architectures by returning the native endianess of the architecture. Furthermore, calling prctl(PR_SET_ENDIAN) with the native endianess of the architecture will succeed, while trying to set another (not-supported) endianess, will fail.

The patch can be tested with the following program:

#include<stdio.h>
#include<linux/prctl.h>

int main(int argc, char **argv)
{

(quoted diff) +0 -0
 	int endian, ret;
 
 	ret = prctl(PR_GET_ENDIAN,&endian);
 	if (ret)
 		perror("prctl(PR_GET_ENDIAN) not implemented");
 	printf("current process/machine is running in %s endian mode (%d)\n",
 		endian == PR_ENDIAN_LITTLE ? "little":"big", endian);
 
 	/* setting native endianess should succeed */
 	ret = prctl(PR_SET_ENDIAN, endian);
 	printf("prctl(PR_SET_ENDIAN,%d) should succeed: %s\n",
 		endian, ret == 0 ? "OK":"FAIL");
 
 	/* setting foreign endianess should fail */
 	endian = (endian == PR_ENDIAN_LITTLE) ?
 		PR_ENDIAN_BIG : PR_ENDIAN_LITTLE;
 	ret = prctl(PR_SET_ENDIAN, endian);
 	printf("prctl(PR_SET_ENDIAN,%d) should fail: %s\n",
 		endian, ret == 0 ? "OK":"FAIL");
 }
Quoted 5 lines
Quoted 2 lines

The changelog forgot to provide any reason for making this change to the kernel.

Why is PR_GET_ENDIAN needed? Surely user-space can detect the current endianess for itself?

PR_GET_ENDIAN/PR_SET_ENDIAN was introduced with:
commit 651d765d0b2c72d33430487c8b6ef64c60cd2134

Author: Anton Blanchard <[email protected]>
Date:   Wed Jun 7 16:10:19 2006 +1000

[PATCH] Add a prctl to change the endianness of a process.

This new prctl is intended for changing the execution mode of the processor, on processors that support both a little-endian mode and a big-endian mode. It is intended for use by programs such as instruction set emulators (for example an x86 emulator on PowerPC), which may find it convenient to use the processor in an alternate endianness mode when executing translated instructions.

Note that this does not imply the existence of a fully-fledged ABI for both endiannesses, or of compatibility code for converting system calls done in the non-native endianness mode. The program is expected to arrange for all of its system call arguments to be presented in the native endianness.

Switching between big and little-endian mode will require some care in constructing the instruction sequence for the switch. Generally the instructions up to the instruction that invokes the prctl system call will have to be in the old endianness, and subsequent instructions will have to be in the new endianness.

Quoted 11 lines

Also, which endianess does this refer to? ARM has had and continues to invent bizarre endianess rules, where the endianess of some datum depends not only on the endianess flag in a core control register but also the functional unit operating on the data and the ARM ISA version. Some of these endianess properties are unchangeable, some may be changeable in specific implementations.

What about archs that always run in one endianess but support other-endian data accesses via special instruction operands? (I believe SPARC falls into this category.) PR_SET_ENDIAN on the other-endian value must fail, but what does that mean to the program? That it can't do other-endian accesses? No.

Right. I think no one objects on what you are writing here.

Quoted 2 lines

I think the very concept of flipping a thread-global endianess mode flag is too architecture specific to be treated as a generic thing.

Please read my patch again.
It's not trying to flip any endianess settings in any generic way at all. For PR_GET_ENDIAN it just returns the real kernels endianess instead of -EINVAL, and it does not allow you to change the endianess with PR_SET_ENDIAN.

Helge