File name substitution in linker scripts
I'm wondering if and how it's possible to use a "variable" file name for inclusion in a linker script. Reason for this is the consolidation of the ppc4xx linker scripts, where some boards (PPC440) include a board specific file (e.g. board/amcc/canyonlands/init.o) into the section "bootpg":
.bootpg RESET_VECTOR_ADDRESS - 0xffc :
{
cpu/ppc4xx/start.o (.bootpg)
board/amcc/canyonlands/init.o (.bootpg)
}Is there a way to write something like this:
.bootpg RESET_VECTOR_ADDRESS - 0xffc :
{
cpu/ppc4xx/start.o (.bootpg)
board/$(BOARDDIR)/init.o (.bootpg)
}in a linker script?
Thanks.
Cheers,
Stefan
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de
Dear Stefan Roese,
Quoted 4 lines · In message <[email protected]> you wrote:
I'm wondering if and how it's possible to use a "variable" file name for inclusion in a linker script. Reason for this is the consolidation of the ppc4xx linker scripts, where some boards (PPC440) include a board specific file (e.g.
board/amcc/canyonlands/init.o) into the section "bootpg":
All linker scripts are run through the C preprocessor...
Quoted 6 lines
.bootpg RESET_VECTOR_ADDRESS - 0xffc :
{
cpu/ppc4xx/start.o (.bootpg)
board/amcc/canyonlands/init.o (.bootpg)
}Quoted 7 lines
Is there a way to write something like this:
.bootpg RESET_VECTOR_ADDRESS - 0xffc : { cpu/ppc4xx/start.o (.bootpg) board/$(BOARDDIR)/init.o (.bootpg) }
Eventually
board/CONFIG_HOSTNAME/init.o (.bootpg)
might work (untested).
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"...this does not mean that some of us should not want, in a rather
dispassionate sort of way, to put a bullet through csh's head."
- Larry Wall in <[email protected]>