CS5535: add a generic clock event MFGPT driver
PATCH 2/6 CS5535: add a generic clock event MFGPT driver
This is based on the old code in arch/x86/kernel/mfgpt_32.c, but is modular and not Geode-specific. There's no reason why the clock event device needs to be registered so early at boot; the clockevent code is perfectly capable of dynamic switching.
Signed-off-by Andres Salomon <[email protected]>
--- drivers/Kconfig | 2 + drivers/clocksource/Kconfig | 9 ++ drivers/clocksource/Makefile | 1 + drivers/clocksource/cs5535-clockevt.c | 196 +++++++++++++++++++++++++++++++++ 4 files changed, 208 insertions(+), 0 deletions(-) create mode 100644 drivers/clocksource/Kconfig create mode 100644 drivers/clocksource/cs5535-clockevt.c
drivers/Kconfig +2 -0
@@ -98,6 +98,8 @@ source "drivers/edac/Kconfig" source "drivers/rtc/Kconfig" +source "drivers/clocksource/Kconfig" + source "drivers/dma/Kconfig" source "drivers/dca/Kconfig"
drivers/clocksource/Kconfig new file +9 -0
@@ -0,0 +1,9 @@ +config CS5535_CLOCK_EVENT_SRC + tristate "CS5535/CS5536 high-res timer (MFGPT) events" + depends on GENERIC_TIME && GENERIC_CLOCKEVENTS && CS5535_MFGPT + help + This driver provides a clock event source based on the MFGPT + timer(s) in the CS5535 and CS5536 companion chips. + MFGPTs have a better resolution and max interval than the + generic PIT, and are suitable for use as high-res timers. +
drivers/clocksource/Makefile +1 -0
@@ -2,6 +2,7 @@ obj-$(CONFIG_ATMEL_TCB_CLKSRC) += tcb_clksrc.o obj-$(CONFIG_X86_CYCLONE_TIMER) += cyclone.o obj-$(CONFIG_X86_PM_TIMER) += acpi_pm.o obj-$(CONFIG_SCx200HR_TIMER) += scx200_hrt.o +obj-$(CONFIG_CS5535_CLOCK_EVENT_SRC) += cs5535-clockevt.o obj-$(CONFIG_SH_TIMER_CMT) += sh_cmt.o obj-$(CONFIG_SH_TIMER_MTU2) += sh_mtu2.o obj-$(CONFIG_SH_TIMER_TMU) += sh_tmu.o
drivers/clocksource/cs5535-clockevt.c new file +196 -0
196 lines not on this page · raw message
Signature · 1 line
1.5.6.5