Skip to contentSkip to conversation

Defining led's triggers as separate class

DISCUSSION Rodolfo Giometti 2 participants 2 messages Nov 11, 2009 – Nov 21, 2009

lore
Share & tools
lore
#0 lore raw

Hello,

it could be sane moving triggers core from leds directory and defining them as a separate class in order to be used by other subsystem?

For instance I have a voltage regulator (which should be logically implemented into current regulator class) who must be enabled/disabled when the LCD is turned on/off... if the driver was implemented as led class then I can use the trigger ledtrig-backlight.c but as regulator I can not.

Thanks for your suggestions,

Rodolfo

Signature · 5 lines
GNU/Linux Solutions                  e-mail: [email protected]
Linux Device Driver                          [email protected]
Embedded Systems                     phone:  +39 349 2432127
UNIX programming                     skype:  rodolfo.giometti
Freelance ICT Italia - Consulente ICT Italia - www.consulenti-ict.it
#1 lore raw
Quoted 10 lines · Rodolfo Giometti

Hello,

it could be sane moving triggers core from leds directory and defining them as a separate class in order to be used by other subsystem?

For instance I have a voltage regulator (which should be logically implemented into current regulator class) who must be enabled/disabled when the LCD is turned on/off... if the driver was implemented as led class then I can use the trigger ledtrig-backlight.c but as regulator I can not.

Well, and then user does echo 'hddactivity' > trigger, and your voltage regulator will have some fun?
Pavel

Signature · 2 lines
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html