new sensor for a t613 camera
Hello.
I bought me a new webcam. lsusb said me it was a 17a1:0128 device, for which the gspca_t613 module is available. But it did not recognize the sensor number, 0x0802.
I fiddled with the driver source code, and just made it recognize it as a 0x0803 sensor, called "others" in the code, and I did get images from the camera. But the colors are extremely wrong, like the contrast was set to a very high number. It's probably some soft of color encoding gone wrong...
How can I start hacking this driver to try to make my camera work under Linux?
Thanks,
++nicolau
Signature · 3 lines
Nicolau Werneck <[email protected]> 1AAB 4050 1999 BDFF 4862 http://www.lti.pcs.usp.br/~nwerneck 4A33 D2B5 648B 4789 0327 Linux user #460716
--
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
2009/11/13 Nicolau Werneck <[email protected]>:
Quoted 6 lines
Hello.
I bought me a new webcam. lsusb said me it was a 17a1:0128 device, for which the
gspca_t613module is available. But it did not recognize the sensor number,0x0802.
Quoted 9 lines
I fiddled with the driver source code, and just made it recognize it as a
0x0803sensor, called "others" in the code, and I did get images from the camera. But the colors are extremely wrong, like the contrast was set to a very high number. It's probably some soft of color encoding gone wrong...How can I start hacking this driver to try to make my camera work under Linux?
If possible you could open the camera to investigate if there is anything printed on the sensor chip. This might give you a clue to what sensor it is.
Best regards,
Erik
Ps. This mailing list is deprecated, use [email protected] instead.
Quoted 24 lines
Thanks,
++nicolau--
Nicolau Werneck <[email protected]> 1AAB 4050 1999 BDFF 4862
http://www.lti.pcs.usp.br/~nwerneck 4A33 D2B5 648B 4789 0327 Linux user #460716-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)iEYEARECAAYFAkr9tK0ACgkQ0rVki0eJAyeHIwCfXRAkTzirALNp/+F2TGlu6E8+ jycAnA4IIh30NnZFxDB/M0da0OiSLmFI
=OfDV
-----END PGP SIGNATURE-------
video4linux-list mailing list
Unsubscribe mailto:[email protected]?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
Quoted 13 lines · Erik Andrén
2009/11/13 Nicolau Werneck <[email protected]>:
Quoted 12 lines
Hello.
I bought me a new webcam. lsusb said me it was a 17a1:0128 device, for which the
gspca_t613module is available. But it did not recognize the sensor number,0x0802.I fiddled with the driver source code, and just made it recognize it as a
0x0803sensor, called "others" in the code, and I did get images from the camera. But the colors are extremely wrong, like the contrast was set to a very high number. It's probably some soft of color encoding gone wrong...
Quoted 7 lines
Quoted 3 lines
How can I start hacking this driver to try to make my camera work under Linux?
If possible you could open the camera to investigate if there is anything printed on the sensor chip. This might give you a clue to what sensor it is.
Thanks for redirecting me.
I opened it (So much for the warranty seal...), but there is just huge black blob of goo over the chip, as usual these days.
++nicolau
Signature · 3 lines
Nicolau Werneck <[email protected]> 1AAB 4050 1999 BDFF 4862 http://www.lti.pcs.usp.br/~nwerneck 4A33 D2B5 648B 4789 0327 Linux user #460716
Hi Nicolau,
Are you able to give me some usb traces?
there's a little how to
http://deaglecito.blogspot.com/2008/10/new-sensor-merge-faq-tascorp-17a10128.html
here.
I don't have too much time now, but i can take a look and made some changes to test and guide you.
Best Regards
Costantino Leandro
Quoted 44 lines · Nicolau Werneck
Quoted 13 lines · Erik Andrén
2009/11/13 Nicolau Werneck <[email protected]>:
Quoted 12 lines
Hello.
I bought me a new webcam. lsusb said me it was a 17a1:0128 device, for which the
gspca_t613module is available. But it did not recognize the sensor number,0x0802.I fiddled with the driver source code, and just made it recognize it as a
0x0803sensor, called "others" in the code, and I did get images from the camera. But the colors are extremely wrong, like the contrast was set to a very high number. It's probably some soft of color encoding gone wrong...Quoted 7 lines
Quoted 3 lines
How can I start hacking this driver to try to make my camera work under Linux?
If possible you could open the camera to investigate if there is anything printed on the sensor chip. This might give you a clue to what sensor it is.
Thanks for redirecting me.
I opened it (So much for the warranty seal...), but there is just huge black blob of goo over the chip, as usual these days.
++nicolau
--
Nicolau Werneck <[email protected]> 1AAB 4050 1999 BDFF 4862
http://www.lti.pcs.usp.br/~nwerneck 4A33 D2B5 648B 4789 0327 Linux user #460716-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)iEYEARECAAYFAkr9wUIACgkQ0rVki0eJAycSegCfRQyYN54CNH2thIo/PHBnVaL9 avAAoMe6ihIbvX23kM1ir2sJK32q6jxm
=HI4V
-----END PGP SIGNATURE-----
OK, I'll try to get a windows box and log it.
I believe the original designer of this camera is a German company named Logilink. I wrote an e-mail to and address in their website, let's see if there is any feedback.
++nicolau
Quoted 12 lines · leandro Costantino
Hi Nicolau,
Are you able to give me some usb traces?
there's a little how to
http://deaglecito.blogspot.com/2008/10/new-sensor-merge-faq-tascorp-17a10128.html
here.I don't have too much time now, but i can take a look and made some changes to test and guide you.
Best Regards
Costantino Leandro
Signature · 3 lines
Nicolau Werneck <[email protected]> 25A1 1BCB 714C 29E7 D84C http://www.lti.pcs.usp.br/~nwerneck 8514 152D 103F B001 8740 Linux user #460716
I wrote an e-mail to the company that seems to have designed this camera of mine, the German LogiLink, and they answered me this morning. Looks like the camera uses the CNLTF LT-168G sensor. Searching for the terms in Google shows some hits regarding the microdia driver, so it might be possible we can even take some stuff from them... Is this true?
So, should I try to get the log anyway, or can we try to do something else now that we have this clue?
Thanks,
++nicolau
Quoted 11 lines · leandro Costantino
Hi Nicolau,
Are you able to give me some usb traces?
there's a little how to
http://deaglecito.blogspot.com/2008/10/new-sensor-merge-faq-tascorp-17a10128.html
here.I don't have too much time now, but i can take a look and made some changes to test and guide you.
Best Regards
Costantino Leandro
Signature · 3 lines
Nicolau Werneck <[email protected]> 1AAB 4050 1999 BDFF 4862 http://www.lti.pcs.usp.br/~nwerneck 4A33 D2B5 648B 4789 0327 Linux user #460716
Hello, people.
I did it! I looked at the log and modified the driver to support my webcam. It's working!! I'm sending an image attached. :]
I'll clean up my code now, and submit a patch later. Help is appreciated, because I don't have much experience contributing to large projects...
This webcam is a very cheap one, quite easy to find these days. I hope the support will be appreciated by many users.
See you,
++nicolau
Quoted 61 lines · leandro Costantino
Hi Nicolau,
Are you able to give me some usb traces?
there's a little how to
http://deaglecito.blogspot.com/2008/10/new-sensor-merge-faq-tascorp-17a10128.html
here.I don't have too much time now, but i can take a look and made some changes to test and guide you.
Best Regards
Costantino LeandroQuoted 35 lines · Nicolau Werneck
Quoted 13 lines · Erik Andrén
2009/11/13 Nicolau Werneck <[email protected]>:
Quoted 12 lines
Hello.
I bought me a new webcam. lsusb said me it was a 17a1:0128 device, for which the
gspca_t613module is available. But it did not recognize the sensor number,0x0802.I fiddled with the driver source code, and just made it recognize it as a
0x0803sensor, called "others" in the code, and I did get images from the camera. But the colors are extremely wrong, like the contrast was set to a very high number. It's probably some soft of color encoding gone wrong...Quoted 7 lines
Quoted 3 lines
How can I start hacking this driver to try to make my camera work under Linux?
If possible you could open the camera to investigate if there is anything printed on the sensor chip. This might give you a clue to what sensor it is.
Thanks for redirecting me.
I opened it (So much for the warranty seal...), but there is just huge black blob of goo over the chip, as usual these days.
++nicolau
--
Nicolau Werneck <[email protected]> 1AAB 4050 1999 BDFF 4862
http://www.lti.pcs.usp.br/~nwerneck 4A33 D2B5 648B 4789 0327 Linux user #460716Quoted 9 lines
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)iEYEARECAAYFAkr9wUIACgkQ0rVki0eJAycSegCfRQyYN54CNH2thIo/PHBnVaL9 avAAoMe6ihIbvX23kM1ir2sJK32q6jxm
=HI4V
-----END PGP SIGNATURE-------
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Signature · 3 lines
Nicolau Werneck <[email protected]> 1AAB 4050 1999 BDFF 4862 http://www.lti.pcs.usp.br/~nwerneck 4A33 D2B5 648B 4789 0327 Linux user #460716
Please, send me the patch for review :)
Quoted 97 lines · Nicolau Werneck
Hello, people.
I did it! I looked at the log and modified the driver to support my webcam. It's working!! I'm sending an image attached. :]
I'll clean up my code now, and submit a patch later. Help is appreciated, because I don't have much experience contributing to large projects...
This webcam is a very cheap one, quite easy to find these days. I hope the support will be appreciated by many users.
See you,
++nicolauQuoted 57 lines · leandro Costantino
Hi Nicolau,
Are you able to give me some usb traces?
there's a little how to
http://deaglecito.blogspot.com/2008/10/new-sensor-merge-faq-tascorp-17a10128.html
here.I don't have too much time now, but i can take a look and made some changes to test and guide you.
Best Regards
Costantino LeandroQuoted 35 lines · Nicolau Werneck
Quoted 13 lines · Erik Andrén
2009/11/13 Nicolau Werneck <[email protected]>:
Quoted 12 lines
Hello.
I bought me a new webcam. lsusb said me it was a 17a1:0128 device, for which the
gspca_t613module is available. But it did not recognize the sensor number,0x0802.I fiddled with the driver source code, and just made it recognize it as a
0x0803sensor, called "others" in the code, and I did get images from the camera. But the colors are extremely wrong, like the contrast was set to a very high number. It's probably some soft of color encoding gone wrong...Quoted 7 lines
Quoted 3 lines
How can I start hacking this driver to try to make my camera work under Linux?
If possible you could open the camera to investigate if there is anything printed on the sensor chip. This might give you a clue to what sensor it is.
Thanks for redirecting me.
I opened it (So much for the warranty seal...), but there is just huge black blob of goo over the chip, as usual these days.
++nicolau
--
Nicolau Werneck <[email protected]> 1AAB 4050 1999 BDFF 4862
http://www.lti.pcs.usp.br/~nwerneck 4A33 D2B5 648B 4789 0327 Linux user #460716Quoted 9 lines
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)iEYEARECAAYFAkr9wUIACgkQ0rVki0eJAycSegCfRQyYN54CNH2thIo/PHBnVaL9 avAAoMe6ihIbvX23kM1ir2sJK32q6jxm
=HI4V
-----END PGP SIGNATURE-----Quoted 4 lines
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html--
Nicolau Werneck <[email protected]> 1AAB 4050 1999 BDFF 4862
http://www.lti.pcs.usp.br/~nwerneck 4A33 D2B5 648B 4789 0327 Linux user #460716-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)iEYEARECAAYFAksDCmgACgkQ0rVki0eJAyfs3QCeJz8skhHixReBoIShZeRiKafv IQ0AoIi24OnTEPe77UUhw8U6RztAMsjO
=5NY4
-----END PGP SIGNATURE-----