Skip to contentSkip to conversation

Parallel Driver(s) Broke in 2.6.31

DISCUSSION Steve Meisner 2 participants 2 messages Nov 16, 2009

lore
Share & tools
lore
#0 lore raw

I posted to the Mandriva forum with no luck yet. I recently upgraded to Mandriva 2010.0 and in doing so lost ability to use my parallel printer. After many hours of debugging effort and finding nothing in logs or hardware/driver error messages, I went on a hunch that it could be related to the kernel. So I rolled back to the 2009.1 kernel 2.6.29 and printing returned. I don't know how to proceed with determining the root cause as I cannot find any error in the logs or differences in hardware detection and module loading. I don't even know the hierarchy of the modules involved
(parport, parport, pc, lp, and ppdev). Should I start diffing those modules
and see if I get lucky applying hacking 101 techniques? Please CC me ([email protected]) if you have any suggestions (except for buying a new printer).
Thanks,

Signature · 1 line
Steve Meisner
#1 lore raw
Quoted 4 lines · On Sun, 15 Nov 2009 21:54:47 -0500 Steve Meisner <[email protected]> wrote:

I posted to the Mandriva forum with no luck yet. I recently upgraded to Mandriva 2010.0 and in doing so lost ability to use my parallel printer. After many hours of debugging effort and finding nothing in logs or hardware/driver error messages, I went on a hunch that it could be related to

Quoted 8 lines

the kernel. So I rolled back to the 2009.1 kernel 2.6.29 and printing returned. I don't know how to proceed with determining the root cause as I cannot find any error in the logs or differences in hardware detection and module loading. I don't even know the hierarchy of the modules involved
(parport, parport, pc, lp, and ppdev). Should I start diffing those modules
and see if I get lucky applying hacking 101 techniques? Please CC me ([email protected]) if you have any suggestions (except for buying a new printer).

Start by looking at the boot messages from each ("dmesg" as a command will show you them after boot).