Skip to contentSkip to conversation

Please pull u-boot-ppc4xx/master

U-Boot Applied Stefan Roese 2 participants 2 messages Nov 17, 2009

lore
Share & tools
lore
#0 lore raw

Hi Wolfgang,

please pull 2 fixes for esd boards with the CAN SJA1000 header. This header should be removed again, when real CAN/SJA1000 support will be added.

Thanks.

The following changes since commit 3c014f1586d5bfe30dca7549396915c83f31cd30:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-net

are available in the git repository at:

git://www.denx.de/git/u-boot-ppc4xx.git master

Matthias Fuchs (3):
Add minimal SJA1000 header for basic CAN mode
ppc4xx: Initialize magnetic couplers in PLU405
ppc4xx: Initialize magnetic coupler on VOM405 boards

 board/esd/plu405/plu405.c |   36 +++++++++++++++++++++++++++
 board/esd/vom405/vom405.c |   35 ++++++++++++++++++++++++++
 include/configs/PLU405.h  |    3 +-
 include/sja1000.h         |   60 +++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 133 insertions(+), 1 deletions(-)
 create mode 100644 include/sja1000.h
#1 lore raw

Dear Stefan Roese,

Quoted 21 lines · In message <[email protected]> you wrote:

Hi Wolfgang,

please pull 2 fixes for esd boards with the CAN SJA1000 header. This header should be removed again, when real CAN/SJA1000 support will be added.

Thanks.

The following changes since commit 3c014f1586d5bfe30dca7549396915c83f31cd30:
Wolfgang Denk (1):
Merge branch 'master' of git://git.denx.de/u-boot-net

are available in the git repository at:

git://www.denx.de/git/u-boot-ppc4xx.git master

Matthias Fuchs (3):
Add minimal SJA1000 header for basic CAN mode
ppc4xx: Initialize magnetic couplers in PLU405
ppc4xx: Initialize magnetic coupler on VOM405 boards

Quoted 6 lines
 board/esd/plu405/plu405.c |   36 +++++++++++++++++++++++++++
 board/esd/vom405/vom405.c |   35 ++++++++++++++++++++++++++
 include/configs/PLU405.h  |    3 +-
 include/sja1000.h         |   60 +++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 133 insertions(+), 1 deletions(-)
 create mode 100644 include/sja1000.h

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"How is this place run - is it an anarchy?"
"No, I wouldn't say so; it is not that well organised..."