drivers/scsi/fnic/fnic_scsi.c: clean up

diff -puN drivers/scsi/fnic/fnic_scsi.c~drivers-scsi-fnic-fnic_scsic-clean-up drivers/scsi/fnic/fnic_scsi.c
@@ -1245,11 +1245,10 @@ int fnic_abort_cmd(struct scsi_cmnd *sc)
 	lp = shost_priv(sc->device->host);
 
 	fnic = lport_priv(lp);
-	FNIC_SCSI_DBG(KERN_DEBUG,
-		      fnic->lport->host,
-		      "Abort Cmd called FCID 0x%x, LUN 0x%x TAG %d\n",
-		      (starget_to_rport(scsi_target(sc->device)))->port_id,
-		      sc->device->lun, sc->request->tag);
+	rport = starget_to_rport(scsi_target(sc->device));
+	FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+			"Abort Cmd called FCID 0x%x, LUN 0x%x TAG %d\n",
+			rport->port_id, sc->device->lun, sc->request->tag);
 
 	if (lp->state != LPORT_ST_READY || !(lp->link_up)) {
 		ret = FAILED;

@@ -1298,7 +1297,6 @@ int fnic_abort_cmd(struct scsi_cmnd *sc)
 	 * port is up, then send abts to the remote port to terminate
 	 * the IO. Else, just locally terminate the IO in the firmware
 	 */
-	rport = starget_to_rport(scsi_target(sc->device));
 	if (fc_remote_port_chkready(rport) == 0)
 		task_req = FCPIO_ITMF_ABT_TASK;
 	else

@@ -1417,7 +1415,6 @@ static int fnic_clean_pending_aborts(str
 	unsigned long flags;
 	int ret = 0;
 	struct scsi_cmnd *sc;
-	struct fc_rport *rport;
 	struct scsi_lun fc_lun;
 	struct scsi_device *lun_dev = lr_sc->device;
 	DECLARE_COMPLETION_ONSTACK(tm_done);

@@ -1457,7 +1454,6 @@ static int fnic_clean_pending_aborts(str
 
 		/* Now queue the abort command to firmware */
 		int_to_scsilun(sc->device->lun, &fc_lun);
-		rport = starget_to_rport(scsi_target(sc->device));
 
 		if (fnic_queue_abort_io_req(fnic, tag,
 					    FCPIO_ITMF_ABT_TASK_TERM,

@@ -1527,18 +1523,16 @@ int fnic_device_reset(struct scsi_cmnd *
 	lp = shost_priv(sc->device->host);
 
 	fnic = lport_priv(lp);
-	FNIC_SCSI_DBG(KERN_DEBUG,
-		      fnic->lport->host,
-		      "Device reset called FCID 0x%x, LUN 0x%x\n",
-		      (starget_to_rport(scsi_target(sc->device)))->port_id,
-		      sc->device->lun);
 
+	rport = starget_to_rport(scsi_target(sc->device));
+	FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+			"Device reset called FCID 0x%x, LUN 0x%x\n",
+			rport->port_id, sc->device->lun);
 
 	if (lp->state != LPORT_ST_READY || !(lp->link_up))
 		goto fnic_device_reset_end;
 
 	/* Check if remote port up */
-	rport = starget_to_rport(scsi_target(sc->device));
 	if (fc_remote_port_chkready(rport))
 		goto fnic_device_reset_end;