Omap mux changes for v2.6.33 merge window, v2

index c18a94e..64250c5 100644
@@ -35,7 +35,27 @@
 
 #ifdef CONFIG_OMAP_MUX
 
+#define OMAP_MUX_BASE_OFFSET		0x30	/* Offset from CTRL_BASE */
+#define OMAP_MUX_BASE_SZ		0x5ca
+
 static struct omap_mux_cfg arch_mux_cfg;
+static void __iomem *mux_base;
+
+static inline u16 omap_mux_read(u16 reg)
+{
+	if (cpu_is_omap24xx())
+		return __raw_readb(mux_base + reg);
+	else
+		return __raw_readw(mux_base + reg);
+}
+
+static inline void omap_mux_write(u16 val, u16 reg)
+{
+	if (cpu_is_omap24xx())
+		__raw_writeb(val, mux_base + reg);
+	else
+		__raw_writew(val, mux_base + reg);
+}
 
 /* NOTE: See mux.h for the enumeration */
 

@@ -581,10 +601,7 @@ static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 r
 	u16 orig;
 	u8 warn = 0, debug = 0;
 
-	if (cpu_is_omap24xx())
-		orig = omap_ctrl_readb(cfg->mux_reg);
-	else
-		orig = omap_ctrl_readw(cfg->mux_reg);
+	orig = omap_mux_read(cfg->mux_reg - OMAP_MUX_BASE_OFFSET);
 
 #ifdef	CONFIG_OMAP_MUX_DEBUG
 	debug = cfg->debug;

@@ -614,7 +631,7 @@ static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
 	if (cfg->pu_pd_val)
 		reg |= OMAP2_PULL_UP;
 	omap2_cfg_debug(cfg, reg);
-	omap_ctrl_writeb(reg, cfg->mux_reg);
+	omap_mux_write(reg, cfg->mux_reg - OMAP_MUX_BASE_OFFSET);
 	spin_unlock_irqrestore(&mux_spin_lock, flags);
 
 	return 0;

@@ -633,7 +650,7 @@ static int __init_or_module omap34xx_cfg_reg(const struct pin_config *cfg)
 	spin_lock_irqsave(&mux_spin_lock, flags);
 	reg |= cfg->mux_val;
 	omap2_cfg_debug(cfg, reg);
-	omap_ctrl_writew(reg, cfg->mux_reg);
+	omap_mux_write(reg, cfg->mux_reg - OMAP_MUX_BASE_OFFSET);
 	spin_unlock_irqrestore(&mux_spin_lock, flags);
 
 	return 0;

@@ -644,6 +661,21 @@ static int __init_or_module omap34xx_cfg_reg(const struct pin_config *cfg)
 
 int __init omap2_mux_init(void)
 {
+	u32 mux_pbase;
+
+	if (cpu_is_omap2420())
+		mux_pbase = OMAP2420_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
+	else if (cpu_is_omap2430())
+		mux_pbase = OMAP243X_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
+	else if (cpu_is_omap34xx())
+		mux_pbase = OMAP343X_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
+
+	mux_base = ioremap(mux_pbase, OMAP_MUX_BASE_SZ);
+	if (!mux_base) {
+		printk(KERN_ERR "mux: Could not ioremap\n");
+		return -ENODEV;
+	}
+
 	if (cpu_is_omap24xx()) {
 		arch_mux_cfg.pins	= omap24xx_pins;
 		arch_mux_cfg.size	= OMAP24XX_PINS_SZ;

476 lines not on this page · raw message

160 lines not on this page · raw message

index 05aebca..0670363 100644
@@ -54,8 +54,12 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
 {
 	struct pin_config *reg;
 
-	if (cpu_is_omap44xx())
-		return 0;
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
+		printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
+				index);
+		WARN_ON(1);
+		return -EINVAL;
+	}
 
 	if (mux_cfg == NULL) {
 		printk(KERN_ERR "Pin mux table not initialized\n");

index bebe9cc..a6bd58f 100644
@@ -7,6 +7,8 @@
  * published by the Free Software Foundation.
  */
 
+#include "mux34xx.h"
+
 #define OMAP_MUX_TERMINATOR	0xffff
 
 /* 34xx mux mode options for each pin. See TRM for options */

1,579 lines not on this page · raw message

356 lines not on this page · raw message

index 5bda9fd..e5d9118 100644
@@ -42,6 +42,7 @@
 #include <plat/control.h>
 #include <plat/gpmc-smc91x.h>
 
+#include "mux.h"
 #include "sdram-qimonda-hyb18m512160af-6.h"
 #include "mmc-twl4030.h"
 

@@ -640,8 +641,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.reset_gpio_port[2]  = -EINVAL
 };
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap_3430sdp_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3430_i2c_init();
 	platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
 	if (omap_rev() > OMAP3430_REV_ES1_0)

index 415a13d..b4e6eca 100644
@@ -30,6 +30,8 @@
 #include <plat/common.h>
 #include <plat/usb.h>
 
+#include "mux.h"
+
 /*
  * Board initialization
  */

@@ -60,8 +62,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
 	.reset_gpio_port[2]  = -EINVAL
 };
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init am3517_evm_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	platform_add_devices(am3517_evm_devices,
 				ARRAY_SIZE(am3517_evm_devices));
 

index 22c4529..84321f6 100644
@@ -45,6 +45,7 @@
 
 #include <mach/hardware.h>
 
+#include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 

@@ -482,8 +483,17 @@ static void __init cm_t35_map_io(void)
 	omap2_map_common_io();
 }
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init cm_t35_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
 	omap_serial_init();
 	cm_t35_init_i2c();
 	cm_t35_init_nand();

index fa62e80..7e3217a 100644
@@ -30,6 +30,7 @@
 #include <plat/mux.h>
 #include <plat/usb.h>
 
+#include "mux.h"
 #include "mmc-twl4030.h"
 
 #define IGEP2_SMSC911X_CS       5

@@ -203,8 +204,17 @@ static int __init igep2_i2c_init(void)
 	return 0;
 }
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init igep2_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	igep2_i2c_init();
 	omap_serial_init();
 	usb_musb_init();

index c062238..3743173 100644
@@ -43,6 +43,7 @@
 #include <plat/control.h>
 #include <plat/usb.h>
 
+#include "mux.h"
 #include "mmc-twl4030.h"
 
 #define LDP_SMSC911X_CS		1

@@ -374,8 +375,17 @@ static struct platform_device *ldp_devices[] __initdata = {
 	&ldp_gpio_keys_device,
 };
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap_ldp_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_i2c_init();
 	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
 	ts_gpio = 54;

index 41480bd..e669dbb 100644
@@ -45,6 +45,7 @@
 #include <plat/usb.h>
 #include <plat/timer-gp.h>
 
+#include "mux.h"
 #include "mmc-twl4030.h"
 
 #define GPMC_CS0_BASE  0x60

@@ -422,8 +423,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.reset_gpio_port[2]  = -EINVAL
 };
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap3_beagle_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3_beagle_i2c_init();
 	platform_add_devices(omap3_beagle_devices,
 			ARRAY_SIZE(omap3_beagle_devices));

index 5efc2e9..ad174ae 100644
@@ -43,6 +43,7 @@
 #include <plat/common.h>
 #include <plat/mcspi.h>
 
+#include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 

@@ -422,9 +423,18 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.reset_gpio_port[2]  = -EINVAL
 };
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap3_evm_init(void)
 {
 	omap3_evm_get_revision();
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 
 	omap3_evm_i2c_init();
 

index 2db5ba5..9f59c03 100644
@@ -42,6 +42,7 @@
 #include <plat/usb.h>
 #include <plat/mux.h>
 
+#include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 

@@ -409,8 +410,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.reset_gpio_port[2]  = -EINVAL
 };
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap3pandora_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3pandora_i2c_init();
 	platform_add_devices(omap3pandora_devices,
 			ARRAY_SIZE(omap3pandora_devices));

index 52dfd51..40f3c85 100644
@@ -47,6 +47,7 @@
 #include <plat/mux.h>
 #include <plat/usb.h>
 
+#include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 

@@ -405,9 +406,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
 	.reset_gpio_port[2]  = -EINVAL
 };
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
 
 static void __init overo_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	overo_i2c_init();
 	platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
 	omap_serial_init();

index 1bb1de2..c0c99ad 100644
@@ -30,6 +30,8 @@
 #include <plat/gpmc.h>
 #include <plat/usb.h>
 
+#include "mux.h"
+
 struct omap_sdrc_params *rx51_get_sdram_timings(void);
 
 static struct omap_lcd_config rx51_lcd_config = {

@@ -69,8 +71,17 @@ static void __init rx51_init_irq(void)
 
 extern void __init rx51_peripherals_init(void);
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init rx51_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_serial_init();
 	usb_musb_init();
 	rx51_peripherals_init();

index 2f980e3..1e615e2 100644
@@ -23,6 +23,7 @@
 
 #include <mach/board-zoom.h>
 
+#include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 
 static void __init omap_zoom2_init_irq(void)

@@ -58,8 +59,17 @@ static struct twl4030_platform_data zoom2_twldata = {
 
 #endif
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap_zoom2_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	zoom_peripherals_init();
 	zoom_debugboard_init();
 }

index b082b50..d968433 100644
@@ -28,6 +28,10 @@
 #include <linux/io.h>
 #include <linux/spinlock.h>
 #include <linux/list.h>
+#include <linux/ctype.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
 
 #include <asm/system.h>
 

@@ -44,6 +48,7 @@ struct omap_mux_entry {
 	struct list_head	node;
 };
 
+static unsigned long mux_phys;
 static void __iomem *mux_base;
 
 static inline u16 omap_mux_read(u16 reg)

@@ -807,6 +812,225 @@ int __init omap_mux_init_signal(char *muxname, int val)
 	return -ENODEV;
 }
 
+#ifdef CONFIG_DEBUG_FS
+
+#define OMAP_MUX_MAX_NR_FLAGS	10
+#define OMAP_MUX_TEST_FLAG(val, mask)				\
+	if (((val) & (mask)) == (mask)) {			\
+		i++;						\
+		flags[i] =  #mask;				\
+	}
+
+/* REVISIT: Add checking for non-optimal mux settings */
+static inline void omap_mux_decode(struct seq_file *s, u16 val)
+{
+	char *flags[OMAP_MUX_MAX_NR_FLAGS];
+	char mode[14];
+	int i = -1;
+
+	sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7);
+	i++;
+	flags[i] = mode;
+
+	OMAP_MUX_TEST_FLAG(val, OMAP_PIN_OFF_WAKEUPENABLE);
+	if (val & OMAP_OFF_EN) {
+		if (!(val & OMAP_OFFOUT_EN)) {
+			if (!(val & OMAP_OFF_PULL_UP)) {
+				OMAP_MUX_TEST_FLAG(val,
+					OMAP_PIN_OFF_INPUT_PULLDOWN);
+			} else {
+				OMAP_MUX_TEST_FLAG(val,
+					OMAP_PIN_OFF_INPUT_PULLUP);
+			}
+		} else {
+			if (!(val & OMAP_OFFOUT_VAL)) {
+				OMAP_MUX_TEST_FLAG(val,
+					OMAP_PIN_OFF_OUTPUT_LOW);
+			} else {
+				OMAP_MUX_TEST_FLAG(val,
+					OMAP_PIN_OFF_OUTPUT_HIGH);
+			}
+		}
+	}
+
+	if (val & OMAP_INPUT_EN) {
+		if (val & OMAP_PULL_ENA) {
+			if (!(val & OMAP_PULL_UP)) {
+				OMAP_MUX_TEST_FLAG(val,
+					OMAP_PIN_INPUT_PULLDOWN);
+			} else {
+				OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT_PULLUP);
+			}
+		} else {
+			OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT);
+		}
+	} else {
+		i++;
+		flags[i] = "OMAP_PIN_OUTPUT";
+	}
+
+	do {
+		seq_printf(s, "%s", flags[i]);
+		if (i > 0)
+			seq_printf(s, " | ");
+	} while (i-- > 0);
+}
+
+#define OMAP_MUX_DEFNAME_LEN	16
+
+static int omap_mux_dbg_board_show(struct seq_file *s, void *unused)
+{
+	struct omap_mux_entry *e;
+
+	list_for_each_entry(e, &muxmodes, node) {
+		struct omap_mux *m = &e->mux;
+		char m0_def[OMAP_MUX_DEFNAME_LEN];
+		char *m0_name = m->muxnames[0];
+		u16 val;
+		int i, mode;
+
+		if (!m0_name)
+			continue;
+
+		for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) {
+			if (m0_name[i] == '\0') {
+				m0_def[i] = m0_name[i];
+				break;
+			}
+			m0_def[i] = toupper(m0_name[i]);
+		}
+		val = omap_mux_read(m->reg_offset);
+		mode = val & OMAP_MUX_MODE7;
+
+		seq_printf(s, "OMAP%i_MUX(%s, ",
+					cpu_is_omap34xx() ? 3 : 0, m0_def);
+		omap_mux_decode(s, val);
+		seq_printf(s, "),\n");
+	}
+
+	return 0;
+}
+
+static int omap_mux_dbg_board_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, omap_mux_dbg_board_show, &inode->i_private);
+}
+
+static const struct file_operations omap_mux_dbg_board_fops = {
+	.open		= omap_mux_dbg_board_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int omap_mux_dbg_signal_show(struct seq_file *s, void *unused)
+{
+	struct omap_mux *m = s->private;
+	const char *none = "NA";
+	u16 val;
+	int mode;
+
+	val = omap_mux_read(m->reg_offset);
+	mode = val & OMAP_MUX_MODE7;
+
+	seq_printf(s, "name: %s.%s (0x%08lx/0x%03x = 0x%04x), b %s, t %s\n",
+			m->muxnames[0], m->muxnames[mode],
+			mux_phys + m->reg_offset, m->reg_offset, val,
+			m->balls[0] ? m->balls[0] : none,
+			m->balls[1] ? m->balls[1] : none);
+	seq_printf(s, "mode: ");
+	omap_mux_decode(s, val);
+	seq_printf(s, "\n");
+	seq_printf(s, "signals: %s | %s | %s | %s | %s | %s | %s | %s\n",
+			m->muxnames[0] ? m->muxnames[0] : none,
+			m->muxnames[1] ? m->muxnames[1] : none,
+			m->muxnames[2] ? m->muxnames[2] : none,
+			m->muxnames[3] ? m->muxnames[3] : none,
+			m->muxnames[4] ? m->muxnames[4] : none,
+			m->muxnames[5] ? m->muxnames[5] : none,
+			m->muxnames[6] ? m->muxnames[6] : none,
+			m->muxnames[7] ? m->muxnames[7] : none);
+
+	return 0;
+}
+
+#define OMAP_MUX_MAX_ARG_CHAR  7
+
+static ssize_t omap_mux_dbg_signal_write(struct file *file,
+						const char __user *user_buf,
+						size_t count, loff_t *ppos)
+{
+	char buf[OMAP_MUX_MAX_ARG_CHAR];
+	struct seq_file *seqf;
+	struct omap_mux *m;
+	unsigned long val;
+	int buf_size, ret;
+
+	if (count > OMAP_MUX_MAX_ARG_CHAR)
+		return -EINVAL;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) - 1);
+
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+
+	ret = strict_strtoul(buf, 0x10, &val);
+	if (ret < 0)
+		return ret;
+
+	if (val > 0xffff)
+		return -EINVAL;
+
+	seqf = file->private_data;
+	m = seqf->private;
+
+	omap_mux_write((u16)val, m->reg_offset);
+	*ppos += count;
+
+	return count;
+}
+
+static int omap_mux_dbg_signal_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, omap_mux_dbg_signal_show, inode->i_private);
+}
+
+static const struct file_operations omap_mux_dbg_signal_fops = {
+	.open		= omap_mux_dbg_signal_open,
+	.read		= seq_read,
+	.write		= omap_mux_dbg_signal_write,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static struct dentry *mux_dbg_dir;
+
+static void __init omap_mux_dbg_init(void)
+{
+	struct omap_mux_entry *e;
+
+	mux_dbg_dir = debugfs_create_dir("omap_mux", NULL);
+	if (!mux_dbg_dir)
+		return;
+
+	(void)debugfs_create_file("board", S_IRUGO, mux_dbg_dir,
+					NULL, &omap_mux_dbg_board_fops);
+
+	list_for_each_entry(e, &muxmodes, node) {
+		struct omap_mux *m = &e->mux;
+
+		(void)debugfs_create_file(m->muxnames[0], S_IWUGO, mux_dbg_dir,
+					m, &omap_mux_dbg_signal_fops);
+	}
+}
+
+#else
+static inline void omap_mux_dbg_init(void)
+{
+}
+#endif	/* CONFIG_DEBUG_FS */
+
 static void __init omap_mux_free_names(struct omap_mux *m)
 {
 	int i;

@@ -843,6 +1067,8 @@ static int __init omap_mux_late_init(void)
 
 	}
 
+	omap_mux_dbg_init();
+
 	return 0;
 }
 late_initcall(omap_mux_late_init);

@@ -1107,6 +1333,7 @@ int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
 	if (mux_base)
 		return -EBUSY;
 
+	mux_phys = mux_pbase;
 	mux_base = ioremap(mux_pbase, mux_size);
 	if (!mux_base) {
 		printk(KERN_ERR "mux: Could not ioremap\n");

new file mode 100644
index 0000000..bc9d12b
@@ -0,0 +1,33 @@
+/*
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <plat/i2c.h>
+#include <plat/mux.h>
+
+int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
+			  struct i2c_board_info const *info,
+			  unsigned len)
+{
+	omap_cfg_reg(I2C_SDA);
+	omap_cfg_reg(I2C_SCL);
+
+	return omap_plat_register_i2c_bus(bus_id, clkrate, info, len);
+}

56 lines not on this page · raw message

70 lines not on this page · raw message

index 064f173..754fbc8 100644
@@ -27,7 +27,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
 #define __ARCH_ARM_MACH_OMAP_COMMON_H
 
-#include <linux/i2c.h>
+#include <plat/i2c.h>
 
 struct sys_timer;
 

@@ -36,18 +36,6 @@ extern void __iomem *gic_cpu_base_addr;
 
 extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
-#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
-extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
-				 struct i2c_board_info const *info,
-				 unsigned len);
-#else
-static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
-				 struct i2c_board_info const *info,
-				 unsigned len)
-{
-	return 0;
-}
-#endif
 
 /* IO bases for various OMAP processors */
 struct omap_globals {

new file mode 100644
index 0000000..585d9ca
@@ -0,0 +1,39 @@
+/*
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/i2c.h>
+
+#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
+extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
+				 struct i2c_board_info const *info,
+				 unsigned len);
+#else
+static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
+				 struct i2c_board_info const *info,
+				 unsigned len)
+{
+	return 0;
+}
+#endif
+
+int omap_plat_register_i2c_bus(int bus_id, u32 clkrate,
+				 struct i2c_board_info const *info,
+				 unsigned len);

index e5d9118..ded3e87 100644
@@ -626,7 +626,9 @@ static inline void board_smc91x_init(void)
 
 static void enable_board_wakeup_source(void)
 {
-	omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
+	/* T2 interrupt line (keypad) */
+	omap_mux_init_signal("sys_nirq",
+		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
 static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {

index 348b70b..e6cbc27 100755
@@ -23,6 +23,7 @@
 
 #include <mach/board-zoom.h>
 
+#include "mux.h"
 #include "sdram-hynix-h8mbx00u0mer-0em.h"
 
 #if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)

@@ -48,7 +49,9 @@ static inline void board_smc91x_init(void)
 
 static void enable_board_wakeup_source(void)
 {
-	omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
+	/* T2 interrupt line (keypad) */
+	omap_mux_init_signal("sys_nirq",
+		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
 static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {

index 84321f6..10a5955 100644
@@ -503,7 +503,8 @@ static void __init cm_t35_init(void)
 
 	usb_musb_init();
 
-	omap_cfg_reg(AF26_34XX_SYS_NIRQ);
+	omap_mux_init_signal("sys_nirq",
+		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
 MACHINE_START(CM_T35, "Compulab CM-T35")

index e669dbb..9e606b1 100644
@@ -141,10 +141,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
 	if (system_rev >= 0x20 && system_rev <= 0x34301000) {
-		omap_cfg_reg(AG9_34XX_GPIO23);
+		omap_mux_init_gpio(23, OMAP_PIN_INPUT);
 		mmc[0].gpio_wp = 23;
 	} else {
-		omap_cfg_reg(AH8_34XX_GPIO29);
+		omap_mux_init_gpio(29, OMAP_PIN_INPUT);
 	}
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;

@@ -439,7 +439,7 @@ static void __init omap3_beagle_init(void)
 			ARRAY_SIZE(omap3_beagle_devices));
 	omap_serial_init();
 
-	omap_cfg_reg(J25_34XX_GPIO170);
+	omap_mux_init_gpio(170, OMAP_PIN_INPUT);
 	gpio_request(170, "DVI_nPD");
 	/* REVISIT leave DVI powered down until it's needed ... */
 	gpio_direction_output(170, true);

@@ -449,8 +449,8 @@ static void __init omap3_beagle_init(void)
 	omap3beagle_flash_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_cfg_reg(H16_34XX_SDRC_CKE0);
-	omap_cfg_reg(H17_34XX_SDRC_CKE1);
+	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
 static void __init omap3_beagle_map_io(void)

index ad174ae..0457f61 100644
@@ -224,7 +224,7 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	omap_cfg_reg(L8_34XX_GPIO63);
+	omap_mux_init_gpio(63, OMAP_PIN_INPUT);
 	mmc[0].gpio_cd = gpio + 0;
 	twl4030_mmc_init(mmc);
 

@@ -450,24 +450,24 @@ static void __init omap3_evm_init(void)
 #endif
 	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
 		/* enable EHCI VBUS using GPIO22 */
-		omap_cfg_reg(AF9_34XX_GPIO22);
+		omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP);
 		gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS");
 		gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0);
 		gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1);
 
 		/* Select EHCI port on main board */
-		omap_cfg_reg(U3_34XX_GPIO61);
+		omap_mux_init_gpio(61, OMAP_PIN_INPUT_PULLUP);
 		gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port");
 		gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0);
 		gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0);
 
 		/* setup EHCI phy reset config */
-		omap_cfg_reg(AH14_34XX_GPIO21);
+		omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
 		ehci_pdata.reset_gpio_port[1] = 21;
 
 	} else {
 		/* setup EHCI phy reset on MDC */
-		omap_cfg_reg(AF4_34XX_GPIO135_OUT);
+		omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
 		ehci_pdata.reset_gpio_port[1] = 135;
 	}
 	usb_musb_init();

index 9f59c03..bca5ad9 100644
@@ -433,8 +433,8 @@ static void __init omap3pandora_init(void)
 	usb_musb_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_cfg_reg(H16_34XX_SDRC_CKE0);
-	omap_cfg_reg(H17_34XX_SDRC_CKE1);
+	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
 static void __init omap3pandora_map_io(void)

index 40f3c85..1ebde4c 100644
@@ -427,8 +427,8 @@ static void __init overo_init(void)
 	overo_init_smsc911x();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_cfg_reg(H16_34XX_SDRC_CKE0);
-	omap_cfg_reg(H17_34XX_SDRC_CKE1);
+	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 
 	if ((gpio_request(OVERO_GPIO_W2W_NRESET,
 			  "OVERO_GPIO_W2W_NRESET") == 0) &&

index 4f347f8..f903104 100644
@@ -33,6 +33,7 @@
 #include <plat/onenand.h>
 #include <plat/gpmc-smc91x.h>
 
+#include "mux.h"
 #include "mmc-twl4030.h"
 
 #define SYSTEM_REV_B_USES_VAUX3	0x1699

@@ -630,9 +631,9 @@ static struct omap_smc91x_platform_data board_smc91x_data = {
 
 static void __init board_smc91x_init(void)
 {
-	omap_cfg_reg(U8_34XX_GPIO54_DOWN);
-	omap_cfg_reg(G25_34XX_GPIO86_OUT);
-	omap_cfg_reg(H19_34XX_GPIO164_OUT);
+	omap_mux_init_gpio(54, OMAP_PIN_INPUT_PULLDOWN);
+	omap_mux_init_gpio(86, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(164, OMAP_PIN_OUTPUT);
 
 	gpmc_smc91x_init(&board_smc91x_data);
 }

index c0c99ad..fd71c00 100644
@@ -87,8 +87,8 @@ static void __init rx51_init(void)
 	rx51_peripherals_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_cfg_reg(H16_34XX_SDRC_CKE0);
-	omap_cfg_reg(H17_34XX_SDRC_CKE1);
+	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
 static void __init rx51_map_io(void)

90 lines not on this page · raw message

194 lines not on this page · raw message

index ded3e87..4cfb7b6 100644
@@ -31,7 +31,6 @@
 #include <asm/mach/map.h>
 
 #include <plat/mcspi.h>
-#include <plat/mux.h>
 #include <plat/board.h>
 #include <plat/usb.h>
 #include <plat/common.h>

index 10a5955..507c922 100644
@@ -38,7 +38,6 @@
 
 #include <plat/board.h>
 #include <plat/common.h>
-#include <plat/mux.h>
 #include <plat/nand.h>
 #include <plat/gpmc.h>
 #include <plat/usb.h>

index 7e3217a..44239e3 100644
@@ -27,7 +27,6 @@
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/gpmc.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 
 #include "mux.h"

index 9e606b1..6ada802 100644
@@ -41,7 +41,6 @@
 #include <plat/common.h>
 #include <plat/gpmc.h>
 #include <plat/nand.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/timer-gp.h>
 

index 0457f61..18913e9 100644
@@ -38,7 +38,6 @@
 #include <asm/mach/map.h>
 
 #include <plat/board.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/common.h>
 #include <plat/mcspi.h>

index bca5ad9..c1cc99c 100644
@@ -40,7 +40,6 @@
 #include <mach/hardware.h>
 #include <plat/mcspi.h>
 #include <plat/usb.h>
-#include <plat/mux.h>
 
 #include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"

index 1ebde4c..5b78a87 100644
@@ -44,7 +44,6 @@
 #include <plat/gpmc.h>
 #include <mach/hardware.h>
 #include <plat/nand.h>
-#include <plat/mux.h>
 #include <plat/usb.h>
 
 #include "mux.h"

index fd71c00..67bb347 100644
@@ -23,7 +23,6 @@
 #include <asm/mach/map.h>
 
 #include <plat/mcspi.h>
-#include <plat/mux.h>
 #include <plat/board.h>
 #include <plat/common.h>
 #include <plat/dma.h>

index 6a4d8e4..b632ea0 100644
@@ -34,6 +34,7 @@
 #include <plat/gpmc.h>
 #include <plat/serial.h>
 #include <plat/vram.h>
+#include <plat/mux.h>
 
 #ifndef CONFIG_ARCH_OMAP4	/* FIXME: Remove this once clkdev is ready */
 #include "clock.h"

416 lines not on this page · raw message

255 lines not on this page · raw message

index e6cbc27..7390596 100755
@@ -85,8 +85,17 @@ static void __init omap_sdp_init_irq(void)
 	omap_gpio_init();
 }
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap_sdp_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
 	zoom_peripherals_init();
 	board_smc91x_init();
 	enable_board_wakeup_source();

index 8d965a6..a9fe918 100644
@@ -21,6 +21,7 @@
 #include <plat/common.h>
 #include <plat/board.h>
 
+#include "mux.h"
 #include "sdram-hynix-h8mbx00u0mer-0em.h"
 
 static void __init omap_zoom_map_io(void)

@@ -42,8 +43,17 @@ static void __init omap_zoom_init_irq(void)
 	omap_gpio_init();
 }
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap_zoom_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
 	zoom_peripherals_init();
 	zoom_debugboard_init();
 }

index a6bd58f..d8b4d5a 100644
@@ -56,6 +56,7 @@
 
 /* Flags for omap_mux_init */
 #define OMAP_PACKAGE_MASK		0xffff
+#define OMAP_PACKAGE_CBP		4		/* 515-pin 0.40 0.50 */
 #define OMAP_PACKAGE_CUS		3		/* 423-pin 0.65 */
 #define OMAP_PACKAGE_CBB		2		/* 515-pin 0.40 0.50 */
 #define OMAP_PACKAGE_CBC		1		/* 515-pin 0.50 0.65 */

532 lines not on this page · raw message

70 lines not on this page · raw message