Skip to contentSkip to conversation

core/rcu for v2.6.33

GIT PULL Ingo Molnar 1 participant 1 message Dec 3, 2009

Subsystems (4)
lore
Share & tools
lore
#0 lore raw

Linus,

Please pull the latest core-rcu-for-linus git tree from:

git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git core-rcu-for-linus

Highlights:

- RCU-Tiny

- various difficult fixes for rare hangs

- lots of cleanups

- debuggability improvements

- Enable the RCU stall-detector by default (the Kconfig option has been available for some time but default-off - so most people have it off already). This can find RCU bugs and it can also report hangs elsewhere in the kernel.

Thanks,

Ingo

------------------>
Ingo Molnar (1):
rcu: Do tiny cleanups in rcutiny

Lai Jiangshan (1):
rcu: Cleanup: balance rcu_irq_enter()/rcu_irq_exit() calls

Paul E. McKenney (28):
rcu: Add rnp->blocked_tasks to tracing
rcu: Update trace.txt documentation to reflect recent changes
rcu: Update trace.txt documentation for blocked-tasks lists
rcu: "Tiny RCU", The Bloatwatch Edition
rcu: Add synchronize_srcu_expedited()
rcu: Add synchronize_srcu_expedited() to the rcutorture test suite
rcu: Add synchronize_srcu_expedited() to the documentation
rcu: Improve rcutorture diagnostics when bad torture_type specified
rcu: Fix TINY_RCU #elif condition
rcu: Prepare for synchronization fixes: clean up for non-NO_HZ handling of ->completed counter
rcu: Fix synchronization for rcu_process_gp_end() uses of ->completed counter
rcu: Fix note_new_gpnum() uses of ->gpnum
rcu: Remove inline from forward-referenced functions
rcu: Enable synchronize_sched_expedited() fastpath
rcu: Rename dynticks_completed to completed_fqs
rcu: Simplify association of quiescent states with grace periods
rcu: Mark init-time-only rcu_bootup_announce() as __init
rcu: Accelerate callback processing on CPUs not detecting GP end
rcu: Simplify association of forced quiescent states with grace periods
rcu: Further cleanups of use of lastcomp
rcu: Eliminate __rcu_pending() false positives
rcu: Fix grace-period-stall bug on large systems with CPU hotplug
rcu: Eliminate unneeded function wrapping
rcu: Re-arrange code to reduce #ifdef pain
rcu: Rename "quiet" functions
rcu: Enable fourth level of TREE_RCU hierarchy
rcu: Add expedited grace-period support for preemptible RCU
rcu: Make RCU's CPU-stall detector be default

Peter Zijlstra (1):
rcu: Simplify creating of lockdep class for root rcu_node

 Documentation/RCU/trace.txt     |  254 ++++-----------------
 Documentation/RCU/whatisRCU.txt |    2 +-
 include/linux/hardirq.h         |   24 ++
 include/linux/rcupdate.h        |   10 +-
 include/linux/rcutiny.h         |  104 +++++++++
 include/linux/rcutree.h         |    7 +-
 include/linux/srcu.h            |    1 +
 init/Kconfig                    |    9 +
 kernel/Makefile                 |    1 +
 kernel/rcupdate.c               |  122 ----------
 kernel/rcutiny.c                |  282 ++++++++++++++++++++++++
 kernel/rcutorture.c             |   65 +++++-
 kernel/rcutree.c                |  465 ++++++++++++++++++++++++++-------------
 kernel/rcutree.h                |   69 +++++-
 kernel/rcutree_plugin.h         |  309 +++++++++++++++++++++++---
 kernel/rcutree_trace.c          |   12 +-
 kernel/sched.c                  |    1 +
 kernel/softirq.c                |    2 +-
 kernel/srcu.c                   |   74 +++++--
 lib/Kconfig.debug               |    2 +-
 20 files changed, 1234 insertions(+), 581 deletions(-)
 create mode 100644 include/linux/rcutiny.h
 create mode 100644 kernel/rcutiny.c
Documentation/RCU/trace.txt +49 -205
index 187bbf1..8608fd8 100644
@@ -1,185 +1,10 @@
 CONFIG_RCU_TRACE debugfs Files and Formats
 
 
-The rcupreempt and rcutree implementations of RCU provide debugfs trace
-output that summarizes counters and state.  This information is useful for
-debugging RCU itself, and can sometimes also help to debug abuses of RCU.
-Note that the rcuclassic implementation of RCU does not provide debugfs
-trace output.
-
-The following sections describe the debugfs files and formats for
-preemptable RCU (rcupreempt) and hierarchical RCU (rcutree).
-
-
-Preemptable RCU debugfs Files and Formats
-
-This implementation of RCU provides three debugfs files under the
-top-level directory RCU: rcu/rcuctrs (which displays the per-CPU
-counters used by preemptable RCU) rcu/rcugp (which displays grace-period
-counters), and rcu/rcustats (which internal counters for debugging RCU).
-
-The output of "cat rcu/rcuctrs" looks as follows:
-
-CPU last cur F M
-  0    5  -5 0 0
-  1   -1   0 0 0
-  2    0   1 0 0
-  3    0   1 0 0
-  4    0   1 0 0
-  5    0   1 0 0
-  6    0   2 0 0
-  7    0  -1 0 0
-  8    0   1 0 0
-ggp = 26226, state = waitzero
-
-The per-CPU fields are as follows:
-
-o	"CPU" gives the CPU number.  Offline CPUs are not displayed.
-
-o	"last" gives the value of the counter that is being decremented
-	for the current grace period phase.  In the example above,
-	the counters sum to 4, indicating that there are still four
-	RCU read-side critical sections still running that started
-	before the last counter flip.
-
-o	"cur" gives the value of the counter that is currently being
-	both incremented (by rcu_read_lock()) and decremented (by
-	rcu_read_unlock()).  In the example above, the counters sum to
-	1, indicating that there is only one RCU read-side critical section
-	still running that started after the last counter flip.
-
-o	"F" indicates whether RCU is waiting for this CPU to acknowledge
-	a counter flip.  In the above example, RCU is not waiting on any,
-	which is consistent with the state being "waitzero" rather than
-	"waitack".
-
-o	"M" indicates whether RCU is waiting for this CPU to execute a
-	memory barrier.  In the above example, RCU is not waiting on any,
-	which is consistent with the state being "waitzero" rather than
-	"waitmb".
-
-o	"ggp" is the global grace-period counter.
-
-o	"state" is the RCU state, which can be one of the following:
-
-	o	"idle": there is no grace period in progress.
-
-	o	"waitack": RCU just incremented the global grace-period
-		counter, which has the effect of reversing the roles of
-		the "last" and "cur" counters above, and is waiting for
-		all the CPUs to acknowledge the flip.  Once the flip has
-		been acknowledged, CPUs will no longer be incrementing
-		what are now the "last" counters, so that their sum will
-		decrease monotonically down to zero.
-
-	o	"waitzero": RCU is waiting for the sum of the "last" counters
-		to decrease to zero.
-
-	o	"waitmb": RCU is waiting for each CPU to execute a memory
-		barrier, which ensures that instructions from a given CPU's
-		last RCU read-side critical section cannot be reordered
-		with instructions following the memory-barrier instruction.
-
-The output of "cat rcu/rcugp" looks as follows:
-
-oldggp=48870  newggp=48873
-
-Note that reading from this file provokes a synchronize_rcu().  The
-"oldggp" value is that of "ggp" from rcu/rcuctrs above, taken before
-executing the synchronize_rcu(), and the "newggp" value is also the
-"ggp" value, but taken after the synchronize_rcu() command returns.
-
-
-The output of "cat rcu/rcugp" looks as follows:
-
-na=1337955 nl=40 wa=1337915 wl=44 da=1337871 dl=0 dr=1337871 di=1337871
-1=50989 e1=6138 i1=49722 ie1=82 g1=49640 a1=315203 ae1=265563 a2=49640
-z1=1401244 ze1=1351605 z2=49639 m1=5661253 me1=5611614 m2=49639
-
-These are counters tracking internal preemptable-RCU events, however,
-some of them may be useful for debugging algorithms using RCU.  In
-particular, the "nl", "wl", and "dl" values track the number of RCU
-callbacks in various states.  The fields are as follows:
-
-o	"na" is the total number of RCU callbacks that have been enqueued
-	since boot.
-
-o	"nl" is the number of RCU callbacks waiting for the previous
-	grace period to end so that they can start waiting on the next
-	grace period.
-
-o	"wa" is the total number of RCU callbacks that have started waiting
-	for a grace period since boot.  "na" should be roughly equal to
-	"nl" plus "wa".
-
-o	"wl" is the number of RCU callbacks currently waiting for their
-	grace period to end.
-
-o	"da" is the total number of RCU callbacks whose grace periods
-	have completed since boot.  "wa" should be roughly equal to
-	"wl" plus "da".
-
-o	"dr" is the total number of RCU callbacks that have been removed
-	from the list of callbacks ready to invoke.  "dr" should be roughly
-	equal to "da".
-
-o	"di" is the total number of RCU callbacks that have been invoked
-	since boot.  "di" should be roughly equal to "da", though some
-	early versions of preemptable RCU had a bug so that only the
-	last CPU's count of invocations was displayed, rather than the
-	sum of all CPU's counts.
-
-o	"1" is the number of calls to rcu_try_flip().  This should be
-	roughly equal to the sum of "e1", "i1", "a1", "z1", and "m1"
-	described below.  In other words, the number of times that
-	the state machine is visited should be equal to the sum of the
-	number of times that each state is visited plus the number of
-	times that the state-machine lock acquisition failed.
-
-o	"e1" is the number of times that rcu_try_flip() was unable to
-	acquire the fliplock.
-
-o	"i1" is the number of calls to rcu_try_flip_idle().
-
-o	"ie1" is the number of times rcu_try_flip_idle() exited early
-	due to the calling CPU having no work for RCU.
-
-o	"g1" is the number of times that rcu_try_flip_idle() decided
-	to start a new grace period.  "i1" should be roughly equal to
-	"ie1" plus "g1".
-
-o	"a1" is the number of calls to rcu_try_flip_waitack().
-
-o	"ae1" is the number of times that rcu_try_flip_waitack() found
-	that at least one CPU had not yet acknowledge the new grace period
-	(AKA "counter flip").
-
-o	"a2" is the number of time rcu_try_flip_waitack() found that
-	all CPUs had acknowledged.  "a1" should be roughly equal to
-	"ae1" plus "a2".  (This particular output was collected on
-	a 128-CPU machine, hence the smaller-than-usual fraction of
-	calls to rcu_try_flip_waitack() finding all CPUs having already
-	acknowledged.)
-
-o	"z1" is the number of calls to rcu_try_flip_waitzero().
-
-o	"ze1" is the number of times that rcu_try_flip_waitzero() found
-	that not all of the old RCU read-side critical sections had
-	completed.
-
-o	"z2" is the number of times that rcu_try_flip_waitzero() finds
-	the sum of the counters equal to zero, in other words, that
-	all of the old RCU read-side critical sections had completed.
-	The value of "z1" should be roughly equal to "ze1" plus
-	"z2".
-
-o	"m1" is the number of calls to rcu_try_flip_waitmb().
-
-o	"me1" is the number of times that rcu_try_flip_waitmb() finds
-	that at least one CPU has not yet executed a memory barrier.
-
-o	"m2" is the number of times that rcu_try_flip_waitmb() finds that
-	all CPUs have executed a memory barrier.
+The rcutree implementation of RCU provides debugfs trace output that
+summarizes counters and state.  This information is useful for debugging
+RCU itself, and can sometimes also help to debug abuses of RCU.
+The following sections describe the debugfs files and formats.
 
 
 Hierarchical RCU debugfs Files and Formats
@@ -210,9 +35,10 @@ rcu_bh:
   6 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=859/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
   7 c=-275 g=-275 pq=1 pqc=-275 qp=0 dt=3761/1 dn=0 df=15 of=0 ri=0 ql=0 b=10
 
-The first section lists the rcu_data structures for rcu, the second for
-rcu_bh.  Each section has one line per CPU, or eight for this 8-CPU system.
-The fields are as follows:
+The first section lists the rcu_data structures for rcu_sched, the second
+for rcu_bh.  Note that CONFIG_TREE_PREEMPT_RCU kernels will have an
+additional section for rcu_preempt.  Each section has one line per CPU,
+or eight for this 8-CPU system.  The fields are as follows:
 
 o	The number at the beginning of each line is the CPU number.
 	CPUs numbers followed by an exclamation mark are offline,
@@ -223,9 +49,9 @@ o	The number at the beginning of each line is the CPU number.
 
 o	"c" is the count of grace periods that this CPU believes have
 	completed.  CPUs in dynticks idle mode may lag quite a ways
-	behind, for example, CPU 4 under "rcu" above, which has slept
-	through the past 25 RCU grace periods.	It is not unusual to
-	see CPUs lagging by thousands of grace periods.
+	behind, for example, CPU 4 under "rcu_sched" above, which has
+	slept through the past 25 RCU grace periods.  It is not unusual
+	to see CPUs lagging by thousands of grace periods.
 
 o	"g" is the count of grace periods that this CPU believes have
 	started.  Again, CPUs in dynticks idle mode may lag behind.
@@ -308,8 +134,10 @@ The output of "cat rcu/rcugp" looks as follows:
 rcu_sched: completed=33062  gpnum=33063
 rcu_bh: completed=464  gpnum=464
 
-Again, this output is for both "rcu" and "rcu_bh".  The fields are
-taken from the rcu_state structure, and are as follows:
+Again, this output is for both "rcu_sched" and "rcu_bh".  Note that
+kernels built with CONFIG_TREE_PREEMPT_RCU will have an additional
+"rcu_preempt" line.  The fields are taken from the rcu_state structure,
+and are as follows:
 
 o	"completed" is the number of grace periods that have completed.
 	It is comparable to the "c" field from rcu/rcudata in that a
@@ -324,23 +152,24 @@ o	"gpnum" is the number of grace periods that have started.  It is
 	If these two fields are equal (as they are for "rcu_bh" above),
 	then there is no grace period in progress, in other words, RCU
 	is idle.  On the other hand, if the two fields differ (as they
-	do for "rcu" above), then an RCU grace period is in progress.
+	do for "rcu_sched" above), then an RCU grace period is in progress.
 
 
 The output of "cat rcu/rcuhier" looks as follows, with very long lines:
 
-c=6902 g=6903 s=2 jfq=3 j=72c7 nfqs=13142/nfqsng=0(13142) fqlh=6
-1/1 0:127 ^0    
-3/3 0:35 ^0    0/0 36:71 ^1    0/0 72:107 ^2    0/0 108:127 ^3    
-3/3f 0:5 ^0    2/3 6:11 ^1    0/0 12:17 ^2    0/0 18:23 ^3    0/0 24:29 ^4    0/0 30:35 ^5    0/0 36:41 ^0    0/0 42:47 ^1    0/0 48:53 ^2    0/0 54:59 ^3    0/0 60:65 ^4    0/0 66:71 ^5    0/0 72:77 ^0    0/0 78:83 ^1    0/0 84:89 ^2    0/0 90:95 ^3    0/0 96:101 ^4    0/0 102:107 ^5    0/0 108:113 ^0    0/0 114:119 ^1    0/0 120:125 ^2    0/0 126:127 ^3    
+c=6902 g=6903 s=2 jfq=3 j=72c7 nfqs=13142/nfqsng=0(13142) fqlh=6 oqlen=0
+1/1 .>. 0:127 ^0    
+3/3 .>. 0:35 ^0    0/0 .>. 36:71 ^1    0/0 .>. 72:107 ^2    0/0 .>. 108:127 ^3    
+3/3f .>. 0:5 ^0    2/3 .>. 6:11 ^1    0/0 .>. 12:17 ^2    0/0 .>. 18:23 ^3    0/0 .>. 24:29 ^4    0/0 .>. 30:35 ^5    0/0 .>. 36:41 ^0    0/0 .>. 42:47 ^1    0/0 .>. 48:53 ^2    0/0 .>. 54:59 ^3    0/0 .>. 60:65 ^4    0/0 .>. 66:71 ^5    0/0 .>. 72:77 ^0    0/0 .>. 78:83 ^1    0/0 .>. 84:89 ^2    0/0 .>. 90:95 ^3    0/0 .>. 96:101 ^4    0/0 .>. 102:107 ^5    0/0 .>. 108:113 ^0    0/0 .>. 114:119 ^1    0/0 .>. 120:125 ^2    0/0 .>. 126:127 ^3    
 rcu_bh:
-c=-226 g=-226 s=1 jfq=-5701 j=72c7 nfqs=88/nfqsng=0(88) fqlh=0
-0/1 0:127 ^0    
-0/3 0:35 ^0    0/0 36:71 ^1    0/0 72:107 ^2    0/0 108:127 ^3    
-0/3f 0:5 ^0    0/3 6:11 ^1    0/0 12:17 ^2    0/0 18:23 ^3    0/0 24:29 ^4    0/0 30:35 ^5    0/0 36:41 ^0    0/0 42:47 ^1    0/0 48:53 ^2    0/0 54:59 ^3    0/0 60:65 ^4    0/0 66:71 ^5    0/0 72:77 ^0    0/0 78:83 ^1    0/0 84:89 ^2    0/0 90:95 ^3    0/0 96:101 ^4    0/0 102:107 ^5    0/0 108:113 ^0    0/0 114:119 ^1    0/0 120:125 ^2    0/0 126:127 ^3
+c=-226 g=-226 s=1 jfq=-5701 j=72c7 nfqs=88/nfqsng=0(88) fqlh=0 oqlen=0
+0/1 .>. 0:127 ^0    
+0/3 .>. 0:35 ^0    0/0 .>. 36:71 ^1    0/0 .>. 72:107 ^2    0/0 .>. 108:127 ^3    
+0/3f .>. 0:5 ^0    0/3 .>. 6:11 ^1    0/0 .>. 12:17 ^2    0/0 .>. 18:23 ^3    0/0 .>. 24:29 ^4    0/0 .>. 30:35 ^5    0/0 .>. 36:41 ^0    0/0 .>. 42:47 ^1    0/0 .>. 48:53 ^2    0/0 .>. 54:59 ^3    0/0 .>. 60:65 ^4    0/0 .>. 66:71 ^5    0/0 .>. 72:77 ^0    0/0 .>. 78:83 ^1    0/0 .>. 84:89 ^2    0/0 .>. 90:95 ^3    0/0 .>. 96:101 ^4    0/0 .>. 102:107 ^5    0/0 .>. 108:113 ^0    0/0 .>. 114:119 ^1    0/0 .>. 120:125 ^2    0/0 .>. 126:127 ^3
 
-This is once again split into "rcu" and "rcu_bh" portions.  The fields are
-as follows:
+This is once again split into "rcu_sched" and "rcu_bh" portions,
+and CONFIG_TREE_PREEMPT_RCU kernels will again have an additional
+"rcu_preempt" section.  The fields are as follows:
 
 o	"c" is exactly the same as "completed" under rcu/rcugp.
 
@@ -372,6 +201,11 @@ o	"fqlh" is the number of calls to force_quiescent_state() that
 	exited immediately (without even being counted in nfqs above)
 	due to contention on ->fqslock.
 
+o	"oqlen" is the number of callbacks on the "orphan" callback
+	list.  RCU callbacks are placed on this list by CPUs going
+	offline, and are "adopted" either by the CPU helping the outgoing
+	CPU or by the next rcu_barrier*() call, whichever comes first.
+
 o	Each element of the form "1/1 0:127 ^0" represents one struct
 	rcu_node.  Each line represents one level of the hierarchy, from
 	root to leaves.  It is best to think of the rcu_data structures
@@ -379,7 +213,7 @@ o	Each element of the form "1/1 0:127 ^0" represents one struct
 	might be either one, two, or three levels of rcu_node structures,
 	depending on the relationship between CONFIG_RCU_FANOUT and
 	CONFIG_NR_CPUS.
-	
+
 	o	The numbers separated by the "/" are the qsmask followed
 		by the qsmaskinit.  The qsmask will have one bit
 		set for each entity in the next lower level that
@@ -389,10 +223,19 @@ o	Each element of the form "1/1 0:127 ^0" represents one struct
 		The value of qsmaskinit is assigned to that of qsmask
 		at the beginning of each grace period.
 
-		For example, for "rcu", the qsmask of the first entry
-		of the lowest level is 0x14, meaning that we are still
-		waiting for CPUs 2 and 4 to check in for the current
-		grace period.
+		For example, for "rcu_sched", the qsmask of the first
+		entry of the lowest level is 0x14, meaning that we
+		are still waiting for CPUs 2 and 4 to check in for the
+		current grace period.
+
+	o	The characters separated by the ">" indicate the state
+		of the blocked-tasks lists.  A "T" preceding the ">"
+		indicates that at least one task blocked in an RCU
+		read-side critical section blocks the current grace
+		period, while a "." preceding the ">" indicates otherwise.
+		The character following the ">" indicates similarly for
+		the next grace period.  A "T" should appear in this
+		field only for rcu-preempt.
 
 	o	The numbers separated by the ":" are the range of CPUs
 		served by this struct rcu_node.  This can be helpful
@@ -431,8 +274,9 @@ rcu_bh:
   6 np=120834 qsp=9902 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921
   7 np=144888 qsp=26336 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542
 
-As always, this is once again split into "rcu" and "rcu_bh" portions.
-The fields are as follows:
+As always, this is once again split into "rcu_sched" and "rcu_bh"
+portions, with CONFIG_TREE_PREEMPT_RCU kernels having an additional
+"rcu_preempt" section.  The fields are as follows:
 
 o	"np" is the number of times that __rcu_pending() has been invoked
 	for the corresponding flavor of RCU.
Documentation/RCU/whatisRCU.txt +1 -1
index e41a7fe..d542ca2 100644
@@ -830,7 +830,7 @@ sched:	Critical sections	Grace period		Barrier
 SRCU:	Critical sections	Grace period		Barrier
 
 	srcu_read_lock		synchronize_srcu	N/A
-	srcu_read_unlock
+	srcu_read_unlock	synchronize_srcu_expedited
 
 SRCU:	Initialization/cleanup
 	init_srcu_struct
include/linux/hardirq.h +24 -0
index 6d527ee..d5b3876 100644
@@ -139,10 +139,34 @@ static inline void account_system_vtime(struct task_struct *tsk)
 #endif
 
 #if defined(CONFIG_NO_HZ)
+#if defined(CONFIG_TINY_RCU)
+extern void rcu_enter_nohz(void);
+extern void rcu_exit_nohz(void);
+
+static inline void rcu_irq_enter(void)
+{
+	rcu_exit_nohz();
+}
+
+static inline void rcu_irq_exit(void)
+{
+	rcu_enter_nohz();
+}
+
+static inline void rcu_nmi_enter(void)
+{
+}
+
+static inline void rcu_nmi_exit(void)
+{
+}
+
+#else
 extern void rcu_irq_enter(void);
 extern void rcu_irq_exit(void);
 extern void rcu_nmi_enter(void);
 extern void rcu_nmi_exit(void);
+#endif
 #else
 # define rcu_irq_enter() do { } while (0)
 # define rcu_irq_exit() do { } while (0)
include/linux/rcupdate.h +2 -8
index 3ebd0b7..24440f4 100644
@@ -52,11 +52,6 @@ struct rcu_head {
 };
 
 /* Exported common interfaces */
-#ifdef CONFIG_TREE_PREEMPT_RCU
-extern void synchronize_rcu(void);
-#else /* #ifdef CONFIG_TREE_PREEMPT_RCU */
-#define synchronize_rcu synchronize_sched
-#endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */
 extern void synchronize_rcu_bh(void);
 extern void synchronize_sched(void);
 extern void rcu_barrier(void);
@@ -67,12 +62,11 @@ extern int sched_expedited_torture_stats(char *page);
 
 /* Internal to kernel */
 extern void rcu_init(void);
-extern void rcu_scheduler_starting(void);
-extern int rcu_needs_cpu(int cpu);
-extern int rcu_scheduler_active;
 
 #if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU)
 #include <linux/rcutree.h>
+#elif defined(CONFIG_TINY_RCU)
+#include <linux/rcutiny.h>
 #else
 #error "Unknown RCU implementation specified to kernel configuration"
 #endif
include/linux/rcutiny.h new file +104 -0

104 lines not on this page · raw message

include/linux/rcutree.h +3 -4
index 9642c6b..c93eee5 100644
@@ -34,15 +34,15 @@ struct notifier_block;
 
 extern void rcu_sched_qs(int cpu);
 extern void rcu_bh_qs(int cpu);
-extern int rcu_cpu_notify(struct notifier_block *self,
-			  unsigned long action, void *hcpu);
 extern int rcu_needs_cpu(int cpu);
+extern void rcu_scheduler_starting(void);
 extern int rcu_expedited_torture_stats(char *page);
 
 #ifdef CONFIG_TREE_PREEMPT_RCU
 
 extern void __rcu_read_lock(void);
 extern void __rcu_read_unlock(void);
+extern void synchronize_rcu(void);
 extern void exit_rcu(void);
 
 #else /* #ifdef CONFIG_TREE_PREEMPT_RCU */
@@ -57,7 +57,7 @@ static inline void __rcu_read_unlock(void)
 	preempt_enable();
 }
 
-#define __synchronize_sched() synchronize_rcu()
+#define synchronize_rcu synchronize_sched
 
 static inline void exit_rcu(void)
 {
@@ -83,7 +83,6 @@ static inline void synchronize_rcu_bh_expedited(void)
 	synchronize_sched_expedited();
 }
 
-extern void __rcu_init(void);
 extern void rcu_check_callbacks(int cpu, int user);
 
 extern long rcu_batches_completed(void);
include/linux/srcu.h +1 -0
index aca0eee..4765d97 100644
@@ -48,6 +48,7 @@ void cleanup_srcu_struct(struct srcu_struct *sp);
 int srcu_read_lock(struct srcu_struct *sp) __acquires(sp);
 void srcu_read_unlock(struct srcu_struct *sp, int idx) __releases(sp);
 void synchronize_srcu(struct srcu_struct *sp);
+void synchronize_srcu_expedited(struct srcu_struct *sp);
 long srcu_batches_completed(struct srcu_struct *sp);
 
 #endif
init/Kconfig +9 -0
index 09c5c64..d367bf6 100644
@@ -334,6 +334,15 @@ config TREE_PREEMPT_RCU
 	  is also required.  It also scales down nicely to
 	  smaller systems.
 
+config TINY_RCU
+	bool "UP-only small-memory-footprint RCU"
+	depends on !SMP
+	help
+	  This option selects the RCU implementation that is
+	  designed for UP systems from which real-time response
+	  is not required.  This option greatly reduces the
+	  memory footprint of RCU.
+
 endchoice
 
 config RCU_TRACE
kernel/Makefile +1 -0
index b8d4cd8..e9a0e6e 100644
@@ -82,6 +82,7 @@ obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o
 obj-$(CONFIG_TREE_RCU) += rcutree.o
 obj-$(CONFIG_TREE_PREEMPT_RCU) += rcutree.o
 obj-$(CONFIG_TREE_RCU_TRACE) += rcutree_trace.o
+obj-$(CONFIG_TINY_RCU) += rcutiny.o
 obj-$(CONFIG_RELAY) += relay.o
 obj-$(CONFIG_SYSCTL) += utsname_sysctl.o
 obj-$(CONFIG_TASK_DELAY_ACCT) += delayacct.o
kernel/rcupdate.c +0 -122

137 lines not on this page · raw message

kernel/rcutiny.c new file +282 -0

282 lines not on this page · raw message

kernel/rcutorture.c +52 -13

125 lines not on this page · raw message

kernel/rcutree.c +309 -156

760 lines not on this page · raw message

kernel/rcutree.h +58 -11

169 lines not on this page · raw message

kernel/rcutree_plugin.h +275 -34

415 lines not on this page · raw message

kernel/rcutree_trace.c +10 -2
index 4b31c77..9d2c884 100644
@@ -155,12 +155,15 @@ static const struct file_operations rcudata_csv_fops = {
 
 static void print_one_rcu_state(struct seq_file *m, struct rcu_state *rsp)
 {
+	long gpnum;
 	int level = 0;
+	int phase;
 	struct rcu_node *rnp;
 
+	gpnum = rsp->gpnum;
 	seq_printf(m, "c=%ld g=%ld s=%d jfq=%ld j=%x "
 		      "nfqs=%lu/nfqsng=%lu(%lu) fqlh=%lu oqlen=%ld\n",
-		   rsp->completed, rsp->gpnum, rsp->signaled,
+		   rsp->completed, gpnum, rsp->signaled,
 		   (long)(rsp->jiffies_force_qs - jiffies),
 		   (int)(jiffies & 0xffff),
 		   rsp->n_force_qs, rsp->n_force_qs_ngp,
@@ -171,8 +174,13 @@ static void print_one_rcu_state(struct seq_file *m, struct rcu_state *rsp)
 			seq_puts(m, "\n");
 			level = rnp->level;
 		}
-		seq_printf(m, "%lx/%lx %d:%d ^%d    ",
+		phase = gpnum & 0x1;
+		seq_printf(m, "%lx/%lx %c%c>%c%c %d:%d ^%d    ",
 			   rnp->qsmask, rnp->qsmaskinit,
+			   "T."[list_empty(&rnp->blocked_tasks[phase])],
+			   "E."[list_empty(&rnp->blocked_tasks[phase + 2])],
+			   "T."[list_empty(&rnp->blocked_tasks[!phase])],
+			   "E."[list_empty(&rnp->blocked_tasks[!phase + 2])],
 			   rnp->grplo, rnp->grphi, rnp->grpnum);
 	}
 	seq_puts(m, "\n");
kernel/sched.c +1 -0
index 76c0e96..e69fee4 100644
@@ -10865,6 +10865,7 @@ void synchronize_sched_expedited(void)
 		spin_unlock_irqrestore(&rq->lock, flags);
 	}
 	rcu_expedited_state = RCU_EXPEDITED_STATE_IDLE;
+	synchronize_sched_expedited_count++;
 	mutex_unlock(&rcu_sched_expedited_mutex);
 	put_online_cpus();
 	if (need_full_sync)
kernel/softirq.c +1 -1
index f8749e5..21939d9 100644
@@ -302,9 +302,9 @@ void irq_exit(void)
 	if (!in_interrupt() && local_softirq_pending())
 		invoke_softirq();
 
+	rcu_irq_exit();
 #ifdef CONFIG_NO_HZ
 	/* Make sure that timer wheel updates are propagated */
-	rcu_irq_exit();
 	if (idle_cpu(smp_processor_id()) && !in_interrupt() && !need_resched())
 		tick_nohz_stop_sched_tick(0);
 #endif
kernel/srcu.c +51 -23

128 lines not on this page · raw message

lib/Kconfig.debug +1 -1
index 8911558..50e0e78 100644
@@ -749,7 +749,7 @@ config RCU_TORTURE_TEST_RUNNABLE
 config RCU_CPU_STALL_DETECTOR
 	bool "Check for stalled CPUs delaying RCU grace periods"
 	depends on TREE_RCU || TREE_PREEMPT_RCU
-	default n
+	default y
 	help
 	  This option causes RCU to printk information on which
 	  CPUs are delaying the current grace period, but only when