Skip to contentSkip to conversation

x86: Improve CONFIG_KEXEC_JUMP description

PATCH In review Andi Kleen 2 participants 5 messages Dec 6, 2009 – Dec 7, 2009

Subsystems (2)
lore
Share & tools
lore

Andi Kleen

author
#0 lore raw

PATCH 1/3 x86: Improve CONFIG_KEXEC_JUMP description

I've been puzzling what CONFIG_KEXEC_JUMP was good for.

The Kconfig help was not very helpful in explaining why one want to set this option. This patch improves
it a bit, based on the original commit log. It's still not fully clear, but then I couldn't find a concrete application anywhere.

---
 arch/x86/Kconfig |    6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)
arch/x86/Kconfig +4 -2
Index: linux-2.6.32-ak/arch/x86/Kconfig
===================================================================
@@ -1496,8 +1496,10 @@ config KEXEC_JUMP
 	depends on EXPERIMENTAL
 	depends on KEXEC && HIBERNATION
 	---help---
-	  Jump between original kernel and kexeced kernel and invoke
-	  code in physical address mode via KEXEC
+	  Allow to call code through kexec with paging turned off and then
+	  return to the normal kernel. This can be used to call BIOS
+	  code for example, and to implement kexec based hibernation.
+	  Requires uptodate kexec tools.
 
 config PHYSICAL_START
 	hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
author
#2 lore raw

PATCH 3/3 Fix unwind annotations for 64bit kernel

Quoted 2 lines

From Jan Beulich <[email protected]>

This is an older patch from Jan Beulich to fix various problems with the dwarf2 CFI unwind annotations in 64bit entry_64.S/head_64.S CFI annotations are needed for reliable backtraces with gdb, systemtap and other unwinders.

[AK: I keep forward porting it to to newer kernels for my own use, but it should be really just included. So I'm submitting it on Jan's behalf]

---
 arch/x86/kernel/entry_64.S |  193 +++++++++++++++++++++++----------------------
 arch/x86/kernel/head_64.S  |   13 +++
 2 files changed, 115 insertions(+), 91 deletions(-)
arch/x86/kernel/entry_64.S +102 -91
Index: linux-2.6.32-ak/arch/x86/kernel/entry_64.S
===================================================================
@@ -38,6 +38,7 @@
  */
 
 #include <linux/linkage.h>
+#include <linux/stringify.h>
 #include <asm/segment.h>
 #include <asm/cache.h>
 #include <asm/errno.h>
@@ -240,21 +241,21 @@ ENDPROC(native_usergs_sysret64)
 /*
  * initial frame state for interrupts (and exceptions without error code)
  */
-	.macro EMPTY_FRAME start=1 offset=0
-	.if \start
+	.macro EMPTY_FRAME offset=0
 	CFI_STARTPROC simple
 	CFI_SIGNAL_FRAME
-	CFI_DEF_CFA rsp,8+\offset
-	.else
-	CFI_DEF_CFA_OFFSET 8+\offset
-	.endif
+	CFI_DEF_CFA rsp,\offset
 	.endm
 
 /*
  * initial frame state for interrupts (and exceptions without error code)
  */
 	.macro INTR_FRAME start=1 offset=0
-	EMPTY_FRAME \start, SS+8+\offset-RIP
+	.if \start
+	EMPTY_FRAME __stringify(SS+8+\offset-RIP)
+	.else
+	CFI_DEF_CFA_OFFSET SS+8+\offset-RIP
+	.endif
 	/*CFI_REL_OFFSET ss, SS+\offset-RIP*/
 	CFI_REL_OFFSET rsp, RSP+\offset-RIP
 	/*CFI_REL_OFFSET rflags, EFLAGS+\offset-RIP*/
@@ -267,15 +268,16 @@ ENDPROC(native_usergs_sysret64)
  * with vector already pushed)
  */
 	.macro XCPT_FRAME start=1 offset=0
-	INTR_FRAME \start, RIP+\offset-ORIG_RAX
-	/*CFI_REL_OFFSET orig_rax, ORIG_RAX-ORIG_RAX*/
+	INTR_FRAME \start, __stringify(RIP+\offset-ORIG_RAX)
 	.endm
 
 /*
  * frame that enables calling into C.
  */
 	.macro PARTIAL_FRAME start=1 offset=0
-	XCPT_FRAME \start, ORIG_RAX+\offset-ARGOFFSET
+	.if \start >= 0
+	XCPT_FRAME \start, __stringify(ORIG_RAX+\offset-ARGOFFSET)
+	.endif
 	CFI_REL_OFFSET rdi, RDI+\offset-ARGOFFSET
 	CFI_REL_OFFSET rsi, RSI+\offset-ARGOFFSET
 	CFI_REL_OFFSET rdx, RDX+\offset-ARGOFFSET
@@ -291,7 +293,9 @@ ENDPROC(native_usergs_sysret64)
  * frame that enables passing a complete pt_regs to a C function.
  */
 	.macro DEFAULT_FRAME start=1 offset=0
-	PARTIAL_FRAME \start, R11+\offset-R15
+	.if \start >= -1
+	PARTIAL_FRAME \start, __stringify(R11+\offset-R15)
+	.endif
 	CFI_REL_OFFSET rbx, RBX+\offset
 	CFI_REL_OFFSET rbp, RBP+\offset
 	CFI_REL_OFFSET r12, R12+\offset
@@ -302,21 +306,23 @@ ENDPROC(native_usergs_sysret64)
 
 /* save partial stack frame */
 ENTRY(save_args)
-	XCPT_FRAME
+	XCPT_FRAME offset=__stringify(ORIG_RAX-ARGOFFSET+16)
 	cld
-	movq_cfi rdi, RDI+16-ARGOFFSET
-	movq_cfi rsi, RSI+16-ARGOFFSET
-	movq_cfi rdx, RDX+16-ARGOFFSET
-	movq_cfi rcx, RCX+16-ARGOFFSET
-	movq_cfi rax, RAX+16-ARGOFFSET
-	movq_cfi  r8,  R8+16-ARGOFFSET
-	movq_cfi  r9,  R9+16-ARGOFFSET
-	movq_cfi r10, R10+16-ARGOFFSET
-	movq_cfi r11, R11+16-ARGOFFSET
+	movq %rdi, RDI+16-ARGOFFSET(%rsp)
+	movq %rsi, RSI+16-ARGOFFSET(%rsp)
+	movq %rdx, RDX+16-ARGOFFSET(%rsp)
+	movq %rcx, RCX+16-ARGOFFSET(%rsp)
+	movq_cfi rax, __stringify(RAX+16-ARGOFFSET)
+	movq  %r8,  R8+16-ARGOFFSET(%rsp)
+	movq  %r9,  R9+16-ARGOFFSET(%rsp)
+	movq %r10, R10+16-ARGOFFSET(%rsp)
+	movq_cfi r11, __stringify(R11+16-ARGOFFSET)
 
 	leaq -ARGOFFSET+16(%rsp),%rdi	/* arg1 for handler */
 	movq_cfi rbp, 8		/* push %rbp */
 	leaq 8(%rsp), %rbp		/* mov %rsp, %ebp */
+	CFI_DEF_CFA_REGISTER rbp
+	CFI_ADJUST_CFA_OFFSET -8
 	testl $3, CS(%rdi)
 	je 1f
 	SWAPGS
@@ -328,11 +334,10 @@ ENTRY(save_args)
 	 */
 1:	incl PER_CPU_VAR(irq_count)
 	jne 2f
-	popq_cfi %rax			/* move return address... */
+	popq %rax			/* move return address... */
 	mov PER_CPU_VAR(irq_stack_ptr),%rsp
-	EMPTY_FRAME 0
-	pushq_cfi %rbp			/* backlink for unwinder */
-	pushq_cfi %rax			/* ... to the new stack */
+	pushq %rbp			/* backlink for unwinder */
+	pushq %rax			/* ... to the new stack */
 	/*
 	 * We entered an interrupt context - irqs are off:
 	 */
@@ -342,14 +347,14 @@ ENTRY(save_args)
 END(save_args)
 
 ENTRY(save_rest)
-	PARTIAL_FRAME 1 REST_SKIP+8
+	CFI_STARTPROC
 	movq 5*8+16(%rsp), %r11	/* save return address */
-	movq_cfi rbx, RBX+16
-	movq_cfi rbp, RBP+16
-	movq_cfi r12, R12+16
-	movq_cfi r13, R13+16
-	movq_cfi r14, R14+16
-	movq_cfi r15, R15+16
+	movq %rbx, RBX+16(%rsp)
+	movq %rbp, RBP+16(%rsp)
+	movq %r12, R12+16(%rsp)
+	movq %r13, R13+16(%rsp)
+	movq %r14, R14+16(%rsp)
+	movq %r15, R15+16(%rsp)
 	movq %r11, 8(%rsp)	/* return address */
 	FIXUP_TOP_OF_STACK %r11, 16
 	ret
@@ -359,23 +364,23 @@ END(save_rest)
 /* save complete stack frame */
 	.pushsection .kprobes.text, "ax"
 ENTRY(save_paranoid)
-	XCPT_FRAME 1 RDI+8
+	XCPT_FRAME offset=__stringify(ORIG_RAX-R15+8)
 	cld
-	movq_cfi rdi, RDI+8
-	movq_cfi rsi, RSI+8
-	movq_cfi rdx, RDX+8
-	movq_cfi rcx, RCX+8
-	movq_cfi rax, RAX+8
-	movq_cfi r8, R8+8
-	movq_cfi r9, R9+8
-	movq_cfi r10, R10+8
-	movq_cfi r11, R11+8
-	movq_cfi rbx, RBX+8
-	movq_cfi rbp, RBP+8
-	movq_cfi r12, R12+8
-	movq_cfi r13, R13+8
-	movq_cfi r14, R14+8
-	movq_cfi r15, R15+8
+	movq %rdi, RDI+8(%rsp)
+	movq %rsi, RSI+8(%rsp)
+	movq_cfi rdx, __stringify(RDX+8)
+	movq_cfi rcx, __stringify(RCX+8)
+	movq_cfi rax, __stringify(RAX+8)
+	movq %r8, R8+8(%rsp)
+	movq %r9, R9+8(%rsp)
+	movq %r10, R10+8(%rsp)
+	movq %r11, R11+8(%rsp)
+	movq_cfi rbx, __stringify(RBX+8)
+	movq %rbp, RBP+8(%rsp)
+	movq %r12, R12+8(%rsp)
+	movq %r13, R13+8(%rsp)
+	movq %r14, R14+8(%rsp)
+	movq %r15, R15+8(%rsp)
 	movl $1,%ebx
 	movl $MSR_GS_BASE,%ecx
 	rdmsr
@@ -685,7 +690,7 @@ ENTRY(\label)
 	subq $REST_SKIP, %rsp
 	CFI_ADJUST_CFA_OFFSET REST_SKIP
 	call save_rest
-	DEFAULT_FRAME 0 8		/* offset 8: return address */
+	DEFAULT_FRAME -2 8		/* offset 8: return address */
 	leaq 8(%rsp), \arg	/* pt_regs pointer */
 	call \func
 	jmp ptregscall_common
@@ -702,12 +707,12 @@ END(\label)
 ENTRY(ptregscall_common)
 	DEFAULT_FRAME 1 8	/* offset 8: return address */
 	RESTORE_TOP_OF_STACK %r11, 8
-	movq_cfi_restore R15+8, r15
-	movq_cfi_restore R14+8, r14
-	movq_cfi_restore R13+8, r13
-	movq_cfi_restore R12+8, r12
-	movq_cfi_restore RBP+8, rbp
-	movq_cfi_restore RBX+8, rbx
+	movq_cfi_restore __stringify(R15+8), r15
+	movq_cfi_restore __stringify(R14+8), r14
+	movq_cfi_restore __stringify(R13+8), r13
+	movq_cfi_restore __stringify(R12+8), r12
+	movq_cfi_restore __stringify(RBP+8), rbp
+	movq_cfi_restore __stringify(RBX+8), rbx
 	ret $REST_SKIP		/* pop extended registers */
 	CFI_ENDPROC
 END(ptregscall_common)
@@ -796,10 +801,12 @@ END(interrupt)
 
 /* 0(%rsp): ~(interrupt number) */
 	.macro interrupt func
-	subq $10*8, %rsp
-	CFI_ADJUST_CFA_OFFSET 10*8
+	subq $ORIG_RAX-ARGOFFSET+8, %rsp
+	CFI_ADJUST_CFA_OFFSET ORIG_RAX-ARGOFFSET+8
 	call save_args
-	PARTIAL_FRAME 0
+	PARTIAL_FRAME -1 8
+	CFI_REL_OFFSET rbp, 0
+	CFI_DEF_CFA_REGISTER rbp
 	call \func
 	.endm
 
@@ -1028,10 +1035,10 @@ ENTRY(\sym)
 	INTR_FRAME
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq_cfi $-1		/* ORIG_RAX: no syscall to restart */
-	subq $15*8,%rsp
-	CFI_ADJUST_CFA_OFFSET 15*8
+	subq $ORIG_RAX-R15, %rsp
+	CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15
 	call error_entry
-	DEFAULT_FRAME 0
+	DEFAULT_FRAME -1
 	movq %rsp,%rdi		/* pt_regs pointer */
 	xorl %esi,%esi		/* no error code */
 	call \do_sym
@@ -1046,8 +1053,10 @@ ENTRY(\sym)
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq $-1		/* ORIG_RAX: no syscall to restart */
 	CFI_ADJUST_CFA_OFFSET 8
-	subq $15*8, %rsp
+	subq $ORIG_RAX-R15, %rsp
+	CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15
 	call save_paranoid
+	DEFAULT_FRAME -1
 	TRACE_IRQS_OFF
 	movq %rsp,%rdi		/* pt_regs pointer */
 	xorl %esi,%esi		/* no error code */
@@ -1063,8 +1072,10 @@ ENTRY(\sym)
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq $-1		/* ORIG_RAX: no syscall to restart */
 	CFI_ADJUST_CFA_OFFSET 8
-	subq $15*8, %rsp
+	subq $ORIG_RAX-R15, %rsp
+	CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15
 	call save_paranoid
+	DEFAULT_FRAME -1
 	TRACE_IRQS_OFF
 	movq %rsp,%rdi		/* pt_regs pointer */
 	xorl %esi,%esi		/* no error code */
@@ -1081,10 +1092,10 @@ END(\sym)
 ENTRY(\sym)
 	XCPT_FRAME
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
-	subq $15*8,%rsp
-	CFI_ADJUST_CFA_OFFSET 15*8
+	subq $ORIG_RAX-R15, %rsp
+	CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15
 	call error_entry
-	DEFAULT_FRAME 0
+	DEFAULT_FRAME -1
 	movq %rsp,%rdi			/* pt_regs pointer */
 	movq ORIG_RAX(%rsp),%rsi	/* get error code */
 	movq $-1,ORIG_RAX(%rsp)		/* no syscall to restart */
@@ -1099,10 +1110,10 @@ END(\sym)
 ENTRY(\sym)
 	XCPT_FRAME
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
-	subq $15*8,%rsp
-	CFI_ADJUST_CFA_OFFSET 15*8
+	subq $ORIG_RAX-R15, %rsp
+	CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15
 	call save_paranoid
-	DEFAULT_FRAME 0
+	DEFAULT_FRAME -1
 	TRACE_IRQS_OFF
 	movq %rsp,%rdi			/* pt_regs pointer */
 	movq ORIG_RAX(%rsp),%rsi	/* get error code */
@@ -1400,7 +1411,7 @@ paranoidzeroentry machine_check *machine
 
 	/* ebx:	no swapgs flag */
 ENTRY(paranoid_exit)
-	INTR_FRAME
+	DEFAULT_FRAME
 	DISABLE_INTERRUPTS(CLBR_NONE)
 	TRACE_IRQS_OFF
 	testl %ebx,%ebx				/* swapgs needed? */
@@ -1450,25 +1461,24 @@ END(paranoid_exit)
  * returns in "no swapgs flag" in %ebx.
  */
 ENTRY(error_entry)
-	XCPT_FRAME
-	CFI_ADJUST_CFA_OFFSET 15*8
+	XCPT_FRAME offset=__stringify(ORIG_RAX-R15+8)
 	/* oldrax contains error code */
 	cld
-	movq_cfi rdi, RDI+8
-	movq_cfi rsi, RSI+8
-	movq_cfi rdx, RDX+8
-	movq_cfi rcx, RCX+8
-	movq_cfi rax, RAX+8
-	movq_cfi  r8,  R8+8
-	movq_cfi  r9,  R9+8
-	movq_cfi r10, R10+8
-	movq_cfi r11, R11+8
-	movq_cfi rbx, RBX+8
-	movq_cfi rbp, RBP+8
-	movq_cfi r12, R12+8
-	movq_cfi r13, R13+8
-	movq_cfi r14, R14+8
-	movq_cfi r15, R15+8
+	movq %rdi, RDI+8(%rsp)
+	movq %rsi, RSI+8(%rsp)
+	movq %rdx, RDX+8(%rsp)
+	movq %rcx, RCX+8(%rsp)
+	movq %rax, RAX+8(%rsp)
+	movq  %r8,  R8+8(%rsp)
+	movq  %r9,  R9+8(%rsp)
+	movq %r10, R10+8(%rsp)
+	movq %r11, R11+8(%rsp)
+	movq_cfi rbx, __stringify(RBX+8)
+	movq %rbp, RBP+8(%rsp)
+	movq %r12, R12+8(%rsp)
+	movq %r13, R13+8(%rsp)
+	movq %r14, R14+8(%rsp)
+	movq %r15, R15+8(%rsp)
 	xorl %ebx,%ebx
 	testl $3,CS+8(%rsp)
 	je error_kernelspace
@@ -1477,7 +1487,6 @@ error_swapgs:
 error_sti:
 	TRACE_IRQS_OFF
 	ret
-	CFI_ENDPROC
 
 /*
  * There are two places in the kernel that can potentially fault with
@@ -1487,6 +1496,7 @@ error_sti:
  * compat mode. Check for these here too.
  */
 error_kernelspace:
+	CFI_REL_OFFSET rcx, RCX+8
 	incl %ebx
 	leaq irq_return(%rip),%rcx
 	cmpq %rcx,RIP+8(%rsp)
@@ -1497,6 +1507,7 @@ error_kernelspace:
 	cmpq $gs_change,RIP+8(%rsp)
 	je error_swapgs
 	jmp error_sti
+	CFI_ENDPROC
 END(error_entry)
 
 
@@ -1525,10 +1536,10 @@ ENTRY(nmi)
 	INTR_FRAME
 	PARAVIRT_ADJUST_EXCEPTION_FRAME
 	pushq_cfi $-1
-	subq $15*8, %rsp
-	CFI_ADJUST_CFA_OFFSET 15*8
+	subq $ORIG_RAX-R15, %rsp
+	CFI_ADJUST_CFA_OFFSET ORIG_RAX-R15
 	call save_paranoid
-	DEFAULT_FRAME 0
+	DEFAULT_FRAME -1
 	/* paranoidentry do_nmi, 0; without TRACE_IRQS_OFF */
 	movq %rsp,%rdi
 	movq $-1,%rsi
arch/x86/kernel/head_64.S +13 -0
Index: linux-2.6.32-ak/arch/x86/kernel/head_64.S
===================================================================
@@ -285,6 +285,8 @@ early_idt_handlers:
 
 ENTRY(early_idt_handler)
 #ifdef CONFIG_EARLY_PRINTK
+#include <asm/calling.h>
+#include <asm/dwarf2.h>
 	cmpl $2,early_recursion_flag(%rip)
 	jz  1f
 	incl early_recursion_flag(%rip)
@@ -300,6 +302,16 @@ ENTRY(early_idt_handler)
 	testl $0x27d00,%eax
 	je 0f
 	popq %r8		# get error code
+
+	CFI_STARTPROC	simple
+	CFI_SIGNAL_FRAME
+	CFI_DEF_CFA	rsp, SS+8-RIP
+#	CFI_REL_OFFSET	ss, SS-RIP
+	CFI_REL_OFFSET	rsp, RSP-RIP
+#	CFI_REL_OFFSET	rflags, EFLAGS-RIP
+#	CFI_REL_OFFSET	cs, CS-RIP
+	CFI_REL_OFFSET	rip, RIP-RIP
+
 0:	movq 0(%rsp),%rcx	# get ip
 	movq 8(%rsp),%rdx	# get cs
 	xorl %eax,%eax
@@ -313,6 +325,7 @@ ENTRY(early_idt_handler)
 	movq 0(%rsp),%rsi	# get rip again
 	call __print_symbol
 #endif
+	CFI_ENDPROC
 #endif /* EARLY_PRINTK */
 1:	hlt
 	jmp 1b
author
#1 lore raw

PATCH 2/3 x86: Remove CONFIG_GBPAGES option

In reply to Andi Kleen

Support for GB pages mapped direct memory has been around for quite some time and has not caused any problems as far as I know.

So it's time to remove the CONFIG_GBPAGES option and always enable it by default. The option only controlled the default anyways, no code. gbpages can be still disabled at runtime.

---
 arch/x86/Kconfig   |    9 ---------
 arch/x86/mm/init.c |    6 +-----
 2 files changed, 1 insertion(+), 14 deletions(-)
arch/x86/Kconfig +0 -9
Index: linux-2.6.32-ak/arch/x86/Kconfig
===================================================================
@@ -1110,15 +1110,6 @@ config X86_PAE
 config ARCH_PHYS_ADDR_T_64BIT
 	def_bool X86_64 || X86_PAE
 
-config DIRECT_GBPAGES
-	bool "Enable 1GB pages for kernel pagetables" if EMBEDDED
-	default y
-	depends on X86_64
-	---help---
-	  Allow the kernel linear mapping to use 1GB pages on CPUs that
-	  support it. This can improve the kernel's performance a tiny bit by
-	  reducing TLB pressure. If in doubt, say "Y".
-
 # Common NUMA Features
 config NUMA
 	bool "Numa Memory Allocation and Scheduler Support"
arch/x86/mm/init.c +1 -5
Index: linux-2.6.32-ak/arch/x86/mm/init.c
===================================================================
@@ -22,11 +22,7 @@ unsigned long __meminitdata e820_table_t
 
 int after_bootmem;
 
-int direct_gbpages
-#ifdef CONFIG_DIRECT_GBPAGES
-				= 1
-#endif
-;
+int direct_gbpages = 1;
 
 static void __init find_early_table_space(unsigned long end, int use_pse,
 					  int use_gbpages)
#3 lore raw

Re: [PATCH] [3/3] Fix unwind annotations for 64bit kernel

In reply to Andi Kleen
Quoted 4 lines
Quoted 1 line
Quoted 1 line

Andi Kleen <[email protected]> 06.12.09 15:13 >>>

From Jan Beulich <[email protected]>

Quoted 8 lines

This is an older patch from Jan Beulich to fix various problems with the dwarf2 CFI unwind annotations in 64bit entry_64.S/head_64.S CFI annotations are needed for reliable backtraces with gdb, systemtap and other unwinders.

[AK: I keep forward porting it to to newer kernels for my own use, but it should be really just included. So I'm submitting it on Jan's behalf]

So do we, but the initial submission was rejected due to doing too many things at once. I didn't since find time (admittedly also because not giving it priority) to split the patch. Thanks for giving it another try!

Quoted 2 lines

Jan

author
#4 lore raw

Re: [PATCH] [3/3] Fix unwind annotations for 64bit kernel

Quoted 3 lines

So do we, but the initial submission was rejected due to doing too many things at once. I didn't since find time (admittedly also because not giving it priority) to split the patch. Thanks for giving it another try!

I'm not sure what should be split, it's all related and straight forward.

-Andi

Signature · 1 line
[email protected] -- Speaking for myself only.