mpc85xx: Add 4-bits eSDHC support for MPC8569E-MDS boards
PATCH 1/1 mpc85xx: Add 4-bits eSDHC support for MPC8569E-MDS boards
Thanks to "Errata to MPC8569E PowerQUICC III Integrated Host Processor Family Reference Manual, Rev. 0" document, which describes all eSDHC pins, we can add 4-bits eSDHC support for MPC8569E-MDS boards.
Signed-off-by Anton Vorontsov <[email protected]>
--- board/freescale/mpc8569mds/mpc8569mds.c | 14 ++++++++++++++ include/configs/MPC8569MDS.h | 4 ++++ 2 files changed, 18 insertions(+), 0 deletions(-)
board/freescale/mpc8569mds/mpc8569mds.c +14 -0
@@ -437,6 +437,11 @@ int board_mmc_init(bd_t *bd)console_assign (stdin,"eserial1" );printf ("Switched to UART1 (initial log has been printed to " "UART0).\n" ); + +clrsetbits_be32 (&gur->plppar1,PLPPAR1_UART0_BIT_MASK , +PLPPAR1_ESDHC_4BITS_VAL ); +clrsetbits_be32 (&gur->plpdir1,PLPDIR1_UART0_BIT_MASK , +PLPDIR1_ESDHC_4BITS_VAL ); bcsr6 |=BCSR6_SD_CARD_4BITS ; }else {printf ("should be disabled.\n" );
@@ -483,6 +488,15 @@ static void fdt_board_fixup_esdhc(void *blob, bd_t *bd) break; } } + +if (hwconfig_subarg_cmp ("esdhc" ,"mode" ,"4-bits" )) { + off =fdt_node_offset_by_compatible (blob,-1 ,"fsl,esdhc" ); +if (off <0 ) { +printf ("WARNING: could not find esdhc node\n" ); +return ; + } +fdt_delprop (blob, off,"sdhci,1-bit-only" ); + } }#else static inline void fdt_board_fixup_esdhc (void *blob,bd_t *bd) {}
include/configs/MPC8569MDS.h +4 -0
@@ -277,6 +277,10 @@ extern unsigned long get_clock_freq(void);#define PLPDIR1_I2C_BIT_MASK 0x0000000F#define PLPDIR1_I2C2_VAL 0x0000000F#define PLPDIR1_ESDHC_VAL 0x00000006 +#define PLPPAR1_UART0_BIT_MASK 0x00000fc0 +#define PLPPAR1_ESDHC_4BITS_VAL 0x00000a80 +#define PLPDIR1_UART0_BIT_MASK 0x00000fc0 +#define PLPDIR1_ESDHC_4BITS_VAL 0x00000a80/* * General PCI
Signature · 1 line
1.6.3.3
Kumar Gala
AppliedPATCH 1/1 mpc85xx: Add 4-bits eSDHC support for MPC8569E-MDS boards
Quoted 9 lines · Anton Vorontsov
Thanks to "Errata to MPC8569E PowerQUICC III Integrated Host Processor Family Reference Manual, Rev. 0" document, which describes all eSDHC pins, we can add 4-bits eSDHC support for MPC8569E-MDS boards.
Signed-off-by Anton Vorontsov <[email protected]>---
board/freescale/mpc8569mds/mpc8569mds.c| 14 ++++++++++++++include/configs/MPC8569MDS.h| 4 ++++2 files changed, 18 insertions(+), 0 deletions(-)
applied to 85xx
- k