Skip to contentSkip to conversation

slow_map: minor improvements to ROM BAR handling

PATCH Applied Michael S. Tsirkin 2 participants 2 messages Dec 23, 2009 KVM

lore
Share & tools
lore

Michael S. Tsirkin

author
#0 lore raw

PATCH v3 1/1 slow_map: minor improvements to ROM BAR handling

ROM BAR can be handled same as regular BAR:
load_option_roms utility will take care of
copying it to RAM as appropriate.

Signed-off-by Michael S. Tsirkin <[email protected]>

---

Changes from v2:
replace ?: with an if statement
changes from v1:
make ROM bar read only

 hw/device-assignment.c |   25 +++++++++++++------------
 1 files changed, 13 insertions(+), 12 deletions(-)
hw/device-assignment.c +13 -12
index 000fa61..9197dca 100644
@@ -233,7 +233,10 @@ static void assigned_dev_iomem_map_slow(PCIDevice *pci_dev, int region_num,
     int m;
 
     DEBUG("slow map\n");
-    m = cpu_register_io_memory(slow_bar_read, slow_bar_write, region);
+    if (region_num == PCI_ROM_SLOT)
+        m = cpu_register_io_memory(slow_bar_read, NULL, region);
+    else
+        m = cpu_register_io_memory(slow_bar_read, slow_bar_write, region);
     cpu_register_physical_memory(e_phys, e_size, m);
 
     /* MSI-X MMIO page */

@@ -486,25 +489,23 @@ static int assigned_dev_register_regions(PCIRegion *io_regions,
                 : PCI_BASE_ADDRESS_SPACE_MEMORY;
 
             if (cur_region->size & 0xFFF) {
-                fprintf(stderr, "PCI region %d at address 0x%llx "
-                        "has size 0x%x, which is not a multiple of 4K. "
-                        "You might experience some performance hit due to that.\n",
-                        i, (unsigned long long)cur_region->base_addr,
-                        cur_region->size);
+                if (i != PCI_ROM_SLOT) {
+                    fprintf(stderr, "PCI region %d at address 0x%llx "
+                            "has size 0x%x, which is not a multiple of 4K. "
+                            "You might experience some performance hit "
+                            "due to that.\n",
+                            i, (unsigned long long)cur_region->base_addr,
+                            cur_region->size);
+                }
                 slow_map = 1;
             }
 
-            if (slow_map && (i == PCI_ROM_SLOT)) {
-                fprintf(stderr, "ROM not aligned - can't continue\n");
-                return -1;
-            }
-
             /* map physical memory */
             pci_dev->v_addrs[i].e_physbase = cur_region->base_addr;
             if (i == PCI_ROM_SLOT) {
                 pci_dev->v_addrs[i].u.r_virtbase =
                     mmap(NULL,
-                         (cur_region->size + 0xFFF) & 0xFFFFF000,
+                         cur_region->size,
                          PROT_WRITE | PROT_READ, MAP_ANONYMOUS | MAP_PRIVATE,
                          0, (off_t) 0);
Signature · 1 line
1.6.6.rc1.43.gf55cc
Applied
#1 lore raw
Quoted 7 lines · Michael S. Tsirkin

ROM BAR can be handled same as regular BAR:
load_option_roms utility will take care of
copying it to RAM as appropriate.

Signed-off-by Michael S. Tsirkin <[email protected]>

---

Quoted 7 lines

Changes from v2:
replace ?: with an if statement
changes from v1:
make ROM bar read only

 hw/device-assignment.c |   25 +++++++++++++------------
 1 files changed, 13 insertions(+), 12 deletions(-)

Applied, thanks.