EeePC 1005PE rfkill fix

The EeePC 1005PE has the wireless card on PCI bus 2.

Signed-off-by Paul Brook <[email protected]>

---
Same as before, but without mail client mangling the patch.

I couldn't figure out a smart way of figuring out the correct bus, so I hardcoded the device name. lspci and acpi dumps available at
http://www.pbrook80.webspace.virginmedia.com/

My guess is that the 1005HA is configured similarly, however I don't have hardware to test. The preceding comments imply that the 1005HA does not require the pci hotplug bits. On my 1005PE the hotplug bits are definitely required (the device stops responding when the rfkill is activated), we just need to make sure we disable the right bus. PCI bus 1 contains the wired Ethernet controller.

 drivers/platform/x86/eeepc-laptop.c |   15 ++++++++++++---

 1 files changed, 12 insertions(+), 3 deletions(-)

drivers/platform/x86/eeepc-laptop.c +0 -0

index e2be6bb..6b53701 100644
@@ -161,6 +161,7 @@ struct eeepc_laptop {

                                          by this BIOS */ bool cpufv_disabled;
       bool hotplug_disabled;
+       int hotplug_bus;
       u16 event_count[128];           /* count for each event */

       struct platform_device *platform_device;

drivers/platform/x86/eeepc-laptop.c +11 -4

@@ -585,9 +586,10 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc)
        mutex_lock(&eeepc->hotplug_lock);
 
        if (eeepc->hotplug_slot) {
-               bus = pci_find_bus(0, 1);
+               bus = pci_find_bus(0, eeepc->hotplug_bus);
                if (!bus) {
-                       pr_warning("Unable to find PCI bus 1?\n");
+                       pr_warning("Unable to find PCI bus %d?\n",
+                                  eeepc->hotplug_bus);
                        goto out_unlock;
                }
 

@@ -695,7 +697,7 @@ static struct hotplug_slot_ops eeepc_hotplug_slot_ops = {
  static int eeepc_setup_pci_hotplug(struct eeepc_laptop *eeepc)
  {
        int ret = -ENOMEM;
-       struct pci_bus *bus = pci_find_bus(0, 1);
+       struct pci_bus *bus = pci_find_bus(0, eeepc->hotplug_bus);
 
        if (!bus) {
                pr_err("Unable to find wifi PCI bus\n");

@@ -1281,6 +1283,13 @@ static void eeepc_dmi_check(struct eeepc_laptop *eeepc)
                eeepc->hotplug_disabled = true;
                pr_info("wlan hotplug disabled\n");
        }
+
+       /* The eeepc 1005PE has the wireless chip on the second PCIe bus.  */
+       if (strcmp(model, "1005PE") == 0) {
+           eeepc->hotplug_bus = 2;
+       } else {
+           eeepc->hotplug_bus = 1;
+       }
  }
 
  static void cmsg_quirk(struct eeepc_laptop *eeepc, int cm, const char *name)
--

1.6.6

First did you try your patch with an updated bios ?