Skip to contentSkip to conversation

kconfig: Updates to localmodconfig

PATCH In review Steven Rostedt 2 participants 9 messages Feb 3, 2010

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

cover kconfig: Updates to localmodconfig

I'm posting the following patches for review. I've added these to go into linux-next. They can be found in the git repo shown below:

git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig.git
for-linus-2

Steven Rostedt (4):
kconfig: Create include/generated for localmodconfig
kconfig: Check for if conditions in Kconfig for localmodconfig
kconfig: Look in both /bin and /sbin for lsmod in streamline_config.pl
kconfig: Add LSMOD=file to override the lsmod for localmodconfig

----

 scripts/kconfig/Makefile             |   15 +++++++-
 scripts/kconfig/streamline_config.pl |   59 ++++++++++++++++++++++++++++++++-
 2 files changed, 70 insertions(+), 4 deletions(-)
#1 lore raw

PATCH 1/4 kconfig: Create include/generated for localmodconfig

From: Steven Rostedt <[email protected]>

If someone downloads a brand new kernel and runs localmodconfig or localyesconfig, the ending result will report:

*** Error during update of the kernel configuration.

This is because localmodconfig and localyesconfig must create the include/generated directory to place the autoconf.h file.

---
 scripts/kconfig/Makefile |    2 ++
 1 files changed, 2 insertions(+), 0 deletions(-)
scripts/kconfig/Makefile +2 -0
index 999e8a7..006c96f 100644
@@ -31,6 +31,7 @@ silentoldconfig: $(obj)/conf
 	$< -s $(Kconfig)
 
 localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
+	$(Q)mkdir -p include/generated
 	$(Q)perl $< $(srctree) $(Kconfig) > .tmp.config
 	$(Q)if [ -f .config ]; then 				\
 			cmp -s .tmp.config .config ||		\
@@ -45,6 +46,7 @@ localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
 	$(Q)rm -f .tmp.config
 
 localyesconfig: $(obj)/streamline_config.pl $(obj)/conf
+	$(Q)mkdir -p include/generated
 	$(Q)perl $< $(srctree) $(Kconfig) > .tmp.config
 	$(Q)sed -i s/=m/=y/ .tmp.config
 	$(Q)if [ -f .config ]; then 				\
Signature · 1 line
1.6.5
#2 lore raw

PATCH 2/4 kconfig: Check for if conditions in Kconfig for localmodconfig

In reply to Steven Rostedt

From: Steven Rostedt <[email protected]>

The streamline_config.pl misses the if conditions for checking dependencies. For Kconfigs with the following construct:

if MEDIA_SUPPORT

config VIDEO_DEV

[...]

If VIDEO_DEV was enabled, the script will miss the fact that MEDIA_SUPPORT is also needed.

This patch changes streamline_config.pl to include if conditions into the dependencies of configs.

---
 scripts/kconfig/streamline_config.pl |   26 ++++++++++++++++++++++++++
 1 files changed, 26 insertions(+), 0 deletions(-)
scripts/kconfig/streamline_config.pl +26 -0
index 0d80082..9e66fa8 100644
@@ -121,6 +121,8 @@ my %prompts;
 my %objects;
 my $var;
 my $cont = 0;
+my $iflevel = 0;
+my @ifdeps;
 
 # prevent recursion
 my %read_kconfigs;
@@ -146,6 +148,15 @@ sub read_kconfig {
 	    $state = "NEW";
 	    $config = $1;
 
+	    for (my $i = 0; $i < $iflevel; $i++) {
+		if ($i) {
+		    $depends{$config} .= " " . $ifdeps[$i];
+		} else {
+		    $depends{$config} = $ifdeps[$i];
+		}
+		$state = "DEP";
+	    }
+
 	# collect the depends for the config
 	} elsif ($state eq "NEW" && /^\s*depends\s+on\s+(.*)$/) {
 	    $state = "DEP";
@@ -166,6 +177,21 @@ sub read_kconfig {
 	    # note if the config has a prompt
 	    $prompt{$config} = 1;
 
+	# Check for if statements
+	} elsif (/^if\s+(.*\S)\s*$/) {
+	    my $deps = $1;
+	    # remove beginning and ending non text
+	    $deps =~ s/^[^a-zA-Z0-9_]*//;
+	    $deps =~ s/[^a-zA-Z0-9_]*$//;
+
+	    my @deps = split /[^a-zA-Z0-9_]+/, $deps;
+
+	    $ifdeps[$iflevel++] = join ':', @deps;
+
+	} elsif (/^endif/) {
+
+	    $iflevel-- if ($iflevel);
+
 	# stop on "help"
 	} elsif (/^\s*help\s*$/) {
 	    $state = "NONE";
Signature · 1 line
1.6.5
#3 lore raw

PATCH 3/4 kconfig: Look in both /bin and /sbin for lsmod in streamline_config.pl

In reply to Steven Rostedt

From: Steven Rostedt <[email protected]>

Distributions now have lsmod in /bin instead of /sbin. But to handle both cases, we look for it in /sbin /bin /usr/bin and /usr/sbin. If lsmod is not found in any of those paths, it defaults to use just lsmod and hopes that it lies in the path of the user.

---
 scripts/kconfig/streamline_config.pl |   15 ++++++++++++++-
 1 files changed, 14 insertions(+), 1 deletions(-)
scripts/kconfig/streamline_config.pl +14 -1
index 9e66fa8..d7f7db7 100644
@@ -264,7 +264,20 @@ foreach my $makefile (@makefiles) {
 my %modules;
 
 # see what modules are loaded on this system
-open(LIN,"/sbin/lsmod|") || die "Cant lsmod";
+my $lsmod;
+
+foreach $dir ( ("/sbin", "/bin", "/usr/sbin", "/usr/bin") ) {
+    if ( -x "$dir/lsmod" ) {
+	$lsmod = "$dir/lsmod";
+	last;
+    }
+}
+if (!defined($lsmod)) {
+    # try just the path
+    $lsmod = "lsmod";
+}
+
+open(LIN,"$lsmod|") || die "Can not call lsmod with $lsmod";
 while (<LIN>) {
 	next if (/^Module/);  # Skip the first line.
 	if (/^(\S+)/) {
Signature · 1 line
1.6.5
#4 lore raw

PATCH 4/4 kconfig: Add LSMOD=file to override the lsmod for localmodconfig

In reply to Steven Rostedt

From: Steven Rostedt <[email protected]>

Doing the following:

make LSMOD=file localmodconfig

Will make the streamline-config code use the given file instead of lsmod. If the file is an executable, it will execute it, otherwise it will read it as text.

make LSMOD=/my/local/path/lsmod localmodconfig

The above will execute the lsmod in /my/local/path instead of the lsmods that may be located elsewhere.

make LSMOD=embedded_board_lsmod localmodconfig

The above will read the "embedded_board_lsmod" as a text file. This is useful if you are doing a cross compile and need to run the config against modules that exist on an embedded device.

Note, if the LSMOD= file does is not a path, it will add the path to the object directory. That is, the above example will look for "embedded_board_lsmod" in the directory that the binary will be built in (the O=dir directory).

On branch config/linus

---
 scripts/kconfig/Makefile             |   13 +++++++++-
 scripts/kconfig/streamline_config.pl |   38 ++++++++++++++++++++++++---------
 2 files changed, 38 insertions(+), 13 deletions(-)
scripts/kconfig/Makefile +11 -2
index 006c96f..85b9065 100644
@@ -30,9 +30,18 @@ silentoldconfig: $(obj)/conf
 	$(Q)mkdir -p include/generated
 	$< -s $(Kconfig)
 
+# if no path is given, then use src directory to find file
+ifdef LSMOD
+LSMOD_F = $(shell if [ `basename $(LSMOD)` == $(LSMOD) ]; then \
+		echo $(objtree)/$(LSMOD);			\
+	else							\
+		echo $(LSMOD);					\
+	fi)
+endif
+
 localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
 	$(Q)mkdir -p include/generated
-	$(Q)perl $< $(srctree) $(Kconfig) > .tmp.config
+	$(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config
 	$(Q)if [ -f .config ]; then 				\
 			cmp -s .tmp.config .config ||		\
 			(mv -f .config .config.old.1;		\
@@ -47,7 +56,7 @@ localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
 
 localyesconfig: $(obj)/streamline_config.pl $(obj)/conf
 	$(Q)mkdir -p include/generated
-	$(Q)perl $< $(srctree) $(Kconfig) > .tmp.config
+	$(Q)perl $< $(srctree) $(Kconfig) $(LSMOD_F) > .tmp.config
 	$(Q)sed -i s/=m/=y/ .tmp.config
 	$(Q)if [ -f .config ]; then 				\
 			cmp -s .tmp.config .config ||		\
scripts/kconfig/streamline_config.pl +27 -11
index d7f7db7..afbd54a 100644
@@ -113,6 +113,7 @@ find_config;
 # Get the build source and top level Kconfig file (passed in)
 my $ksource = $ARGV[0];
 my $kconfig = $ARGV[1];
+my $lsmod_file = $ARGV[2];
 
 my @makefiles = `find $ksource -name Makefile`;
 my %depends;
@@ -263,21 +264,36 @@ foreach my $makefile (@makefiles) {
 
 my %modules;
 
-# see what modules are loaded on this system
-my $lsmod;
-
-foreach $dir ( ("/sbin", "/bin", "/usr/sbin", "/usr/bin") ) {
-    if ( -x "$dir/lsmod" ) {
-	$lsmod = "$dir/lsmod";
-	last;
+if (defined($lsmod_file)) {
+    if ( ! -f $lsmod_file) {
+	die "$lsmod_file not found";
+    }
+    if ( -x $lsmod_file) {
+	# the file is executable, run it
+	open(LIN, "$lsmod_file|");
+    } else {
+	# Just read the contents
+	open(LIN, "$lsmod_file");
     }
+} else {
+
+    # see what modules are loaded on this system
+    my $lsmod;
+
+    foreach $dir ( ("/sbin", "/bin", "/usr/sbin", "/usr/bin") ) {
+	if ( -x "$dir/lsmod" ) {
+	    $lsmod = "$dir/lsmod";
+	    last;
+	}
 }
-if (!defined($lsmod)) {
-    # try just the path
-    $lsmod = "lsmod";
+    if (!defined($lsmod)) {
+	# try just the path
+	$lsmod = "lsmod";
+    }
+
+    open(LIN,"$lsmod|") || die "Can not call lsmod with $lsmod";
 }
 
-open(LIN,"$lsmod|") || die "Can not call lsmod with $lsmod";
 while (<LIN>) {
 	next if (/^Module/);  # Skip the first line.
 	if (/^(\S+)/) {
Signature · 1 line
1.6.5
#5 lore raw

Re: [PATCH 4/4] kconfig: Add LSMOD=file to override the lsmod for localmodconfig

scripts/kconfig/Makefile silentoldconfig: $(obj)/conf · line 40

Quoted 8 lines · Steven Rostedt
scripts/kconfig/Makefile +8 -0
+# if no path is given, then use src directory to find file
+ifdef LSMOD
+LSMOD_F = $(shell if [ `basename $(LSMOD)` == $(LSMOD) ]; then \
+		echo $(objtree)/$(LSMOD);			\
+	else							\
+		echo $(LSMOD);					\
+	fi)
+endif

You can do this within make like:

ifdef LSMOD
LSMOD_F := $(LSMOD)
ifeq ($(findstring /,$(LSMOD)),)
LSMOD_F := $(objtree)/$(LSMOD)
endif
endif

Michal

#6 lore raw

Re: [PATCH 4/4] kconfig: Add LSMOD=file to override the lsmod for localmodconfig

Quoted 12 lines · Michal Marek

scripts/kconfig/Makefile silentoldconfig: $(obj)/conf · line 40

Quoted 8 lines · Steven Rostedt
scripts/kconfig/Makefile +8 -0
+# if no path is given, then use src directory to find file
+ifdef LSMOD
+LSMOD_F = $(shell if [ `basename $(LSMOD)` == $(LSMOD) ]; then \
+		echo $(objtree)/$(LSMOD);			\
+	else							\
+		echo $(LSMOD);					\
+	fi)
+endif

You can do this within make like:

Quoted 6 lines

ifdef LSMOD
LSMOD_F := $(LSMOD)
ifeq ($(findstring /,$(LSMOD)),)
LSMOD_F := $(objtree)/$(LSMOD)
endif
endif

You can send me a patch and I'll apply it on top.

Thanks,

-- Steve

#7 lore raw

PATCH 1/1 kconfig: simplify LSMOD= handling

---
 scripts/kconfig/Makefile |    9 ++++-----
 1 files changed, 4 insertions(+), 5 deletions(-)
scripts/kconfig/Makefile +4 -5
index 85b9065..186c466 100644
@@ -32,11 +32,10 @@ silentoldconfig: $(obj)/conf
 
 # if no path is given, then use src directory to find file
 ifdef LSMOD
-LSMOD_F = $(shell if [ `basename $(LSMOD)` == $(LSMOD) ]; then \
-		echo $(objtree)/$(LSMOD);			\
-	else							\
-		echo $(LSMOD);					\
-	fi)
+LSMOD_F := $(LSMOD)
+ifeq ($(findstring /,$(LSMOD)),)
+  LSMOD_F := $(objtree)/$(LSMOD)
+endif
 endif
 
 localmodconfig: $(obj)/streamline_config.pl $(obj)/conf
Signature · 1 line
1.6.5.3
#8 lore raw

PATCH 1/1 kconfig: simplify LSMOD= handling

This has been merged into my for-next branch:

git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-2.6-kconfig.git
for-linus-2

Michal Marek (1):
kconfig: Simplify LSMOD= handling

----

 scripts/kconfig/Makefile |    9 ++++-----
 1 files changed, 4 insertions(+), 5 deletions(-)
---------------------------
commit 3cebbb81c7e75321e25cc586d07a25a3d98278fc
Author: Michal Marek <[email protected]>
Date:   Wed Feb 3 17:20:14 2010 +0100

kconfig: Simplify LSMOD= handling

LKML-Reference: <[email protected]>

scripts/kconfig/Makefile +4 -5
index 85b9065..186c466 100644
@@ -32,11 +32,10 @@ silentoldconfig: $(obj)/conf
 
 # if no path is given, then use src directory to find file
 ifdef LSMOD
-LSMOD_F = $(shell if [ `basename $(LSMOD)` == $(LSMOD) ]; then \
-		echo $(objtree)/$(LSMOD);			\
-	else							\
-		echo $(LSMOD);					\
-	fi)
+LSMOD_F := $(LSMOD)
+ifeq ($(findstring /,$(LSMOD)),)
+  LSMOD_F := $(objtree)/$(LSMOD)
+endif
 endif
 
 localmodconfig: $(obj)/streamline_config.pl $(obj)/conf