pcnet: make subsystem vendor id match hardware
PATCH 1/1 pcnet: make subsystem vendor id match hardware
Real pcnet device (AT2450) apparently has subsystem device and vendor id set to 0, this is out of spec (which requires that vendor id is obtained from PCI SIG) but windows xp driver seems to need this in order to associate.
qemu sets pci subsystem id to qumranet/qemu since d350d97d196a632b6c7493acf07a061017fc6f7d, debian does not yet have this patch.
https://bugzilla.redhat.com/show_bug.cgi?id=521247
--- hw/pcnet.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)
hw/pcnet.c +3 -0
@@ -1997,6 +1997,9 @@ static int pci_pcnet_init(PCIDevice *pci_dev)pci_set_long (pci_conf +PCI_BASE_ADDRESS_0 +4 ,PCI_BASE_ADDRESS_SPACE_MEMORY ); +pci_set_word (pci_conf +PCI_SUBSYSTEM_VENDOR_ID ,0x0 ); +pci_set_word (pci_conf +PCI_SUBSYSTEM_ID ,0x0 ); +/* TODO: value must be 0 at RST# */ pci_conf[PCI_INTERRUPT_PIN ] =1 ;// interrupt pin 0 pci_conf[PCI_MIN_GNT ] =0x06 ;
Signature · 1 line
1.7.0.18.g0d53a5
Quoted 24 lines · Michael S. Tsirkin
Real pcnet device (AT2450) apparently has subsystem device and vendor id set to 0, this is out of spec (which requires that vendor id is obtained from PCI SIG) but windows xp driver seems to need this in order to associate.
qemu sets pci subsystem id to qumranet/qemu since
d350d97d196a632b6c7493acf07a061017fc6f7d, debian does not yet have this patch.https://bugzilla.redhat.com/show_bug.cgi?id=521247
Signed-off-by Michael S. Tsirkin <[email protected]>Cc Gerd Hoffmann <[email protected]>Cc Anthony Liguori <[email protected]>--- hw/pcnet.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)hw/pcnet.c +0
-0
hw/pcnet.c static int pci_pcnet_init(PCIDevice *pci_dev) · line 2005
Quoted 9 lines
hw/pcnet.c +3
-0@@ -1997,6 +1997,9 @@ static int pci_pcnet_init(PCIDevice *pci_dev)pci_set_long (pci_conf +PCI_BASE_ADDRESS_0 +4 ,PCI_BASE_ADDRESS_SPACE_MEMORY ); +pci_set_word (pci_conf +PCI_SUBSYSTEM_VENDOR_ID ,0x0 ); +pci_set_word (pci_conf +PCI_SUBSYSTEM_ID ,0x0 ); +/* TODO: value must be 0 at RST# */ pci_conf[PCI_INTERRUPT_PIN ] =1 ;// interrupt pin 0 pci_conf[PCI_MIN_GNT ] =0x06 ;
No concerns from my side, still works here.
Jan
Signature · 2 lines
Siemens AG, Corporate Technology, CT T DE IT 1 Corporate Competence Center Embedded Linux
Quoted 25 lines · Michael S. Tsirkin
Real pcnet device (AT2450) apparently has subsystem device and vendor id set to 0, this is out of spec (which requires that vendor id is obtained from PCI SIG) but windows xp driver seems to need this in order to associate.
qemu sets pci subsystem id to qumranet/qemu since
d350d97d196a632b6c7493acf07a061017fc6f7d, debian does not yet have this patch.https://bugzilla.redhat.com/show_bug.cgi?id=521247
Signed-off-by Michael S. Tsirkin <[email protected]>Cc Gerd Hoffmann <[email protected]>Cc Anthony Liguori <[email protected]>--- hw/pcnet.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)hw/pcnet.c +0
-0
hw/pcnet.c static int pci_pcnet_init(PCIDevice *pci_dev) · line 2005
Quoted 9 lines
hw/pcnet.c +3
-0@@ -1997,6 +1997,9 @@ static int pci_pcnet_init(PCIDevice *pci_dev)pci_set_long (pci_conf +PCI_BASE_ADDRESS_0 +4 ,PCI_BASE_ADDRESS_SPACE_MEMORY ); +pci_set_word (pci_conf +PCI_SUBSYSTEM_VENDOR_ID ,0x0 ); +pci_set_word (pci_conf +PCI_SUBSYSTEM_ID ,0x0 ); +/* TODO: value must be 0 at RST# */ pci_conf[PCI_INTERRUPT_PIN ] =1 ;// interrupt pin 0 pci_conf[PCI_MIN_GNT ] =0x06 ;
Don't you think that a comment in the code (with the same explanation which you wrote above) would be helpful in this special case?
Of course one can always call git blame, but a comment is easier to read.
Regards
Stefan
Quoted 42 lines · Stefan Weil
Quoted 25 lines · Michael S. Tsirkin
Real pcnet device (AT2450) apparently has subsystem device and vendor id set to 0, this is out of spec (which requires that vendor id is obtained from PCI SIG) but windows xp driver seems to need this in order to associate.
qemu sets pci subsystem id to qumranet/qemu since
d350d97d196a632b6c7493acf07a061017fc6f7d, debian does not yet have this patch.https://bugzilla.redhat.com/show_bug.cgi?id=521247
Signed-off-by Michael S. Tsirkin <[email protected]>Cc Gerd Hoffmann <[email protected]>Cc Anthony Liguori <[email protected]>--- hw/pcnet.c | 3 +++ 1 files changed, 3 insertions(+), 0 deletions(-)hw/pcnet.c +0
-0hw/pcnet.c static int pci_pcnet_init(PCIDevice *pci_dev) · line 2005
Quoted 9 lines
hw/pcnet.c +3
-0@@ -1997,6 +1997,9 @@ static int pci_pcnet_init(PCIDevice *pci_dev)pci_set_long (pci_conf +PCI_BASE_ADDRESS_0 +4 ,PCI_BASE_ADDRESS_SPACE_MEMORY ); +pci_set_word (pci_conf +PCI_SUBSYSTEM_VENDOR_ID ,0x0 ); +pci_set_word (pci_conf +PCI_SUBSYSTEM_ID ,0x0 ); +/* TODO: value must be 0 at RST# */ pci_conf[PCI_INTERRUPT_PIN ] =1 ;// interrupt pin 0 pci_conf[PCI_MIN_GNT ] =0x06 ;Don't you think that a comment in the code (with the same explanation which you wrote above) would be helpful in this special case?
Of course one can always call git blame, but a comment is easier to read.
Quoted 2 lines
Regards
Stefan
Yea, ok. Send a patch.
One thing that I'm still converned about is what pci.c should do with subsystem id, since setting it to redhat/qumranet by default is not really the best thing to do: it clearly is unlikely to match any real hardware, and the heuristic it uses to detect when to set subsystem id is also kind of off: the spec ties it with class not with header type.
Maybe I'll just add a TODO for now :)
Signature · 1 line
MST