rt2500usb broken since 2.6.29
Hello,
rt2500usb is broken since kernel 2.6.29. It has been discussed before but never solved:
http://rt2x00.serialmonkey.com/phpBB/viewtopic.php?f=4&t=4834
https://bugzilla.redhat.com/show_bug.cgi?id=484888
I have Asus WL-167G and it really does not work. Scanning works, association too but no packets can be sent (looks like receive works because tcpdump shows packets from other machines). DHCP fails (No DHCPOFFERS received).
The problem is caused by this patch:
rt2x00: Implement HW encryption (rt2500usb)
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=dddfb478b26e29a2b47f655ec219e743b8111015
Removing it from 2.6.29 restores the functionality.
Signature · 1 line
Ondrej Zary
A message that is not in the archive (sent off-list or not yet received): [email protected]
Hi,
Quoted 13 lines · Ondrej Zary
Hello,
rt2500usb is broken since kernel 2.6.29. It has been discussed before but never solved:
http://rt2x00.serialmonkey.com/phpBB/viewtopic.php?f=4&t=4834
https://bugzilla.redhat.com/show_bug.cgi?id=484888I have Asus WL-167G and it really does not work. Scanning works, association too but no packets can be sent (looks like receive works because tcpdump shows packets from other machines). DHCP fails (No DHCPOFFERS received).
The problem is caused by this patch:
Quoted 8 lines
rt2x00: Implement HW encryption (rt2500usb)
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=dddfb478b26e29a2b47f655ec219e743b8111015Removing it from 2.6.29 restores the functionality.
--
Ondrej Zary
you can prevent hardware encryption by supplying "nohwcrypt=1" to the driver. (modinfo rt2500usb)
Luis Correia
rt2x00 project admin
Quoted 3 lines · On Thursday 18 March 2010 22:51:18 Luis Correia wrote:
Hi,
On Thu, Mar 18, 2010 at 21:46, Ondrej Zary
Quoted 18 lines · <[email protected]>wrote:
Quoted 18 lines
Hello,
rt2500usb is broken since kernel 2.6.29. It has been discussed before but never solved:
http://rt2x00.serialmonkey.com/phpBB/viewtopic.php?f=4&t=4834
https://bugzilla.redhat.com/show_bug.cgi?id=484888I have Asus WL-167G and it really does not work. Scanning works, association
too but no packets can be sent (looks like receive works because tcpdump shows packets from other machines). DHCP fails (No DHCPOFFERS received).The problem is caused by this patch:
rt2x00: Implement HW encryption (rt2500usb)
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit
;h=dddfb478b26e29a2b47f655ec219e743b8111015
Quoted 8 lines
Quoted 4 lines
Removing it from 2.6.29 restores the functionality.
--
Ondrej Zaryyou can prevent hardware encryption by supplying "nohwcrypt=1" to the driver.
(modinfo rt2500usb)
That did not work. Maybe that was because I just unloaded the rt2500usb module and loaded it again with nohwcrypt=1 without rebooting the machine. Then I removed the HW encryption, recompiled and reloaded and it did not work either. It started to work only after reboot.
Does the HW encryption really work with any rt2500usb hardware? How can I help to fix it? Or maybe it should be disabled by default.
Quoted 3 lines
Luis Correia
rt2x00 project admin
Signature · 1 line
Ondrej Zary
Hi,
Quoted 28 lines · Ondrej Zary
Quoted 3 lines · On Thursday 18 March 2010 22:51:18 Luis Correia wrote:
Hi,
On Thu, Mar 18, 2010 at 21:46, Ondrej Zary
Quoted 23 lines · <[email protected]>wrote:
Quoted 22 lines
Hello,
rt2500usb is broken since kernel 2.6.29. It has been discussed before but never solved:
http://rt2x00.serialmonkey.com/phpBB/viewtopic.php?f=4&t=4834
https://bugzilla.redhat.com/show_bug.cgi?id=484888I have Asus WL-167G and it really does not work. Scanning works, association
too but no packets can be sent (looks like receive works because tcpdump shows packets from other machines). DHCP fails (No DHCPOFFERS received).The problem is caused by this patch:
rt2x00: Implement HW encryption (rt2500usb)
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit
;h=dddfb478b26e29a2b47f655ec219e743b8111015Removing it from 2.6.29 restores the functionality.
--
Ondrej Zary
Quoted 8 lines
Quoted 3 lines
you can prevent hardware encryption by supplying "nohwcrypt=1" to the driver.
(modinfo rt2500usb)That did not work. Maybe that was because I just unloaded the rt2500usb module and loaded it again with nohwcrypt=1 without rebooting the machine. Then I removed the HW encryption, recompiled and reloaded and it did not work either. It started to work only after reboot.
did you actually remove the usb module and unloaded the module as well?
you then need to load the module with the option, wait one sec and then plug the device back in.
Quoted 2 lines
Does the HW encryption really work with any rt2500usb hardware? How can I help to fix it? Or maybe it should be disabled by default.
I think the HW encription did work in the past, but I'm unsure of the proper timeline.
Luis Correia
rt2x00 project admin
Quoted 3 lines · Luis Correia
Hi,
On Thu, Mar 18, 2010 at 22:04, Ondrej Zary <[email protected]>
Quoted 41 lines · wrote:
Quoted 30 lines · On Thursday 18 March 2010 22:51:18 Luis Correia wrote:
Quoted 3 lines
Hi,
On Thu, Mar 18, 2010 at 21:46, Ondrej Zary
Quoted 24 lines · <[email protected]>wrote:
Quoted 23 lines
Hello,
rt2500usb is broken since kernel 2.6.29. It has been discussed before but never solved:
http://rt2x00.serialmonkey.com/phpBB/viewtopic.php?f=4&t=4834
https://bugzilla.redhat.com/show_bug.cgi?id=484888I have Asus WL-167G and it really does not work. Scanning works, association
too but no packets can be sent (looks like receive works because tcpdump shows packets from other machines). DHCP fails (No DHCPOFFERS received).The problem is caused by this patch:
rt2x00: Implement HW encryption (rt2500usb)
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=com
mit ;h=dddfb478b26e29a2b47f655ec219e743b8111015Removing it from 2.6.29 restores the functionality.
--
Ondrej ZaryQuoted 8 lines
Quoted 3 lines
you can prevent hardware encryption by supplying "nohwcrypt=1" to the driver.
(modinfo rt2500usb)That did not work. Maybe that was because I just unloaded the rt2500usb module and loaded it again with nohwcrypt=1 without rebooting the machine. Then I removed the HW encryption, recompiled and reloaded and it did not work either. It started to work only after reboot.
did you actually remove the usb module and unloaded the module as well?
Quoted 8 lines
you then need to load the module with the option, wait one sec and then plug the device back in.
Quoted 2 lines
Does the HW encryption really work with any rt2500usb hardware? How can I help to fix it? Or maybe it should be disabled by default.
I think the HW encription did work in the past, but I'm unsure of the proper timeline.
HW encryption was added in 2.6.29 and it does not work there. In 2.6.30, the driver is broken even more - it does not work even with HW encryption disabled. I'm going to bisect it.
Signature · 1 line
Ondrej Zary
Quoted 53 lines · On Friday 19 March 2010 16:01:47 Ondrej Zary wrote:
Quoted 3 lines · Luis Correia
Hi,
On Thu, Mar 18, 2010 at 22:04, Ondrej Zary <[email protected]>
Quoted 47 lines · wrote:
Quoted 30 lines · On Thursday 18 March 2010 22:51:18 Luis Correia wrote:
Quoted 3 lines
Hi,
On Thu, Mar 18, 2010 at 21:46, Ondrej Zary
Quoted 24 lines · <[email protected]>wrote:
Quoted 23 lines
Hello,
rt2500usb is broken since kernel 2.6.29. It has been discussed before but never solved:
http://rt2x00.serialmonkey.com/phpBB/viewtopic.php?f=4&t=4834
https://bugzilla.redhat.com/show_bug.cgi?id=484888I have Asus WL-167G and it really does not work. Scanning works, association
too but no packets can be sent (looks like receive works because tcpdump shows packets from other machines). DHCP fails (No DHCPOFFERS received).The problem is caused by this patch:
rt2x00: Implement HW encryption (rt2500usb)
http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=c
om mit ;h=dddfb478b26e29a2b47f655ec219e743b8111015Removing it from 2.6.29 restores the functionality.
--
Ondrej ZaryQuoted 8 lines
Quoted 3 lines
you can prevent hardware encryption by supplying "nohwcrypt=1" to the driver.
(modinfo rt2500usb)That did not work. Maybe that was because I just unloaded the rt2500usb module and loaded it again with nohwcrypt=1 without rebooting the machine. Then I removed the HW encryption, recompiled and reloaded and it did not work either. It started to work only after reboot.
did you actually remove the usb module and unloaded the module as well?
you then need to load the module with the option, wait one sec and then plug the device back in.
Quoted 2 lines
Does the HW encryption really work with any rt2500usb hardware? How can I help to fix it? Or maybe it should be disabled by default.
Quoted 6 lines
Quoted 2 lines
I think the HW encription did work in the past, but I'm unsure of the proper timeline.
HW encryption was added in 2.6.29 and it does not work there. In 2.6.30, the driver is broken even more - it does not work even with HW encryption disabled. I'm going to bisect it.
Bisection revealed this commit:ac7f9cfa2c3b810e0adfb889ad407a8c79a84dbe
cfg80211: accept no-op interface mode changes
Removing it from 2.6.30 (and disabling HW encryption) makes rt2500usb work in 2.6.30. There are more changes to that code in next kernels so the patch cannot be removed from newer kernels. However, disabling it (by changing "if (change)" to "if (1)" in net/wireless/nl80211.c) and disabling HW encryption makes rt2500usb work even in 2.6.34-rc1.
There seems to be another (third!) problem. With 2.6.29, DHCP works on the first DHCPDISCOVER. With 2.6.30, it takes two to three DHCPDISCOVERs to get a reply. With 2.6.34-rc1, it takes three to five. After one reboot with 2.6.34-rc1, it did not work at all with this in log:
phy0 -> rt2500usb_set_device_state: Error - Device failed to enter state 3 (-16).
Signature · 1 line
Ondrej Zary