Revert "V4L/DVB (11906): saa7134: Use v4l bounding/alignment function"

This reverts commit bc52d6eb44de8f19934768d4d10d19fdbdc99950.

On newer kernels, a saa7134 board stopped to display TV video output properly. After a bisect, I found it as the commit causing the issue. Turns out that v4l_bound_align_image isn't doing the same bounding calculation as manually done previously in saa7134_try_fmt_vid_cap.

What isn't equal is the calculation done in clamp align, while previously it did "f->fmt.pix.width &= ~0x03", clamp_align function does "Round to nearest aligned value" as stated in the comment, which yields a different result. If I comment the round calculation in clamp_align like this: "x = (x /*+ (1 << (align - 1))*/) & mask", I get it fixed too, because this way the calculation is the same then.

---
 drivers/media/video/saa7134/saa7134-video.c |   11 +++++++++--
 1 files changed, 9 insertions(+), 2 deletions(-)

Probaly this should be sent to stable as well (>= 2.6.31)

index ba87128..e305c16 100644
@@ -1640,8 +1640,15 @@ static int saa7134_try_fmt_vid_cap(struct file *file, void *priv,
 	}
 
 	f->fmt.pix.field = field;
-	v4l_bound_align_image(&f->fmt.pix.width, 48, maxw, 2,
-			      &f->fmt.pix.height, 32, maxh, 0, 0);
+	if (f->fmt.pix.width  < 48)
+		f->fmt.pix.width  = 48;
+	if (f->fmt.pix.height < 32)
+		f->fmt.pix.height = 32;
+	if (f->fmt.pix.width > maxw)
+		f->fmt.pix.width = maxw;
+	if (f->fmt.pix.height > maxh)
+		f->fmt.pix.height = maxh;
+	f->fmt.pix.width &= ~0x03;
 	f->fmt.pix.bytesperline =
 		(f->fmt.pix.width * fmt->depth) >> 3;
 	f->fmt.pix.sizeimage =

1.6.6