n900 doesn't boot with mainline

Hi Tony,

I'm using 2.6.34-rc2 and I get:

[    4.874694] Unhandled fault: alignment exception (0x801) at 0xfa070009
[    4.881683] Internal error: : 801 [#1]
[    4.885681] last sysfs file: [    4.888824] Modules linked in:
[    4.892089] CPU: 0    Not tainted  (2.6.34-rc2-00011-g4f78620 #470)
[    4.898681] PC is at omap_i2c_unidle+0x44/0x138
[    4.903472] LR is at trace_hardirqs_on_caller+0x158/0x18c
[    4.909149] pc : [<c01d9258>]    lr : [<c0076eb4>]    psr: 20000013
[    4.909149] sp : cfc2bf00  ip : 00000009  fp : 00000000
[    4.921203] r10: c0394560  r9 : 00000000  r8 : c0394b88
[    4.926696] r7 : 00000000  r6 : c0394558  r5 : cfcbdc00  r4 : cfcbdc00
[    4.933532] r3 : 00000009  r2 : fa070000  r1 : 00000000  r0 : 00000000
[    4.940368] Flags: nzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
[    4.948028] Control: 10c5387f  Table: 80004019  DAC: 00000017
[    4.954071] Process swapper (pid: 1, stack limit = 0xcfc2a2e8)
[    4.960205] Stack: (0xcfc2bf00 to 0xcfc2c000)
[    4.964813] bf00: c0394ba4 c0281f10 00000000 c00ffd94 cfc8c508 00000000 c0394560 c0394560
[    4.973358] bf20: c0394560 c051c898 00000000 00000000 00000000 c0186d74 c0394560 c0185e20
[    4.981903] bf40: c0394560 c051c898 c051c898 00000000 00000000 c0185f14 c0394560 c0394594
[    4.990478] bf60: c051c898 c0185f8c 00000000 c0185f2c c051c898 c0185674 cfc16a5c cfc8dd94
[    4.999023] bf80: c051c898 cfcbc8c0 c0518280 c0184fe4 c03467a1 00000093 cfc28d40 c051c898
[    5.007598] bfa0: 00000000 c001ce54 00000000 c0186300 c00232b8 00000000 c001ce54 c002b2cc
[    5.016143] bfc0: 00000031 00000000 00000000 00000192 00000000 c00232b8 00000000 00000000
[    5.024719] bfe0: 00000000 c000860c 00000000 c0008688 00000000 c002c2a4 00000000 00202000
[    5.033294] [<c01d9258>] (omap_i2c_unidle+0x44/0x138) from [<c0281f10>] (omap_i2c_probe+0x150/0x338)
[    5.042877] [<c0281f10>] (omap_i2c_probe+0x150/0x338) from [<c0186d74>] (platform_drv_probe+0x18/0x1c)
[    5.052581] [<c0186d74>] (platform_drv_probe+0x18/0x1c) from [<c0185e20>] (really_probe+0x90/0x13c)
[    5.062042] [<c0185e20>] (really_probe+0x90/0x13c) from [<c0185f14>] (driver_probe_device+0x48/0x60)
[    5.071594] [<c0185f14>] (driver_probe_device+0x48/0x60) from [<c0185f8c>] (__driver_attach+0x60/0x84)
[    5.081329] [<c0185f8c>] (__driver_attach+0x60/0x84) from [<c0185674>] (bus_for_each_dev+0x44/0x74)
[    5.090789] [<c0185674>] (bus_for_each_dev+0x44/0x74) from [<c0184fe4>] (bus_add_driver+0x9c/0x190)
[    5.100250] [<c0184fe4>] (bus_add_driver+0x9c/0x190) from [<c0186300>] (driver_register+0xa8/0xdc)
[    5.109649] [<c0186300>] (driver_register+0xa8/0xdc) from [<c002b2cc>] (do_one_initcall+0x5c/0x1b8)
[    5.119110] [<c002b2cc>] (do_one_initcall+0x5c/0x1b8) from [<c000860c>] (do_initcalls+0x14/0x30)
[    5.128295] [<c000860c>] (do_initcalls+0x14/0x30) from [<c0008688>] (kernel_init+0x3c/0xcc)
[    5.137054] [<c0008688>] (kernel_init+0x3c/0xcc) from [<c002c2a4>] (kernel_thread_exit+0x0/0x8)
[    5.146148] Code: e5942004 e3a0c009 e1a0331c e3a01000 (e18210b3) [    5.152618] ---[ end trace 1b75b31a2719ed1c ]---
[    5.157531] Kernel panic - not syncing: Attempt�l to kill init!

do you have a patch for that already ?

balbi
--
To unsubscribe from this list: send the line "unsubscribe linux-omap" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

This one?:
https://patchwork.kernel.org/patch/87590/

- Anand

correct, thanks

balbi