v2.6.34-rc4 fixes
Subsystems (3)
Hi Linus,
Please pull from 'master' branch of
git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
or if master.kernel.org hasn't synced up yet:
master.kernel.org:/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
This will update the following files:
Documentation/watchdog/src/watchdog-simple.c | 3 Documentation/watchdog/src/watchdog-test.c | 8 +- Documentation/watchdog/watchdog-api.txt | 5 - drivers/watchdog/Kconfig | 11 +-- drivers/watchdog/hpwdt.c | 2 drivers/watchdog/iTCO_wdt.c | 99 +++++++++++++++++++++++++-- drivers/watchdog/pika_wdt.c | 2 7 files changed, 109 insertions(+), 21 deletions(-)
with these Changes:
Author: Thomas Mingarelli <[email protected]> Date: Wed Mar 17 15:33:31 2010 +0000
[WATCHDOG] hpwdt - fix lower timeout limit
[Novell Bug 581103] HP Watchdog driver has arbitrary (wrong) timeout limits. Fix the lower timeout limit to a more appropriate value.
Author: Seth Heasley <[email protected]> Date: Thu Mar 25 16:14:41 2010 -0700
[WATCHDOG] iTCO_wdt: TCO Watchdog patch for additional Intel Cougar Point DeviceIDs
This patch adds the Intel Cougar Point PCH LPC Controller DeviceIDs for iTCO Watchdog.
Author: James Hogan <[email protected]> Date: Mon Apr 5 11:31:29 2010 +0100
[WATCHDOG] doc: Fix use of WDIOC_SETOPTIONS ioctl.
In the watchdog-test program and watchdog-api.txt, pass the values to the WDIOC_SETOPTIONS ioctl as a pointer to an integer containing the values intead of directly in the third ioctl argument. The actual watchdog drivers in drivers/watchdog don't read the options directly from the argument but use get_user and copy_from_user.
Author: Giel van Schijndel <[email protected]> Date: Mon Mar 29 21:12:09 2010 +0200
[WATCHDOG] doc: watchdog simple example: don't fail on fsync()
Don't terminate the watchdog daemon when fsync() fails because no watchdog driver actually implements the fsync() syscall.
Author: Marc Zyngier <[email protected]> Date: Mon Mar 29 20:09:14 2010 +0100
[WATCHDOG] set max63xx driver as ARM only
Use of ioremap() causes build failure on S390. Restrict the driver to ARM until another architecture comes along and enables the driver for its own use.
Author: Sean MacLennan <[email protected]> Date: Mon Mar 8 19:46:41 2010 -0500
[WATCHDOG] powerpc: pika_wdt ident cannot be const
The watchdog_info struct cannot be a const since we dynamically fill in the firmware version.
The Changes can also be looked at on:
http://www.kernel.org/git/?p=linux/kernel/git/wim/linux-2.6-watchdog.git;a=summary
For completeness, I added the overal diff below.
Greetings,
Wim.
================================================================================
Documentation/watchdog/src/watchdog-simple.c +0 -3
@@ -17,9 +17,6 @@ int main(void) ret =-1 ;break ; } - ret =fsync (fd); -if (ret) -break ;sleep (10 ); }close (fd);
Documentation/watchdog/src/watchdog-test.c +6 -2
@@ -31,6 +31,8 @@ static void keep_alive(void)*/ int main (int argc,char *argv[]) { +int flags; + fd =open ("/dev/watchdog" ,O_WRONLY );if (fd ==-1 ) {
@@ -41,12 +43,14 @@ int main(int argc, char *argv[])if (argc >1 ) {if (!strncasecmp (argv[1 ],"-d" ,2 )) { -ioctl (fd,WDIOC_SETOPTIONS ,WDIOS_DISABLECARD ); + flags =WDIOS_DISABLECARD ; +ioctl (fd,WDIOC_SETOPTIONS , &flags);fprintf (stderr,"Watchdog card disabled.\n" );fflush (stderr);exit (0 ); }else if (!strncasecmp (argv[1 ],"-e" ,2 )) { -ioctl (fd,WDIOC_SETOPTIONS ,WDIOS_ENABLECARD ); + flags =WDIOS_ENABLECARD ; +ioctl (fd,WDIOC_SETOPTIONS , &flags);fprintf (stderr,"Watchdog card enabled.\n" );fflush (stderr);exit (0 );
Documentation/watchdog/watchdog-api.txt +2 -3
@@ -222,11 +222,10 @@ returned value is the temperature in degrees fahrenheit. ioctl(fd, WDIOC_GETTEMP, &temperature); Finally the SETOPTIONS ioctl can be used to control some aspects of -the cards operation; right now the pcwd driver is the only one -supporting this ioctl. +the cards operation. int options = 0; - ioctl(fd, WDIOC_SETOPTIONS, options); + ioctl(fd, WDIOC_SETOPTIONS, &options); The following options are available:
drivers/watchdog/Kconfig +6 -5
@@ -55,11 +55,6 @@ config SOFT_WATCHDOG To compile this driver as a module, choose M here: the module will be called softdog. -config MAX63XX_WATCHDOG - tristate "Max63xx watchdog" - help - Support for memory mapped max63{69,70,71,72,73,74} watchdog timer. - config WM831X_WATCHDOG tristate "WM831x watchdog" depends on MFD_WM831X
@@ -305,6 +300,12 @@ config TS72XX_WATCHDOG To compile this driver as a module, choose M here: the module will be called ts72xx_wdt. +config MAX63XX_WATCHDOG + tristate "Max63xx watchdog" + depends on ARM + help + Support for memory mapped max63{69,70,71,72,73,74} watchdog timer. + # AVR32 Architecture config AT32AP700X_WDT
drivers/watchdog/hpwdt.c +1 -1
@@ -443,7 +443,7 @@ static void hpwdt_ping(void)static int hpwdt_change_timer (int new_margin) {/* Arbitrary, can't find the card's limits */ -if (new_margin <30 || new_margin >600 ) { +if (new_margin <5 || new_margin >600 ) {printk (KERN_WARNING "hpwdt: New value passed in is invalid: %d seconds.\n" , new_margin);
drivers/watchdog/iTCO_wdt.c +93 -6
117 lines not on this page · raw message
drivers/watchdog/pika_wdt.c +1 -1
@@ -52,7 +52,7 @@ static struct {struct timer_list timer;/* The timer that pings the watchdog */ } pikawdt_private; -static const struct watchdog_info ident = { +static struct watchdog_info ident = { .identity =DRV_NAME , .options =WDIOF_CARDRESET | WDIOF_SETTIMEOUT |