Skip to contentSkip to conversation

NCR5380: bit MR_DMA_MODE set twice in NCR5380_transfer_dma()

PATCH New [email protected] 1 participant 1 message Apr 27, 2010

Subsystems (2)
SCSI Ncr 5380 SCSI drivers
lore
Share & tools
lore

[email protected]

author
#0 lore raw

PATCH 7/28 NCR5380: bit MR_DMA_MODE set twice in NCR5380_transfer_dma()

From: Roel Kluin <[email protected]>

Besides keeping the line short, the second setting of the MR_DMA_MODE bit was removed.

Signed-off-by Roel Kluin <[email protected]>
Cc James Bottomley <[email protected]>
Cc Alan Cox <[email protected]>
Signed-off-by Andrew Morton <[email protected]>

---

 drivers/scsi/NCR5380.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)
drivers/scsi/NCR5380.c renamed from drivers/scsi/NCR5380.c~ncr5380-bit-mr_dma_mode-set-twice-in-ncr5380_transfer_dma +3 -1
diff -puN drivers/scsi/NCR5380.c~ncr5380-bit-mr_dma_mode-set-twice-in-ncr5380_transfer_dma drivers/scsi/NCR5380.c
@@ -1857,7 +1857,9 @@ static int NCR5380_transfer_dma(struct S
 #endif
 	/* KLL May need eop and parity in 53c400 */
 	if (hostdata->flags & FLAG_NCR53C400)
-		NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_ENABLE_PAR_CHECK | MR_ENABLE_PAR_INTR | MR_ENABLE_EOP_INTR | MR_DMA_MODE | MR_MONITOR_BSY);
+		NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE |
+				MR_ENABLE_PAR_CHECK | MR_ENABLE_PAR_INTR |
+				MR_ENABLE_EOP_INTR | MR_MONITOR_BSY);
 	else
 		NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE);
 #endif				/* def REAL_DMA */

_