x86/cleanups for v2.6.35
Linus,
Please pull the latest x86-cleanups-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git x86-cleanups-for-linus
Thanks,
Ingo
------------------>
Jan Beulich (2):
x86-64: Don't export init_level4_pgt
x86: Clean up arch/x86/Kconfig*arch/x86/Kconfig | 49 +++++++++++-------------------------- arch/x86/Kconfig.debug | 2 - arch/x86/include/asm/boot.h | 2 +- arch/x86/kernel/x8664_ksyms_64.c | 1 - 4 files changed, 16 insertions(+), 38 deletions(-)
arch/x86/Kconfig +15 -34
@@ -197,20 +197,17 @@ config HAVE_INTEL_TXT # Use the generic interrupt handling code in kernel/irq/: config GENERIC_HARDIRQS - bool - default y + def_bool y config GENERIC_HARDIRQS_NO__DO_IRQ def_bool y config GENERIC_IRQ_PROBE - bool - default y + def_bool y config GENERIC_PENDING_IRQ - bool + def_bool y depends on GENERIC_HARDIRQS && SMP - default y config USE_GENERIC_SMP_HELPERS def_bool y
@@ -225,14 +222,12 @@ config X86_64_SMP depends on X86_64 && SMP config X86_HT - bool + def_bool y depends on SMP - default y config X86_TRAMPOLINE - bool + def_bool y depends on SMP || (64BIT && ACPI_SLEEP) - default y config X86_32_LAZY_GS def_bool y
@@ -447,7 +442,7 @@ config X86_NUMAQ firmware with - send email to <[email protected]>. config X86_SUPPORTS_MEMORY_FAILURE - bool + def_bool y # MCE code calls memory_failure(): depends on X86_MCE # On 32-bit this adds too big of NODES_SHIFT and we run out of page flags:
@@ -455,7 +450,6 @@ config X86_SUPPORTS_MEMORY_FAILURE # On 32-bit SPARSEMEM adds too big of SECTIONS_WIDTH: depends on X86_64 || !SPARSEMEM select ARCH_SUPPORTS_MEMORY_FAILURE - default y config X86_VISWS bool "SGI 320/540 (Visual Workstation)"
@@ -570,7 +564,6 @@ config PARAVIRT_SPINLOCKS config PARAVIRT_CLOCK bool - default n endif
@@ -749,7 +742,6 @@ config MAXSMP bool "Configure Maximum number of SMP Processors and NUMA Nodes" depends on X86_64 && SMP && DEBUG_KERNEL && EXPERIMENTAL select CPUMASK_OFFSTACK - default n ---help--- Configure maximum number of CPUS and NUMA Nodes for this architecture. If unsure, say N.
@@ -829,7 +821,6 @@ config X86_VISWS_APIC config X86_REROUTE_FOR_BROKEN_BOOT_IRQS bool "Reroute for broken boot IRQs" - default n depends on X86_IO_APIC ---help--- This option enables a workaround that fixes a source of
@@ -876,9 +867,8 @@ config X86_MCE_AMD the DRAM Error Threshold. config X86_ANCIENT_MCE - def_bool n + bool "Support for old Pentium 5 / WinChip machine checks" depends on X86_32 && X86_MCE - prompt "Support for old Pentium 5 / WinChip machine checks" ---help--- Include support for machine check handling on old Pentium 5 or WinChip systems. These typically need to be enabled explicitely on the command
@@ -886,8 +876,7 @@ config X86_ANCIENT_MCE config X86_MCE_THRESHOLD depends on X86_MCE_AMD || X86_MCE_INTEL - bool - default y + def_bool y config X86_MCE_INJECT depends on X86_MCE
@@ -1026,8 +1015,8 @@ config X86_CPUID choice prompt "High Memory Support" - default HIGHMEM4G if !X86_NUMAQ default HIGHMEM64G if X86_NUMAQ + default HIGHMEM4G depends on X86_32 config NOHIGHMEM
@@ -1285,7 +1274,7 @@ source "mm/Kconfig" config HIGHPTE bool "Allocate 3rd-level pagetables from highmem" - depends on X86_32 && (HIGHMEM4G || HIGHMEM64G) + depends on HIGHMEM ---help--- The VM uses one page table entry for each page of physical memory. For systems with a lot of RAM, this can be wasteful of precious
@@ -1369,8 +1358,7 @@ config MATH_EMULATION kernel, it won't hurt. config MTRR - bool - default y + def_bool y prompt "MTRR (Memory Type Range Register) support" if EMBEDDED ---help--- On Intel P6 family processors (Pentium Pro, Pentium II and later)
@@ -1436,8 +1424,7 @@ config MTRR_SANITIZER_SPARE_REG_NR_DEFAULT mtrr_spare_reg_nr=N on the kernel command line. config X86_PAT - bool - default y + def_bool y prompt "x86 PAT support" if EMBEDDED depends on MTRR ---help---
@@ -1605,8 +1592,7 @@ config X86_NEED_RELOCS depends on X86_32 && RELOCATABLE config PHYSICAL_ALIGN - hex - prompt "Alignment value to which kernel should be aligned" if X86_32 + hex "Alignment value to which kernel should be aligned" if X86_32 default "0x1000000" range 0x2000 0x1000000 ---help---
@@ -1653,7 +1639,6 @@ config COMPAT_VDSO config CMDLINE_BOOL bool "Built-in kernel command line" - default n ---help--- Allow for specifying boot arguments to the kernel at build time. On some systems (e.g. embedded ones), it is
@@ -1687,7 +1672,6 @@ config CMDLINE config CMDLINE_OVERRIDE bool "Built-in command line overrides boot loader arguments" - default n depends on CMDLINE_BOOL ---help--- Set this option to 'Y' to have the kernel ignore the boot loader
@@ -1723,8 +1707,7 @@ source "drivers/acpi/Kconfig" source "drivers/sfi/Kconfig" config X86_APM_BOOT - bool - default y + def_bool y depends on APM || APM_MODULE menuconfig APM
@@ -1953,8 +1936,7 @@ config DMAR_DEFAULT_ON experimental. config DMAR_BROKEN_GFX_WA - def_bool n - prompt "Workaround broken graphics drivers (going away soon)" + bool "Workaround broken graphics drivers (going away soon)" depends on DMAR && BROKEN ---help--- Current Graphics drivers tend to use physical address
@@ -2052,7 +2034,6 @@ config SCx200HR_TIMER config OLPC bool "One Laptop Per Child support" select GPIOLIB - default n ---help--- Add support for detecting the unique features of the OLPC XO hardware.
arch/x86/Kconfig.debug +0 -2
@@ -45,7 +45,6 @@ config EARLY_PRINTK config EARLY_PRINTK_DBGP bool "Early printk via EHCI debug port" - default n depends on EARLY_PRINTK && PCI ---help--- Write kernel log output directly into the EHCI debug port.
@@ -76,7 +75,6 @@ config DEBUG_PER_CPU_MAPS bool "Debug access to per_cpu maps" depends on DEBUG_KERNEL depends on SMP - default n ---help--- Say Y to verify that the per_cpu map being accessed has been setup. Adds a fair amount of code to kernel memory
arch/x86/include/asm/boot.h +1 -1
@@ -24,7 +24,7 @@#define MIN_KERNEL_ALIGN (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2)#if (CONFIG_PHYSICAL_ALIGN & (CONFIG_PHYSICAL_ALIGN -1 )) || \ - (CONFIG_PHYSICAL_ALIGN < (_AC (1 ,UL ) <<MIN_KERNEL_ALIGN_LG2 )) + (CONFIG_PHYSICAL_ALIGN <MIN_KERNEL_ALIGN )#error "Invalid value for CONFIG_PHYSICAL_ALIGN"#endif
arch/x86/kernel/x8664_ksyms_64.c +0 -1
@@ -54,7 +54,6 @@ EXPORT_SYMBOL(memcpy);EXPORT_SYMBOL (__memcpy);EXPORT_SYMBOL (empty_zero_page); -EXPORT_SYMBOL (init_level4_pgt);#ifndef CONFIG_PARAVIRT EXPORT_SYMBOL (native_load_gs_index);#endif