Skip to contentSkip to conversation

ARM: mach-shmobile: Use 0x2200 as INTCS_VECT_BASE

PATCH New Magnus Damm 1 participant 1 message May 19, 2010

Subsystems (4)
lore
Share & tools
lore

Magnus Damm

author maintainer
#0 lore raw

PATCH 1/1 ARM: mach-shmobile: Use 0x2200 as INTCS_VECT_BASE

From: Magnus Damm <[email protected]>

Change INTCS_VECT_BASE from 0x3400 to 0x2200.

The old value 0x3400 gave the INTCA and INTCS interrupt conrollers separated spaces, but required ARM support for more than 512 NR_IRQS which is not in place at this point.

The value 0x2200 will make some of the INTCA interrupts make use of empty INTCS areas. This is a bit more error prone but works fine as a workaround for G3, G3 and AP4.

---

 arch/arm/mach-shmobile/include/mach/irqs.h |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
arch/arm/mach-shmobile/include/mach/irqs.h +1 -1
@@ -9,7 +9,7 @@
 #define irq2evt(irq)		(((irq) + 16) << 5)
 
 /* INTCS */
-#define INTCS_VECT_BASE		0x3400
+#define INTCS_VECT_BASE		0x2200
 #define INTCS_VECT(n, vect)	INTC_VECT((n), INTCS_VECT_BASE + (vect))
 #define intcs_evt2irq(evt)	evt2irq(INTCS_VECT_BASE + (evt))