Skip to contentSkip to conversation

powerpc: Use common cpu_die (fixes SMP+SUSPEND build)

PATCH New Anton Vorontsov 1 participant 1 message May 19, 2010

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 powerpc: Use common cpu_die (fixes SMP+SUSPEND build)

From: Milton Miller <[email protected]>

Configuring a powerpc 32 bit kernel for both SMP and SUSPEND turns on CPU_HOTPLUG to enable disable_nonboot_cpus to be called by the common suspend code. Previously the definition of cpu_die for ppc32 was in the powermac platform code, causing it to be undefined if that platform as not selected.

arch/powerpc/kernel/built-in.o: In function 'cpu_idle':
arch/powerpc/kernel/idle.c:98: undefined reference to 'cpu_die'

Move the code from setup_64 to smp.c and rename the power mac versions to their specific names.

Note that this does not setup the cpu_die pointers in either smp_ops (request a given cpu die) or ppc_md (make this cpu die), for other platforms but there are generic versions in smp.c.

---
 arch/powerpc/kernel/setup_64.c          |    6 ------
 arch/powerpc/kernel/smp.c               |    6 ++++++
 arch/powerpc/platforms/powermac/pmac.h  |    2 ++
 arch/powerpc/platforms/powermac/setup.c |   11 ++++++++---
 arch/powerpc/platforms/powermac/smp.c   |    5 +++--
 5 files changed, 19 insertions(+), 11 deletions(-)
arch/powerpc/kernel/setup_64.c +0 -6
index 9143891..cea6698 100644
@@ -573,12 +573,6 @@ void ppc64_boot_msg(unsigned int src, const char *msg)
 	printk("[boot]%04x %s\n", src, msg);
 }
 
-void cpu_die(void)
-{
-	if (ppc_md.cpu_die)
-		ppc_md.cpu_die();
-}
-
 #ifdef CONFIG_SMP
 #define PCPU_DYN_SIZE		()
 
arch/powerpc/kernel/smp.c +6 -0
index c2ee144..a3b8d61 100644
@@ -631,4 +631,10 @@ void cpu_hotplug_driver_unlock()
 {
 	mutex_unlock(&powerpc_cpu_hotplug_driver_mutex);
 }
+
+void cpu_die(void)
+{
+	if (ppc_md.cpu_die)
+		ppc_md.cpu_die();
+}
 #endif
arch/powerpc/platforms/powermac/pmac.h +2 -0
index 3362e78..f0bc08f 100644
@@ -33,6 +33,8 @@ extern void pmac_setup_pci_dma(void);
 extern void pmac_check_ht_link(void);
 
 extern void pmac_setup_smp(void);
+extern void pmac32_cpu_die(void);
+extern void low_cpu_die(void) __attribute__((noreturn));
 
 extern int pmac_nvram_init(void);
 extern void pmac_pic_init(void);
arch/powerpc/platforms/powermac/setup.c +8 -3
index 15c2241..8b42476 100644
@@ -646,7 +646,7 @@ static int pmac_pci_probe_mode(struct pci_bus *bus)
 /* access per cpu vars from generic smp.c */
 DECLARE_PER_CPU(int, cpu_state);
 
-static void pmac_cpu_die(void)
+static void pmac64_cpu_die(void)
 {
 	/*
 	 * turn off as much as possible, we'll be
@@ -717,8 +717,13 @@ define_machine(powermac) {
 	.pcibios_after_init	= pmac_pcibios_after_init,
 	.phys_mem_access_prot	= pci_phys_mem_access_prot,
 #endif
-#if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC64)
-	.cpu_die		= pmac_cpu_die,
+#ifdef CONFIG_HOTPLUG_CPU
+#ifdef CONFIG_PPC64
+	.cpu_die		= pmac64_cpu_die,
+#endif
+#ifdef CONFIG_PPC32
+	.cpu_die		= pmac32_cpu_die,
+#endif
 #endif
 #if defined(CONFIG_HOTPLUG_CPU) && defined(CONFIG_PPC32)
 	.cpu_die		= generic_mach_cpu_die,
arch/powerpc/platforms/powermac/smp.c +3 -2
index 6898e82..64f3a46 100644
@@ -53,6 +53,8 @@
 #include <asm/pmac_low_i2c.h>
 #include <asm/pmac_pfunc.h>
 
+#include "pmac.h"
+
 #undef DEBUG
 
 #ifdef DEBUG
@@ -878,10 +880,9 @@ int smp_core99_cpu_disable(void)
 	return 0;
 }
 
-extern void low_cpu_die(void) __attribute__((noreturn)); /* in sleep.S */
 static int cpu_dead[NR_CPUS];
 
-void cpu_die(void)
+void pmac32_cpu_die(void)
 {
 	local_irq_disable();
 	cpu_dead[smp_processor_id()] = 1;
Signature · 1 line
1.7.0.5