Release usb devices on shutdown and usb_del command

When closig Vm or removing usb on guest via usb_del monitor command, qemu does not return the control to the host, the user have to unplug and plug the device in order to use it on the host.

v2:
added empty methods to usb-bsd and usb-stub.
release usb devices when main is out.

Signed-off-by Shahar Havivi <[email protected]>

---
 hw/usb-bus.c |    4 ++++
 hw/usb.h     |    2 ++
 usb-bsd.c    |   10 ++++++++++
 usb-linux.c  |   21 +++++++++++++++++++++
 usb-stub.c   |   10 ++++++++++
 vl.c         |    1 +
 6 files changed, 48 insertions(+), 0 deletions(-)

hw/usb-bus.c +0 -0

index b692503..75dc819 100644

hw/usb-bus.c +0 -0

     qdev_free(&dev->qdev);
     return 0;
 }

hw/usb.h +2 -0

index 00d2802..08c48d2 100644
@@ -258,6 +258,8 @@ void usb_send_msg(USBDevice *dev, int msg);
 USBDevice *usb_host_device_open(const char *devname);
 int usb_host_device_close(const char *devname);
 void usb_host_info(Monitor *mon);
+int usb_host_device_release(USBDevice *dev);
+void usb_cleanup(void);
 
 /* usb-hid.c */
 void usb_hid_datain_cb(USBDevice *dev, void *opaque, void (*datain)(void *));

usb-bsd.c +10 -0

index 48567a3..fc9ea80 100644
@@ -634,3 +634,13 @@ int usb_host_device_close(const char *devname)
 {
     return 0;
 }
+
+int usb_host_device_release(USBDevice *dev)
+{
+    return 0;
+}
+
+void usb_cleanup(void)
+{
+    return 0;
+}

usb-linux.c +21 -0

index 88273ff..cea5b84 100644
@@ -286,6 +286,27 @@ static void async_cancel(USBPacket *unused, void *opaque)
     }
 }
 
+void usb_cleanup(void)
+{
+    struct USBHostDevice *s;
+
+    QTAILQ_FOREACH(s, &hostdevs, next) {
+        if (s->fd != -1) {
+            usb_host_device_release((USBDevice*)s);
+        }
+    }
+}
+
+int usb_host_device_release(USBDevice *dev)
+{
+    int ret;
+
+    USBHostDevice *s = DO_UPCAST(USBHostDevice, dev, dev);
+    ret = ioctl(s->fd, USBDEVFS_RESET);
+
+    return ret;
+}
+
 static int usb_host_claim_interfaces(USBHostDevice *dev, int configuration)
 {
     int dev_descr_len, config_descr_len;

usb-stub.c +10 -0

index 9c3fcea..4432c2e 100644
@@ -50,3 +50,13 @@ int usb_host_device_close(const char *devname)
 {
     return 0;
 }
+
+int usb_host_device_release(USBDevice *dev)
+{
+    return 0;
+}
+
+void usb_cleanup(void)
+{
+    return 0;
+}

vl.c +1 -0

index d77b47c..e3f4dc9 100644
@@ -3914,6 +3914,7 @@ int main(int argc, char **argv, char **envp)
     main_loop();
     quit_timers();
     net_cleanup();
+    usb_cleanup();
 
     return 0;
 }

Quoted 23 lines · Shahar Havivi

When closig Vm or removing usb on guest via usb_del monitor command, qemu does not return the control to the host, the user have to unplug and plug the device in order to use it on the host.

v2:
added empty methods to usb-bsd and usb-stub.
release usb devices when main is out.

Signed-off-by Shahar Havivi <[email protected]>

---
 hw/usb-bus.c |    4 ++++
 hw/usb.h     |    2 ++
 usb-bsd.c    |   10 ++++++++++
 usb-linux.c  |   21 +++++++++++++++++++++
 usb-stub.c   |   10 ++++++++++
 vl.c         |    1 +
 6 files changed, 48 insertions(+), 0 deletions(-)

hw/usb-bus.c +0 -0

index b692503..75dc819 100644

hw/usb-bus.c int usb_device_delete_addr(int busnr, int addr) · line 213

Quoted 7 lines

hw/usb-bus.c +4 -0

@@ -207,6 +207,10 @@ int usb_device_delete_addr(int busnr, int addr)
         return -1;
     dev = port->dev;
 
+    if (!strcmp(dev->info->usbdevice_name, "host")) {
+        usb_host_device_release(dev);
+    }
+

Shouldn't this be done through a callback -- say usbdevice_release similar to usbdevice_init -- instead of embedding host specifics here? You wouldn't need the bsd and stub stubs then.

David

Quoted 3 lines

hw/usb-bus.c +0 -0

     qdev_free(&dev->qdev);
     return 0;
 }

Quoted 32 lines

usb-linux.c +21 -0

index 88273ff..cea5b84 100644
@@ -286,6 +286,27 @@ static void async_cancel(USBPacket *unused, void *opaque)
     }
 }
 
+void usb_cleanup(void)
+{
+    struct USBHostDevice *s;
+
+    QTAILQ_FOREACH(s, &hostdevs, next) {
+        if (s->fd != -1) {
+            usb_host_device_release((USBDevice*)s);
+        }
+    }
+}
+
+int usb_host_device_release(USBDevice *dev)
+{
+    int ret;
+
+    USBHostDevice *s = DO_UPCAST(USBHostDevice, dev, dev);
+    ret = ioctl(s->fd, USBDEVFS_RESET);
+
+    return ret;
+}
+
 static int usb_host_claim_interfaces(USBHostDevice *dev, int configuration)
 {
     int dev_descr_len, config_descr_len;

Quoted 10 lines

vl.c +1 -0

index d77b47c..e3f4dc9 100644
@@ -3914,6 +3914,7 @@ int main(int argc, char **argv, char **envp)
     main_loop();
     quit_timers();
     net_cleanup();
+    usb_cleanup();
 

vl.c int main(int argc, char **argv, char **envp) · line 3920

Quoted 2 lines

vl.c +0 -0

     return 0;
 }

What about the existing callbacks? Could handle_destroy do?

Quoted 8 lines

Quoted 8 lines

vl.c +1 -0

@@ -3914,6 +3914,7 @@ int main(int argc, char **argv, char **envp)
      main_loop();
      quit_timers();
      net_cleanup();
+    usb_cleanup();
 

Quoted 2 lines

vl.c int main(int argc, char **argv, char **envp) · line 3920

Quoted 2 lines

vl.c +0 -0

      return 0;
  }

Figure we'd have to clean up the qdev tree on exit. Gerd?

Remove usb_host_device_release and using usb_host_close to handle usb_del command. Gerd, What do you think about the usb_cleanup()?

Date: Tue, 25 May 2010 10:58:50 +0200
From: Gerd Hoffmann <[email protected]>
To: Shahar Havivi <[email protected]>
CC: "David S. Ahern" <[email protected]>,
Markus Armbruster <[email protected]>, [email protected]
Subject: Re: [PATCH] Release usb devices on shutdown and usb_del command

Quoted 2 lines · Shahar Havivi

Remove usb_host_device_release and using usb_host_close to handle usb_del command. Gerd, What do you think about the usb_cleanup()?

We need a mechanism to handle this for sure. I don't like that usb-specific approach very much though.

I think we should either do that at qdev level, then at exit walk the whole device tree and call cleanup functions (if present). So every device has the chance to do cleanups when needed.

Or we could have a exit notifier, which can be used for device (and also other) cleanup work.

I tend to think that a exit notifier will be better. We probably have only a few devices which actually have to do some cleanup work (usb passthrough, maybe pci passthrough too), so building qdev infrastructure for that feels a bit like overkill. And exit notifiers are more generic, i.e. it will also work for non-device stuff.

cheers,
Gerd

Note: usbdevice_init() is not for general initialization, just for dealing with the legacy -usbdevice command line.

Quoted 3 lines · Markus Armbruster

Note: usbdevice_init() is not for general initialization, just for dealing with the legacy -usbdevice command line.

Perhaps the comment before usbdevice_create is misleading or has some conversion not completed? Right now even devices entered through the monitor go through usbdevice_create -- which is the only place the usbdevice_init() hook is invoked.