be2iscsi: Adding crashdump support
Subsystems (2)
PATCH 11/20 be2iscsi: Adding crashdump support
These changes allow the driver to support crashdump. We need to reset the
chip incase of a crashdump
Signed-off-by Jayamohan Kallickal <[email protected]>
--- drivers/scsi/be2iscsi/be_cmds.c | 80 +++++++++++++++++++++++++++++++++++++++ drivers/scsi/be2iscsi/be_cmds.h | 3 + drivers/scsi/be2iscsi/be_main.c | 50 ++++++++++++++++++++++++ drivers/scsi/be2iscsi/be_main.h | 9 ++++- 4 files changed, 141 insertions(+), 1 deletions(-)
drivers/scsi/be2iscsi/be_cmds.c +80 -0
@@ -19,6 +19,86 @@#include "be_mgmt.h" #include "be_main.h" +int beiscsi_pci_soft_reset (struct beiscsi_hba *phba) +{ +u32 sreset; +u8 *pci_reset_offset =0 ; +u8 *pci_online0_offset =0 ; +u8 *pci_online1_offset =0 ; +u32 pconline0 =0 ; +u32 pconline1 =0 ; +u32 i; + + pci_reset_offset = (u8 *)phba->pci_va +BE2_SOFT_RESET ; + pci_online0_offset = (u8 *)phba->pci_va +BE2_PCI_ONLINE0 ; + pci_online1_offset = (u8 *)phba->pci_va +BE2_PCI_ONLINE1 ; + sreset =readl ((void *)pci_reset_offset); + sreset |=BE2_SET_RESET ; +writel (sreset, (void *)pci_reset_offset); + + i =0 ; +while (sreset &BE2_SET_RESET ) { +if (i >64 ) +break ; +msleep (100 ); + sreset =readl ((void *)pci_reset_offset); + i++; + } + +if (sreset &BE2_SET_RESET ) { +printk (KERN_ERR "Soft Reset did not deassert\n" ); +return -EIO ; + } + pconline1 =BE2_MPU_IRAM_ONLINE ; +writel (pconline0, (void *)pci_online0_offset); +writel (pconline1, (void *)pci_online1_offset); + + sreset =BE2_SET_RESET ; +writel (sreset, (void *)pci_reset_offset); + + i =0 ; +while (sreset &BE2_SET_RESET ) { +if (i >64 ) +break ; +msleep (1 ); + sreset =readl ((void *)pci_reset_offset); + i++; + } +if (sreset &BE2_SET_RESET ) { +printk (KERN_ERR "MPU Online Soft Reset did not deassert\n" ); +return -EIO ; + } +return 0 ; +} + +int be_chk_reset_complete (struct beiscsi_hba *phba) +{ +unsigned int num_loop; +u8 *mpu_sem =0 ; +u32 status; + + num_loop =1000 ; + mpu_sem = (u8 *)phba->csr_va +MPU_EP_SEMAPHORE ; +msleep (5000 ); + +while (num_loop) { + status =readl ((void *)mpu_sem); + +if ((status &0x80000000 ) || (status &0x0000FFFF ) ==0xC000 ) +break ; +msleep (60 ); + num_loop--; + } + +if ((status &0x80000000 ) || (!num_loop)) { +printk (KERN_ERR "Failed in be_chk_reset_complete" +"status = 0x%x\n" , status); +return -EIO ; + } + +return 0 ; +} +void be_mcc_notify (struct beiscsi_hba *phba) {struct be_queue_info *mccq = &phba->ctrl.mcc_obj.q;
drivers/scsi/be2iscsi/be_cmds.h +3 -0
@@ -901,6 +901,9 @@ struct be_fw_cfg {* the cxn */ +int beiscsi_pci_soft_reset (struct beiscsi_hba *phba); +int be_chk_reset_complete (struct beiscsi_hba *phba); +void be_wrb_hdr_prepare (struct be_mcc_wrb *wrb,int payload_len,bool embedded,u8 sge_cnt);
drivers/scsi/be2iscsi/be_main.c +50 -0
86 lines not on this page · raw message
drivers/scsi/be2iscsi/be_main.h +8 -1
@@ -69,7 +69,14 @@#define BEISCSI_NUM_DEVICES_SUPPORTED 0x01#define BEISCSI_MAX_FRAGS_INIT 192#define BE_NUM_MSIX_ENTRIES 1 -#define MPU_EP_SEMAPHORE 0xac + +#define MPU_EP_CONTROL 0 +#define MPU_EP_SEMAPHORE 0xac +#define BE2_SOFT_RESET 0x5c +#define BE2_PCI_ONLINE0 0xb0 +#define BE2_PCI_ONLINE1 0xb4 +#define BE2_SET_RESET 0x80 +#define BE2_MPU_IRAM_ONLINE 0x00000080#define BE_SENSE_INFO_SIZE 258#define BE_ISCSI_PDU_HEADER_SIZE 64
Signature · 1 line
1.6.5.2