Regression 2.6.34+ -> 2.6.34-rc5: radeon KMS rs780 problems
Hi,
My 790gx chipset supplies an rs780. With .34+ all is ok. With .35-rc5 basic function seems ok (kde works) but games like extreme tux racer have problems. The cursor does not display when on the tux racer window and various objects flicker on and off as I attempt to play the game.
Here is what .34+ detects (think this kernel has a drm-radeon-testing from may or early june)
[ 1.370735] [drm] Initialized drm 1.1.0 20060810 [ 1.376014] [drm] radeon defaulting to kernel modesetting. [ 1.382041] [drm] radeon kernel modesetting enabled. [ 1.387560] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.395205] radeon 0000:01:05.0: setting latency timer to 64 [ 1.397347] [drm] initializing kernel modesetting (RS780 0x1002:0x9614). [ 1.404961] [drm] register mmio base: 0xFE9F0000 [ 1.410036] [drm] register mmio size: 65536 [ 1.415328] ATOM BIOS: B27722 [ 1.418612] [drm] Clocks initialized ! [ 1.422740] [drm] 3 Power State(s) [ 1.426486] [drm] State 0 Default (default) [ 1.431081] [drm] 1 Clock Mode(s) [ 1.434831] [drm] 0 engine: 300000 [ 1.438773] [drm] State 1 Performance [ 1.442897] [drm] 1 Clock Mode(s) [ 1.446648] [drm] 0 engine: 500000 [ 1.450589] [drm] State 2 Default [ 1.454344] [drm] 1 Clock Mode(s) [ 1.458093] [drm] 0 engine: 500000 [ 1.462038] [drm] radeon: power management initialized [ 1.467705] radeon 0000:01:05.0: VRAM: 256M 0xC0000000 - 0xCFFFFFFF (256M used) [ 1.475724] radeon 0000:01:05.0: GTT: 512M 0xA0000000 - 0xBFFFFFFF [ 1.485117] [drm] Detected VRAM RAM=256M, BAR=256M [ 1.490391] [drm] RAM width 32bits DDR [ 1.494785] [TTM] Zone kernel: Available graphics memory: 3956838 kiB. [ 1.502042] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 1.509465] [drm] radeon: 256M of VRAM memory ready [ 1.514825] [drm] radeon: 512M of GTT memory ready. [ 1.520236] [drm] radeon: irq initialized. [ 1.524739] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 1.532253] [drm] Loading RS780 Microcode
with .35-rc5 it finds a different ammount of VRAM. Hardware wise there is 128M of sideport ram.
[ 1.361622] [drm] Initialized drm 1.1.0 20060810 [ 1.366843] [drm] radeon defaulting to kernel modesetting. [ 1.372863] [drm] radeon kernel modesetting enabled. [ 1.378371] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.386003] radeon 0000:01:05.0: setting latency timer to 64 [ 1.388242] [drm] initializing kernel modesetting (RS780 0x1002:0x9614). [ 1.395870] [drm] register mmio base: 0xFE9F0000 [ 1.400940] [drm] register mmio size: 65536 [ 1.406238] ATOM BIOS: B27722 [ 1.409531] [drm] Clocks initialized ! [ 1.413688] radeon 0000:01:05.0: VRAM: 384M 0xC0000000 - 0xD7FFFFFF (384M used) [ 1.421706] radeon 0000:01:05.0: GTT: 512M 0xA0000000 - 0xBFFFFFFF [ 1.429481] [drm] Detected VRAM RAM=384M, BAR=256M [ 1.436429] [drm] RAM width 32bits DDR [ 1.440829] [TTM] Zone kernel: Available graphics memory: 3956866 kiB. [ 1.448096] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 1.455348] [TTM] Initializing pool allocator. [ 1.460471] [drm] radeon: 384M of VRAM memory ready [ 1.465824] [drm] radeon: 512M of GTT memory ready. [ 1.471255] [drm] radeon: irq initialized. [ 1.475760] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 1.483280] [drm] Loading RS780 Microcode
User space/firmware/bios is the same in both cases.
Idea?
Ed Tomlinson
Quoted 5 lines · Ed Tomlinson
Hi,
My 790gx chipset supplies an rs780. With .34+ all is ok. With .35-rc5 basic function seems ok (kde works) but games like extreme tux racer have problems. The cursor does not display when on the tux racer window and various objects flicker on and off as I attempt to play the game.
Did you update anything on the userspace side (ddx, mesa, xserver)? Can you bisect what commit is causing the problems?
Quoted 36 lines
Here is what .34+ detects (think this kernel has a drm-radeon-testing from may or early june)
[ 1.370735] [drm] Initialized drm 1.1.0 20060810
[ 1.376014] [drm] radeon defaulting to kernel modesetting.
[ 1.382041] [drm] radeon kernel modesetting enabled.
[ 1.387560] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.395205] radeon 0000:01:05.0: setting latency timer to 64
[ 1.397347] [drm] initializing kernel modesetting (RS780 0x1002:0x9614). [ 1.404961] [drm] register mmio base:0xFE9F0000
[ 1.410036] [drm] register mmio size: 65536
[ 1.415328] ATOM BIOS: B27722
[ 1.418612] [drm] Clocks initialized !
[ 1.422740] [drm] 3 Power State(s)
[ 1.426486] [drm] State 0 Default (default)
[ 1.431081] [drm] 1 Clock Mode(s)
[ 1.434831] [drm] 0 engine: 300000
[ 1.438773] [drm] State 1 Performance
[ 1.442897] [drm] 1 Clock Mode(s)
[ 1.446648] [drm] 0 engine: 500000
[ 1.450589] [drm] State 2 Default
[ 1.454344] [drm] 1 Clock Mode(s)
[ 1.458093] [drm] 0 engine: 500000
[ 1.462038] [drm] radeon: power management initialized
[ 1.467705] radeon 0000:01:05.0: VRAM: 256M0xC0000000-0xCFFFFFFF(256M used) [ 1.475724] radeon 0000:01:05.0: GTT: 512M0xA0000000-0xBFFFFFFF[ 1.485117] [drm] Detected VRAM RAM=256M, BAR=256M
[ 1.490391] [drm] RAM width 32bits DDR
[ 1.494785] [TTM] Zone kernel: Available graphics memory: 3956838 kiB. [ 1.502042] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 1.509465] [drm] radeon: 256M of VRAM memory ready
[ 1.514825] [drm] radeon: 512M of GTT memory ready.
[ 1.520236] [drm] radeon: irq initialized.
[ 1.524739] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 1.532253] [drm] Loading RS780 Microcode
Quoted 1 line
with .35-rc5 it finds a different ammount of VRAM. Hardware wise there is 128M of sideport ram.
2.6.35 added support for vram greater then the size of the PCI framebuffer BAR (256 MB in your case). The amount of vram accessible to the CPU is limited by the size of the PCI framebuffer BAR, however the GPU can access the entire amount. 2.6.35 works around this restriction so that the CPU can access the entire amount of vram.
Alex
Quoted 33 lines
[ 1.361622] [drm] Initialized drm 1.1.0 20060810
[ 1.366843] [drm] radeon defaulting to kernel modesetting.
[ 1.372863] [drm] radeon kernel modesetting enabled.
[ 1.378371] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.386003] radeon 0000:01:05.0: setting latency timer to 64
[ 1.388242] [drm] initializing kernel modesetting (RS780 0x1002:0x9614). [ 1.395870] [drm] register mmio base:0xFE9F0000
[ 1.400940] [drm] register mmio size: 65536
[ 1.406238] ATOM BIOS: B27722
[ 1.409531] [drm] Clocks initialized !
[ 1.413688] radeon 0000:01:05.0: VRAM: 384M0xC0000000-0xD7FFFFFF(384M used) [ 1.421706] radeon 0000:01:05.0: GTT: 512M0xA0000000-0xBFFFFFFF[ 1.429481] [drm] Detected VRAM RAM=384M, BAR=256M
[ 1.436429] [drm] RAM width 32bits DDR
[ 1.440829] [TTM] Zone kernel: Available graphics memory: 3956866 kiB. [ 1.448096] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 1.455348] [TTM] Initializing pool allocator.
[ 1.460471] [drm] radeon: 384M of VRAM memory ready
[ 1.465824] [drm] radeon: 512M of GTT memory ready.
[ 1.471255] [drm] radeon: irq initialized.
[ 1.475760] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 1.483280] [drm] Loading RS780 MicrocodeUser space/firmware/bios is the same in both cases.
Idea?
Ed Tomlinson
_______________________________________________
dri-devel mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 6 lines · Ed Tomlinson
My 790gx chipset supplies an rs780. With .34+ all is ok. With .35-rc5 basic function seems ok (kde works) but games like extreme tux racer have problems. The cursor does not display when on the tux racer window and various objects flicker on and off as I attempt to play the game.
Sounds like it might be
https://bugs.freedesktop.org/show_bug.cgi?id=28341 . Does the X driver patch attached there fix the problem?
Signature · 6 lines
Earthling Michel Dänzer | http://www.vmware.com Libre software enthusiast | Debian, X and DRI developer _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel
Quoted 11 lines · On Monday 19 July 2010 10:34:20 Michel Dänzer wrote:
Quoted 6 lines · Ed Tomlinson
My 790gx chipset supplies an rs780. With .34+ all is ok. With .35-rc5 basic function seems ok (kde works) but games like extreme tux racer have problems. The cursor does not display when on the tux racer window and various objects flicker on and off as I attempt to play the game.
Sounds like it might be
https://bugs.freedesktop.org/show_bug.cgi?id=28341 . Does the X driver patch attached there fix the problem?
Michel,
xf86-video-ati git from today fails. Applying the revert patch in the above message fixes the problem. Its an interesting bug in that the kernel change triggers the driver bug. Might be a good idea to get this fixed, one way or another, before -35 gets released?
Let me know if you want me to test anything.
Thanks,
Ed Tomlinson
Quoted 13 lines · Ed Tomlinson
Quoted 11 lines · On Monday 19 July 2010 10:34:20 Michel Dänzer wrote:
Quoted 6 lines · Ed Tomlinson
My 790gx chipset supplies an rs780. With .34+ all is ok. With .35-rc5 basic function seems ok (kde works) but games like extreme tux racer have problems. The cursor does not display when on the tux racer window and various objects flicker on and off as I attempt to play the game.
Sounds like it might be
https://bugs.freedesktop.org/show_bug.cgi?id=28341 . Does the X driver patch attached there fix the problem?
Quoted 6 lines
Michel,
xf86-video-ati git from today fails. Applying the revert patch in the above message fixes the problem. Its an interesting bug in that the kernel change triggers the driver bug. Might be a good idea to get this fixed, one way or another, before -35 gets released?
It's basically a userspace bug, the buggy userspace code is just only active with new functionality in the new kernel.
Signature · 6 lines
Earthling Michel Dänzer | http://www.vmware.com Libre software enthusiast | Debian, X and DRI developer _______________________________________________ dri-devel mailing list [email protected] http://lists.freedesktop.org/mailman/listinfo/dri-devel