Skip to contentSkip to conversation

radeon: handle errors in radeon_hwmon_init()

PATCH Superseded Dan Carpenter 3 participants 4 messages Aug 7, 2010 – Aug 9, 2010

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 radeon: handle errors in radeon_hwmon_init()

Smatch complained that the ERR_PTR from hwmon_device_register() wasn't handled. I added some error handling in radeon_hwmon_init() to silence the warning.

Unfortunately errors from radeon_pm_init() aren't handled so this doesn't really make a difference beyond silencing the warning.

drivers/gpu/drm/radeon/radeon_pm.c +16 -4
index 95f8b3a..965e0f1 100644
@@ -472,9 +472,9 @@ static const struct attribute_group hwmon_attrgroup = {
 	.attrs = hwmon_attributes,
 };
 
-static void radeon_hwmon_init(struct radeon_device *rdev)
+static int radeon_hwmon_init(struct radeon_device *rdev)
 {
-	int err;
+	int err = 0;
 
 	rdev->pm.int_hwmon_dev = NULL;
 
@@ -483,15 +483,24 @@ static void radeon_hwmon_init(struct radeon_device *rdev)
 	case THERMAL_TYPE_RV770:
 	case THERMAL_TYPE_EVERGREEN:
 		rdev->pm.int_hwmon_dev = hwmon_device_register(rdev->dev);
+		if (IS_ERR(rdev->pm.int_hwmon_dev)) {
+			err = PTR_ERR(rdev->pm.int_hwmon_dev);
+			DRM_ERROR("Unable to register hwmon device: %d\n", err);
+			break;
+		}
 		dev_set_drvdata(rdev->pm.int_hwmon_dev, rdev->ddev);
 		err = sysfs_create_group(&rdev->pm.int_hwmon_dev->kobj,
 					 &hwmon_attrgroup);
-		if (err)
+		if (err) {
 			DRM_ERROR("Unable to create hwmon sysfs file: %d\n", err);
+			hwmon_device_unregister(rdev->dev);
+		}
 		break;
 	default:
 		break;
 	}
+
+	return err;
 }
 
 static void radeon_hwmon_fini(struct radeon_device *rdev)
@@ -540,6 +549,7 @@ void radeon_pm_resume(struct radeon_device *rdev)
 int radeon_pm_init(struct radeon_device *rdev)
 {
 	int ret;
+
 	/* default to profile method */
 	rdev->pm.pm_method = PM_METHOD_PROFILE;
 	rdev->pm.profile = PM_PROFILE_DEFAULT;
@@ -561,7 +571,9 @@ int radeon_pm_init(struct radeon_device *rdev)
 	}
 
 	/* set up the internal thermal sensor if applicable */
-	radeon_hwmon_init(rdev);
+	ret = radeon_hwmon_init(rdev);
+	if (ret)
+		return ret;
 	if (rdev->pm.num_power_states > 1) {
 		/* where's the best place to put these? */
 		ret = device_create_file(rdev->dev, &dev_attr_power_profile);
#1 lore raw

2010/8/8 Dan Carpenter <[email protected]>:

Quoted 8 lines

Smatch complained that the ERR_PTR from hwmon_device_register() wasn't handled.  I added some error handling in radeon_hwmon_init() to silence the warning.

Unfortunately errors from radeon_pm_init() aren't handled so this doesn't really make a difference beyond silencing the warning.

Didn't we try to switch from DRM_ERROR to dev_err? I think that's preferred method.

Signature · 1 line
Rafał
Reviewed-by
#2 lore raw

2010/8/7 Rafał Miłecki <[email protected]>:

Quoted 5 lines

2010/8/8 Dan Carpenter <[email protected]>:

Quoted 4 lines

Smatch complained that the ERR_PTR from hwmon_device_register() wasn't handled.  I added some error handling in radeon_hwmon_init() to silence the warning.

Quoted 7 lines
Quoted 4 lines

Unfortunately errors from radeon_pm_init() aren't handled so this doesn't really make a difference beyond silencing the warning.

Didn't we try to switch from DRM_ERROR to dev_err? I think that's preferred method.

Other than that, the patch looks fine.

#3 lore raw

PATCH v2 1/1 radeon: handle errors in radeon_hwmon_init()

In reply to Rafał Miłecki

Smatch complained that the ERR_PTR from hwmon_device_register() wasn't handled.  I added some error handling in radeon_hwmon_init() to silence the warning.

Unfortunately errors from radeon_pm_init() aren't handled so this doesn't really make a difference beyond silencing the warning.

Also I changed DRM_ERROR() to dev_err() which is the new preferred method.

---
V2: switched from DRM_ERROR() to dev_err()

drivers/gpu/drm/radeon/radeon_pm.c +19 -5
index 95f8b3a..58038f5 100644
@@ -472,9 +472,9 @@ static const struct attribute_group hwmon_attrgroup = {
 	.attrs = hwmon_attributes,
 };
 
-static void radeon_hwmon_init(struct radeon_device *rdev)
+static int radeon_hwmon_init(struct radeon_device *rdev)
 {
-	int err;
+	int err = 0;
 
 	rdev->pm.int_hwmon_dev = NULL;
 
@@ -483,15 +483,26 @@ static void radeon_hwmon_init(struct radeon_device *rdev)
 	case THERMAL_TYPE_RV770:
 	case THERMAL_TYPE_EVERGREEN:
 		rdev->pm.int_hwmon_dev = hwmon_device_register(rdev->dev);
+		if (IS_ERR(rdev->pm.int_hwmon_dev)) {
+			err = PTR_ERR(rdev->pm.int_hwmon_dev);
+			dev_err(rdev->dev,
+				"Unable to register hwmon device: %d\n", err);
+			break;
+		}
 		dev_set_drvdata(rdev->pm.int_hwmon_dev, rdev->ddev);
 		err = sysfs_create_group(&rdev->pm.int_hwmon_dev->kobj,
 					 &hwmon_attrgroup);
-		if (err)
-			DRM_ERROR("Unable to create hwmon sysfs file: %d\n", err);
+		if (err) {
+			dev_err(rdev->dev,
+				"Unable to create hwmon sysfs file: %d\n", err);
+			hwmon_device_unregister(rdev->dev);
+		}
 		break;
 	default:
 		break;
 	}
+
+	return err;
 }
 
 static void radeon_hwmon_fini(struct radeon_device *rdev)
@@ -540,6 +551,7 @@ void radeon_pm_resume(struct radeon_device *rdev)
 int radeon_pm_init(struct radeon_device *rdev)
 {
 	int ret;
+
 	/* default to profile method */
 	rdev->pm.pm_method = PM_METHOD_PROFILE;
 	rdev->pm.profile = PM_PROFILE_DEFAULT;
@@ -561,7 +573,9 @@ int radeon_pm_init(struct radeon_device *rdev)
 	}
 
 	/* set up the internal thermal sensor if applicable */
-	radeon_hwmon_init(rdev);
+	ret = radeon_hwmon_init(rdev);
+	if (ret)
+		return ret;
 	if (rdev->pm.num_power_states > 1) {
 		/* where's the best place to put these? */
 		ret = device_create_file(rdev->dev, &dev_attr_power_profile);

--
To unsubscribe from this list: send the line "unsubscribe kernel-janitors" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html