Skip to contentSkip to conversation

omap: rx51: Add bq27200 battery platform data

PATCH Superseded Luke-Jr 3 participants 4 messages Aug 15, 2010 – Aug 16, 2010

Subsystems (3)
Arm (32-bit) Arm sub-architectures OMAP2+ support
lore
Share & tools
lore

Luke-Jr

author
#0 lore raw

PATCH 1/1 omap: rx51: Add bq27200 battery platform data

Signed-off-by Luke Dashjr <[email protected]>
---
 arch/arm/mach-omap2/board-rx51-peripherals.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)
arch/arm/mach-omap2/board-rx51-peripherals.c +3 -0
index 0348392..4131cc6 100644
@@ -731,6 +731,9 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
 	{
 		I2C_BOARD_INFO("tlv320aic3x", 0x18),
 	},
+	{
+		I2C_BOARD_INFO("bq27200", 0x55),
+	},
 };
 
 static int __init rx51_i2c_init(void)
Signature · 1 line
1.7.1
#1 lore raw
Quoted 10 lines · On Sun, 15 Aug 2010 01:12:10 -0500 "Luke-Jr" <[email protected]> wrote:
Signed-off-by Luke Dashjr <[email protected]>
---
 arch/arm/mach-omap2/board-rx51-peripherals.c |    3 +++
 1 files changed, 3 insertions(+), 0 deletions(-)
arch/arm/mach-omap2/board-rx51-peripherals.c +0 -0
index 0348392..4131cc6 100644

arch/arm/mach-omap2/board-rx51-peripherals.c static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { · line 738

Quoted 8 lines
arch/arm/mach-omap2/board-rx51-peripherals.c +3 -0
@@ -731,6 +731,9 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = {
 	{
 		I2C_BOARD_INFO("tlv320aic3x", 0x18),
 	},
+	{
+		I2C_BOARD_INFO("bq27200", 0x55),
+	},
 };

Hi

There has been changes in board-rx51-peripherals.c and patch doesn't apply. Could you refresh this patch against linux-2.6 or linux-omap tree.

Signature · 1 line
Jarkko
author
#2 lore raw

PATCH v2 1/1 omap: rx51: Add bq27200 battery platform data

Signed-off-by Luke Dashjr <[email protected]>
---
 arch/arm/mach-omap2/board-rx51-peripherals.c |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)
arch/arm/mach-omap2/board- renamed from arch/arm/mach-omap2/board-rx51-peripherals.c +0 -0

rx51-peripherals.c
index 9a5eb87..2c694d4 100644

arch/arm/mach-omap2/board-rx51-peripherals.c +0 -0
@@ -739,6 +739,11 @@ static struct i2c_board_info __initdata

rx51_peripherals_i2c_board_info_2[] = {
.platform_data = &rx51_tsl2563_platform_data,
},
#endif
+#if defined(CONFIG_BATTERY_BQ27x00) || defined(CONFIG_BATTERY_BQ27x00_MODULE)
+ {
+ I2C_BOARD_INFO("bq27200", 0x55),
+ },
+#endif
{
I2C_BOARD_INFO("tpa6130a2", 0x60),
.platform_data = &rx51_tpa6130a2_data,

Signature · 1 line
1.7.1
#3 lore raw

Hi,

Quoted 11 lines · Luke-Jr
Signed-off-by Luke Dashjr <[email protected]>
---
 arch/arm/mach-omap2/board-rx51-peripherals.c |    5 +++++
 1 files changed, 5 insertions(+), 0 deletions(-)
arch/arm/mach-omap2/board- renamed from arch/arm/mach-omap2/board-rx51-peripherals.c +0 -0

rx51-peripherals.c
index 9a5eb87..2c694d4 100644

arch/arm/mach-omap2/board-rx51-peripherals.c static struct i2c_board_info __initdata · line 747

Quoted 9 lines
arch/arm/mach-omap2/board-rx51-peripherals.c +5 -0
@@ -739,6 +739,11 @@ static struct i2c_board_info __initdata 
 rx51_peripherals_i2c_board_info_2[] = {
 		.platform_data = &rx51_tsl2563_platform_data,
 	},
 #endif
+#if defined(CONFIG_BATTERY_BQ27x00) || defined(CONFIG_BATTERY_BQ27x00_MODULE)
+	{
+		I2C_BOARD_INFO("bq27200", 0x55),
+	},
+#endif

i don't think the ifdefs are necessary. It won't change much keeping bq2700 even if it's not enabled.

Signature · 1 line
balbi