ata_sff_drain_fifo
Hello,
I have a question about the ata_sff_drain_fifo.
I saw it drains the fifo while the ATA_DRQ flag is on.
In my case, I sometimes get a stuck device and this drain is inefficient, trying to figure out why, I noticed the following :
Jun 9 20:28:36 w11190100sav kernel: ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen Jun 9 20:28:36 w11190100sav kernel: ata4.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 Jun 9 20:28:36 w11190100sav kernel: res 40/00:03:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
Jun 9 20:28:43 w11190100sav kernel: ata4: port is slow to respond, please be patient (Status 0xd0)
Jun 9 20:29:06 w11190100sav kernel: ata4: port failed to respond (30 secs, Status 0xd0)
Jun 9 20:29:06 w11190100sav kernel: ata4: soft resetting port
Jun 9 20:29:06 w11190100sav kernel: ATA: abnormal status 0xD0 on port 0x0001cc07
Jun 9 20:29:06 w11190100sav last message repeated 4 times
Jun 9 20:29:36 w11190100sav kernel: ata4.00: qc timeout (cmd 0xa1)
Jun 9 20:29:36 w11190100sav kernel: ata4.00: failed to IDENTIFY (I/O error, err_mask=0x4)
Jun 9 20:29:36 w11190100sav kernel: ata4.00: revalidation failed (errno=-5)
Jun 9 20:29:36 w11190100sav kernel: ata4: failed to recover some devices, retrying in 5 secs
Jun 9 20:29:49 w11190100sav kernel: ata4: port is slow to respond, please be patient (Status 0xd0)
so the status is 0xD0.
In include/linux/ata.h I see :
ATA_BUSY = (1 << 7), /* BSY status bit */ ... ATA_DRQ = (1 << 3), /* data request i/o */
so I guess when status is 0xD0, ATA_DRQ is not set but ATA_BUSY is. It would explain why in my case it doesn't drain anything before trying to reset.
Would it be of any interest to drain the fifo also when the ATA_BUSY flag is on, not only the ATA_DRQ ?
Pascal
Quoted 4 lines
so I guess when status is
0xD0,ATA_DRQis not set butATA_BUSYis. It would explain why in my case it doesn't drain anything before trying to reset.Would it be of any interest to drain the fifo also when the
ATA_BUSYflag is on, not only theATA_DRQ?
If the drive has the busy flag set it is busy, all we can do is wait for it and if that fails try to reset it. The FIFO drain handles a specific case where the two ends disagree about the amount of data expected, and often lets us avoid a reset.
Alan
Alan Cox a écrit, le mer 18 aoû 2010 à 12:44:12 :
Quoted 9 lines
Quoted 4 lines
so I guess when status is
0xD0,ATA_DRQis not set butATA_BUSYis. It would explain why in my case it doesn't drain anything before trying to reset.Would it be of any interest to drain the fifo also when the
ATA_BUSYflag is on, not only theATA_DRQ?If the drive has the busy flag set it is busy, all we can do is wait for it and if that fails try to reset it. The FIFO drain handles a specific case where the two ends disagree about the amount of data expected, and often lets us avoid a reset.
Ok. I also noticed that qc->dma_dir=DMA_TO_DEVICE which also prevents the draining.
I thought it could be a solution for certain problems like mine where the device is busy but the reset doesn't work which brings to a blocking point, but no.
Pascal
Quoted 2 lines
Alan
Quoted 2 lines
Ok. I also noticed that qc->dma_dir=DMA_TO_DEVICE which also prevents the draining.
I thought it could be a solution for certain problems like mine where the device is busy but the reset doesn't work which brings to a blocking point, but no.
It shouldn't unless there is a specific IDE controller need to drain data. You could try it and see what it does but I doubt it will help - but who knows 8)