commit 7b2bfdb broke sound card detection on my Lenovo T400s
Hi,
Please always CC me since I'm not subscribed to the mailing lists.
I have a problem since commit id 7b2bfdb (about 2.6.35-rc2) up to the latest HEAD on my Lenovo T400s laptop. Just found out while testing Ubuntu 10.10.
Problem is: Headphones don't work any more, internal Microphone doesn't work any more. However, if I load snd-hda-intel with the option model=ideapad the mic and the headphones work perfectly well again. For now that is an acceptable work around. However, before the aforementioned commit I didn't have to provide any module parameters.
Before rev 7b2bfdb I had:
└[a8@t4]-~→find /proc/asound/card* -type f | grep codec | xargs grep \
"^Codec\|^Vendor Id\|^Subsystem Id\|^Revision Id"Codec: Conexant ID 5069
Vendor Id: 0x14f15069
Subsystem Id: 0x17aa2132
Revision Id: 0x100300
Starting with rev 7b2bfdb I get:
└[a8@t4]-~→find /proc/asound/card* -type f | grep codec | xargs grep \
"^Codec\|^Vendor Id\|^Subsystem Id\|^Revision Id"Codec: Conexant CX20585
Vendor Id: 0x14f15069
Subsystem Id: 0x17aa2132
Revision Id: 0x100300
BTW, all the bisecting is done out of the linus.git tree.
Thank you for looking into that. I'm happy to provide more information or test patches.
Thanks,
Frank
Signature · 4 lines
Frank Becker <[email protected]> (jabber|mail) | http://twitter.com/41i3n8 GnuPG: 0xADC29ECD | F01B 5E9C 1D09 981B 5B40 50D3 C80F 7459 ADC2 9ECD SILC-Net: a8 | Home: http://www.alien8.de | <<</>> http://www.c3d2.de "> Freedom is just chaos, with better lighting. <" Alan Dean Foster
A message that is not in the archive (sent off-list or not yet received): [email protected]
At Tue, 7 Sep 2010 00:45:48 +0200,
Quoted 53 lines · Jens Taprogge
Quoted 30 lines · Frank Becker
Hi,
Please always CC me since I'm not subscribed to the mailing lists.
I have a problem since commit id 7b2bfdb (about 2.6.35-rc2) up to the latest HEAD on my Lenovo T400s laptop. Just found out while testing Ubuntu 10.10.
Problem is: Headphones don't work any more, internal Microphone doesn't work any more. However, if I load snd-hda-intel with the option model=ideapad the mic and the headphones work perfectly well again. For now that is an acceptable work around. However, before the aforementioned commit I didn't have to provide any module parameters.
Before rev 7b2bfdb I had:
└[a8@t4]-~→find /proc/asound/card* -type f | grep codec | xargs grep \ "^Codec\|^Vendor Id\|^Subsystem Id\|^Revision Id"Codec: Conexant ID 5069
Vendor Id:0x14f15069
Subsystem Id:0x17aa2132
Revision Id:0x100300Starting with rev 7b2bfdb I get:
└[a8@t4]-~→find /proc/asound/card* -type f | grep codec | xargs grep \ "^Codec\|^Vendor Id\|^Subsystem Id\|^Revision Id"Codec: Conexant CX20585
Vendor Id:0x14f15069
Subsystem Id:0x17aa2132
Revision Id:0x100300Quoted 15 lines
BTW, all the bisecting is done out of the linus.git tree.
Thank you for looking into that. I'm happy to provide more information or test patches.
Thanks,
Frank
Signature · 4 lines
Frank Becker <[email protected]> (jabber|mail) | http://twitter.com/41i3n8 GnuPG: 0xADC29ECD | F01B 5E9C 1D09 981B 5B40 50D3 C80F 7459 ADC2 9ECD SILC-Net: a8 | Home: http://www.alien8.de | <<</>> http://www.c3d2.de "> Freedom is just chaos, with better lighting. <" Alan Dean FosterHello Frank,
apparently the devices are wired differently on the T410s (which works here) and the T400s.
Quoted 6 lines
Have you tried playing with the mixers? There might be additional ones present after the patch.
Also when you say things work perfectly when specifying "model=ideapad", does that include automatic switching between internal and external microphones? Have you attached your T410 to a docking station?
Also, it'd be helpful if alsa-info.sh output is given. Jens, Frank, could you guys run it with --no-upload option and attach the output for comparison?
thanks,
Takashi
--
To unsubscribe from this list: send the line "unsubscribe alsa-devel" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Takashi Iwai [2010-09-07, 08:17 +0200]:
Quoted 4 lines
At Tue, 7 Sep 2010 00:45:48 +0200,
Quoted 2 lines · Jens Taprogge
On Mon, Sep 06, 2010 at 07:04:21PM +0200, Frank Becker wrote:
Hi,
Quoted 3 lines
Also, it'd be helpful if
alsa-info.shoutput is given. Jens, Frank, could you guys run it with --no-upload option and attach the output for comparison?
Sorry, I wasn't aware of this fine tool.
Hope, it's OK to upload it as well. Don't want to fill up everyones mboxes again
2.6.32: http://www.alsa-project.org/db/?f=f985e74bdda393213a29c6243012a7a8ea1dfe1f
2.6.35-broken: http://www.alsa-project.org/db/?f=827e4ef1a0d6c726a09fc5801853aa2ba58225ed
2.6.35-ideapad: http://www.alsa-project.org/db/?f=01e6a47003948f33aeb8ff132b64d4bc4ecc73b8
Bye,
Frank
Signature · 4 lines
Frank Becker <[email protected]> (jabber|mail) | http://twitter.com/41i3n8 GnuPG: 0xADC29ECD | F01B 5E9C 1D09 981B 5B40 50D3 C80F 7459 ADC2 9ECD SILC-Net: a8 | Home: http://www.alien8.de | <<</>> http://www.c3d2.de "> Freedom is just chaos, with better lighting. <" Alan Dean Foster
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Takashi Iwai [2010-09-07, 08:17 +0200]:
Quoted 4 lines
At Tue, 7 Sep 2010 00:45:48 +0200,
Quoted 2 lines · Jens Taprogge
On Mon, Sep 06, 2010 at 07:04:21PM +0200, Frank Becker wrote:
Hi,
Quoted 3 lines
Also, it'd be helpful if
alsa-info.shoutput is given. Jens, Frank, could you guys run it with --no-upload option and attach the output for comparison?
Sorry, I wasn't aware of this fine tool.
Hope, it's OK to upload it as well. Don't want to fill up everyones mboxes again
2.6.32: http://www.alsa-project.org/db/?f=f985e74bdda393213a29c6243012a7a8ea1dfe1f
2.6.35-broken: http://www.alsa-project.org/db/?f=827e4ef1a0d6c726a09fc5801853aa2ba58225ed
2.6.35-ideapad: http://www.alsa-project.org/db/?f=01e6a47003948f33aeb8ff132b64d4bc4ecc73b8
Bye,
Frank
Signature · 4 lines
Frank Becker <[email protected]> (jabber|mail) | http://twitter.com/41i3n8 GnuPG: 0xADC29ECD | F01B 5E9C 1D09 981B 5B40 50D3 C80F 7459 ADC2 9ECD SILC-Net: a8 | Home: http://www.alien8.de | <<</>> http://www.c3d2.de "> Freedom is just chaos, with better lighting. <" Alan Dean Foster
At Tue, 7 Sep 2010 11:02:20 +0200,
Quoted 12 lines · Frank Becker
Takashi Iwai [2010-09-07, 08:17 +0200]:
Quoted 4 lines
At Tue, 7 Sep 2010 00:45:48 +0200,
Quoted 2 lines · Jens Taprogge
On Mon, Sep 06, 2010 at 07:04:21PM +0200, Frank Becker wrote:
Hi,
Quoted 3 lines
Also, it'd be helpful if
alsa-info.shoutput is given. Jens, Frank, could you guys run it with --no-upload option and attach the output for comparison?
Quoted 8 lines
Sorry, I wasn't aware of this fine tool.
Hope, it's OK to upload it as well. Don't want to fill up everyones mboxes again
2.6.32: http://www.alsa-project.org/db/?f=f985e74bdda393213a29c6243012a7a8ea1dfe1f
2.6.35-broken: http://www.alsa-project.org/db/?f=827e4ef1a0d6c726a09fc5801853aa2ba58225ed
2.6.35-ideapad: http://www.alsa-project.org/db/?f=01e6a47003948f33aeb8ff132b64d4bc4ecc73b8
When you run it --no-upload option, you'll get the file on your local machine. Anyway, I don't see why Jens' patch breaks your machine. The PCI SSID (not codec SSID) of his machine is 17aa:215e while yours is 17aa:20f2. The breakage can be a coincidence.
Could you check whether model=thinkpad works better? If yes, we can simply add the new entry for your device.
thanks,
Takashi
Takashi Iwai [2010-09-07, 11:20 +0200]:
Quoted 8 lines
At Tue, 7 Sep 2010 11:02:20 +0200,
Quoted 6 lines · Frank Becker
Takashi Iwai [2010-09-07, 08:17 +0200]:
Quoted 4 lines
At Tue, 7 Sep 2010 00:45:48 +0200,
Quoted 2 lines · Jens Taprogge
On Mon, Sep 06, 2010 at 07:04:21PM +0200, Frank Becker wrote:
Hi,
[...]
Quoted 5 lines
machine. Anyway, I don't see why Jens' patch breaks your machine. The PCI SSID (not codec SSID) of his machine is 17aa:215e while yours is 17aa:20f2. The breakage can be a coincidence.
Could you check whether model=thinkpad works better?
Works as model=ideapad IOW, yes that works perfectly well.
Quoted 1 line
If yes, we can simply add the new entry for your device.
Great. Thank you.
Bye,
Frank
Signature · 4 lines
Frank Becker <[email protected]> (jabber|mail) | http://twitter.com/41i3n8 GnuPG: 0xADC29ECD | F01B 5E9C 1D09 981B 5B40 50D3 C80F 7459 ADC2 9ECD SILC-Net: a8 | Home: http://www.alien8.de | <<</>> http://www.c3d2.de "> Freedom is just chaos, with better lighting. <" Alan Dean Foster
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Takashi Iwai [2010-09-07, 11:20 +0200]:
Quoted 8 lines
At Tue, 7 Sep 2010 11:02:20 +0200,
Quoted 6 lines · Frank Becker
Takashi Iwai [2010-09-07, 08:17 +0200]:
Quoted 4 lines
At Tue, 7 Sep 2010 00:45:48 +0200,
Quoted 2 lines · Jens Taprogge
On Mon, Sep 06, 2010 at 07:04:21PM +0200, Frank Becker wrote:
Hi,
[...]
Quoted 5 lines
machine. Anyway, I don't see why Jens' patch breaks your machine. The PCI SSID (not codec SSID) of his machine is 17aa:215e while yours is 17aa:20f2. The breakage can be a coincidence.
Could you check whether model=thinkpad works better?
Works as model=ideapad IOW, yes that works perfectly well.
Quoted 1 line
If yes, we can simply add the new entry for your device.
Great. Thank you.
Bye,
Frank
Signature · 4 lines
Frank Becker <[email protected]> (jabber|mail) | http://twitter.com/41i3n8 GnuPG: 0xADC29ECD | F01B 5E9C 1D09 981B 5B40 50D3 C80F 7459 ADC2 9ECD SILC-Net: a8 | Home: http://www.alien8.de | <<</>> http://www.c3d2.de "> Freedom is just chaos, with better lighting. <" Alan Dean Foster
At Tue, 7 Sep 2010 11:40:41 +0200,
Quoted 13 lines · Frank Becker
Takashi Iwai [2010-09-07, 11:20 +0200]:
Quoted 8 lines
At Tue, 7 Sep 2010 11:02:20 +0200,
Quoted 6 lines · Frank Becker
Takashi Iwai [2010-09-07, 08:17 +0200]:
Quoted 4 lines
At Tue, 7 Sep 2010 00:45:48 +0200,
Quoted 2 lines · Jens Taprogge
On Mon, Sep 06, 2010 at 07:04:21PM +0200, Frank Becker wrote:
Hi,
Quoted 7 lines
[...]
Quoted 5 lines
machine. Anyway, I don't see why Jens' patch breaks your machine. The PCI SSID (not codec SSID) of his machine is 17aa:215e while yours is 17aa:20f2. The breakage can be a coincidence.
Could you check whether model=thinkpad works better?
Works as model=ideapad IOW, yes that works perfectly well.
Oh, one forgotten question is whether your machine can have a docking station. If yes, model=thinkpad is the right choice. If not, model=ideapad would work more or less same.
thanks,
Takashi
Takashi Iwai [2010-09-07, 11:44 +0200]:
Quoted 12 lines
At Tue, 7 Sep 2010 11:40:41 +0200,
Quoted 10 lines · Frank Becker
Takashi Iwai [2010-09-07, 11:20 +0200]:
Quoted 8 lines
At Tue, 7 Sep 2010 11:02:20 +0200,
Quoted 6 lines · Frank Becker
Takashi Iwai [2010-09-07, 08:17 +0200]:
Quoted 4 lines
At Tue, 7 Sep 2010 00:45:48 +0200,
Quoted 2 lines · Jens Taprogge
On Mon, Sep 06, 2010 at 07:04:21PM +0200, Frank Becker wrote:
Hi,
[...]
Quoted 3 lines
Oh, one forgotten question is whether your machine can have a docking station. If yes, model=thinkpad is the right choice. If not, model=ideapad would work more or less same.
Yes[0]. With that model (T400s [1]) Lenovo introduced a new series of docking stations that are not backward compatible with older Lenovo/ThinkPads.
I just don't happen to have one available.
Bye and Thanks,
Frank
Signature · 4 lines
Frank Becker <[email protected]> (jabber|mail) | http://twitter.com/41i3n8 GnuPG: 0xADC29ECD | F01B 5E9C 1D09 981B 5B40 50D3 C80F 7459 ADC2 9ECD SILC-Net: a8 | Home: http://www.alien8.de | <<</>> http://www.c3d2.de "> Freedom is just chaos, with better lighting. <" Alan Dean Foster
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Takashi Iwai [2010-09-07, 11:44 +0200]:
Quoted 12 lines
At Tue, 7 Sep 2010 11:40:41 +0200,
Quoted 10 lines · Frank Becker
Takashi Iwai [2010-09-07, 11:20 +0200]:
Quoted 8 lines
At Tue, 7 Sep 2010 11:02:20 +0200,
Quoted 6 lines · Frank Becker
Takashi Iwai [2010-09-07, 08:17 +0200]:
Quoted 4 lines
At Tue, 7 Sep 2010 00:45:48 +0200,
Quoted 2 lines · Jens Taprogge
On Mon, Sep 06, 2010 at 07:04:21PM +0200, Frank Becker wrote:
Hi,
[...]
Quoted 3 lines
Oh, one forgotten question is whether your machine can have a docking station. If yes, model=thinkpad is the right choice. If not, model=ideapad would work more or less same.
Yes[0]. With that model (T400s [1]) Lenovo introduced a new series of docking stations that are not backward compatible with older Lenovo/ThinkPads.
I just don't happen to have one available.
Bye and Thanks,
Frank
Signature · 4 lines
Frank Becker <[email protected]> (jabber|mail) | http://twitter.com/41i3n8 GnuPG: 0xADC29ECD | F01B 5E9C 1D09 981B 5B40 50D3 C80F 7459 ADC2 9ECD SILC-Net: a8 | Home: http://www.alien8.de | <<</>> http://www.c3d2.de "> Freedom is just chaos, with better lighting. <" Alan Dean Foster
At Tue, 7 Sep 2010 11:53:00 +0200,
Quoted 21 lines · Frank Becker
Takashi Iwai [2010-09-07, 11:44 +0200]:
Quoted 12 lines
At Tue, 7 Sep 2010 11:40:41 +0200,
Quoted 10 lines · Frank Becker
Takashi Iwai [2010-09-07, 11:20 +0200]:
Quoted 8 lines
At Tue, 7 Sep 2010 11:02:20 +0200,
Quoted 6 lines · Frank Becker
Takashi Iwai [2010-09-07, 08:17 +0200]:
Quoted 4 lines
At Tue, 7 Sep 2010 00:45:48 +0200,
Quoted 2 lines · Jens Taprogge
On Mon, Sep 06, 2010 at 07:04:21PM +0200, Frank Becker wrote:
Hi,
[...]
Quoted 3 lines
Oh, one forgotten question is whether your machine can have a docking station. If yes, model=thinkpad is the right choice. If not, model=ideapad would work more or less same.
Quoted 8 lines
Yes[0]. With that model (T400s [1]) Lenovo introduced a new series of docking stations that are not backward compatible with older Lenovo/ThinkPads.
I just don't happen to have one available.
OK, fixed now in sound git tree.
thanks,
Takashi
Takashi Iwai [2010-09-07, 12:06 +0200]:
Quoted 2 lines
At Tue, 7 Sep 2010 11:53:00 +0200,
Frank Becker wrote:
Hi,
Quoted 1 line
OK, fixed now in sound git tree.
It's my pleasure to confirm that commit 4d15564 of this repo did resolve the reported issue on my T400s. Awesome! Took just one day.
It would be appreciated if someone having access to a docking station would test if the external microphone works as well.
Thank you a lot Takashi!
Frank
Signature · 4 lines
Frank Becker <[email protected]> (jabber|mail) | http://twitter.com/41i3n8 GnuPG: 0xADC29ECD | F01B 5E9C 1D09 981B 5B40 50D3 C80F 7459 ADC2 9ECD SILC-Net: a8 | Home: http://www.alien8.de | <<</>> http://www.c3d2.de "> Freedom is just chaos, with better lighting. <" Alan Dean Foster
Quoted 20 lines · Frank Becker
Takashi Iwai [2010-09-07, 11:44 +0200]:
Quoted 12 lines
At Tue, 7 Sep 2010 11:40:41 +0200,
Quoted 10 lines · Frank Becker
Takashi Iwai [2010-09-07, 11:20 +0200]:
Quoted 8 lines
At Tue, 7 Sep 2010 11:02:20 +0200,
Quoted 6 lines · Frank Becker
Takashi Iwai [2010-09-07, 08:17 +0200]:
Quoted 4 lines
At Tue, 7 Sep 2010 00:45:48 +0200,
Quoted 2 lines · Jens Taprogge
On Mon, Sep 06, 2010 at 07:04:21PM +0200, Frank Becker wrote:
Hi,
[...]
Quoted 3 lines
Oh, one forgotten question is whether your machine can have a docking station. If yes, model=thinkpad is the right choice. If not, model=ideapad would work more or less same.
Quoted 8 lines
Yes[0]. With that model (T400s [1]) Lenovo introduced a new series of docking stations that are not backward compatible with older Lenovo/ThinkPads.
I just don't happen to have one available.
Hello Frank.
That is the docking station I have developed the patch with. So hopefully after adding your PCI IDs it should work with your Thinkpad as well.
Best Regards
Jens
Quoted 20 lines · Frank Becker
Takashi Iwai [2010-09-07, 11:44 +0200]:
Quoted 12 lines
At Tue, 7 Sep 2010 11:40:41 +0200,
Quoted 10 lines · Frank Becker
Takashi Iwai [2010-09-07, 11:20 +0200]:
Quoted 8 lines
At Tue, 7 Sep 2010 11:02:20 +0200,
Quoted 6 lines · Frank Becker
Takashi Iwai [2010-09-07, 08:17 +0200]:
Quoted 4 lines
At Tue, 7 Sep 2010 00:45:48 +0200,
Quoted 2 lines · Jens Taprogge
On Mon, Sep 06, 2010 at 07:04:21PM +0200, Frank Becker wrote:
Hi,
[...]
Quoted 3 lines
Oh, one forgotten question is whether your machine can have a docking station. If yes, model=thinkpad is the right choice. If not, model=ideapad would work more or less same.
Quoted 8 lines
Yes[0]. With that model (T400s [1]) Lenovo introduced a new series of docking stations that are not backward compatible with older Lenovo/ThinkPads.
I just don't happen to have one available.
Hello Frank.
That is the docking station I have developed the patch with. So hopefully after adding your PCI IDs it should work with your Thinkpad as well.
Best Regards
Jens
Quoted 20 lines · Frank Becker
Takashi Iwai [2010-09-07, 11:44 +0200]:
Quoted 12 lines
At Tue, 7 Sep 2010 11:40:41 +0200,
Quoted 10 lines · Frank Becker
Takashi Iwai [2010-09-07, 11:20 +0200]:
Quoted 8 lines
At Tue, 7 Sep 2010 11:02:20 +0200,
Quoted 6 lines · Frank Becker
Takashi Iwai [2010-09-07, 08:17 +0200]:
Quoted 4 lines
At Tue, 7 Sep 2010 00:45:48 +0200,
Quoted 2 lines · Jens Taprogge
On Mon, Sep 06, 2010 at 07:04:21PM +0200, Frank Becker wrote:
Hi,
[...]
Quoted 3 lines
Oh, one forgotten question is whether your machine can have a docking station. If yes, model=thinkpad is the right choice. If not, model=ideapad would work more or less same.
Quoted 8 lines
Yes[0]. With that model (T400s [1]) Lenovo introduced a new series of docking stations that are not backward compatible with older Lenovo/ThinkPads.
I just don't happen to have one available.
Hello Frank.
That is the docking station I have developed the patch with. So hopefully after adding your PCI IDs it should work with your Thinkpad as well.
Best Regards
Jens
Jens Taprogge [2010-09-07, 01:18 +0200]:
Quoted 1 line · Frank Becker
Hi,
Quoted 7 lines
Quoted 7 lines
I have a problem since commit id 7b2bfdb (about 2.6.35-rc2) up to the latest HEAD on my Lenovo T400s laptop. Just found out while testing Ubuntu 10.10.
Problem is: Headphones don't work any more, internal Microphone doesn't work any more. However, if I load snd-hda-intel with the option model=ideapad the mic and the headphones work perfectly well again. For now
[...]
Quoted 2 lines
apparently the devices are wired differently on the T410s (which works here) and the T400s.
Sure. As far as I understand Lenovo is not putting any kind of effort into Linux support. It's hard to test without hardware.
Quoted 1 line
Have you tried playing with the mixers?
Sure, I tried everything I could think of. In the process I found out that I have to power off my machine. Otherwise the mic was not working sometimes after just rebooting from a non working revision into a usually working one.
Quoted 2 lines
There might be additional ones
present after the patch.
Indeed there are. Not to clutter up the mail I put this to the end of this message.
Quoted 3 lines
Also when you say things work perfectly when specifying "model=ideapad", does that include automatic switching between internal and external microphones? Have you attached your T410 to a docking station?
I don't have a docking station for my T400s. Sorry, cannot test that.
The headphone jack also has a mic in connector (TRRS connector). There the mic works fine. That has nothing to do with the docking station though.
The cluttered details:
2.6.35 snd-hda-intel model="ideapad" (works)
============================================
└[a8@t4]-~ cat /proc/asound/devices 2: : timer 3: : sequencer 4: [29] : control
5: [ 0- 0]: digital audio playback
6: [ 0- 0]: digital audio capture
7: [ 0- 0]: hardware dependent
8: [ 0] : control
mixer devices (alsamixer)
Master PCM Capture "Analog Mic Boost"
└[a8@t4]-~ cat /proc/asound/card0/codec\#0|grep -i mic
Pin Default 0x61a190f0: [N/A] Mic at Sep Rear
Pin Default 0x03a110f0: [Jack] Mic at Ext Left
Pin Default 0x90a601f0: [Fixed] Mic at Int N/A
Please see attached file:
cat /proc/asound/card0/codec\#0 >| proc.asound.card0.codec\#0-2.6.35-ideapad
2.6.35 snd-hda-intel (broken)
=============================
└[a8@t4]-~ cat /proc/asound/devices 2: : timer 3: : sequencer
4: [ 0- 1]: digital audio playback
5: [ 0- 0]: digital audio playback
6: [ 0- 0]: digital audio capture
7: [ 0- 0]: hardware dependent
8: [ 0] : control
9: [29] : control
mixer devices (alsamixer)
Master PCM Mic B Mic C Mic E Mic F S/PDIF "S/PDIF Default PCM" Capture "Analog Mic Boost"
└[a8@t4]-~ cat /proc/asound/card0/codec\#0|grep -i mic
Pin Default 0x61a190f0: [N/A] Mic at Sep Rear Pin Default 0x03a110f0: [Jack] Mic at Ext Left Pin Default 0x90a601f0: [Fixed] Mic at Int N/A
Please see attached file:
cat /proc/asound/card0/codec\#0 >| proc.asound.card0.codec\#0-2.6.35-broken
2.6.32 snd-hda-intel (works)
============================
└[a8@t4]-~ cat /proc/asound/devices 2: : timer 3: : sequencer 4: [29] : control
5: [ 0- 0]: digital audio playback
6: [ 0- 0]: digital audio capture
7: [ 0- 0]: hardware dependent
8: [ 0] : control
mixer devices (alsamixer)
Master PCM Mic "Mic 1"
└[a8@t4]-~ cat /proc/asound/card0/codec\#0|grep -i mic
Pin Default 0x61a190f0: [N/A] Mic at Sep Rear Pin Default 0x03a110f0: [Jack] Mic at Ext Left Pin Default 0x90a601f0: [Fixed] Mic at Int N/A
Please see attached file:
cat /proc/asound/card0/codec\#0 >| proc.asound.card0.codec\#0-2.6.35-ideapad
Bye,
Frank
Signature · 4 lines
Frank Becker <[email protected]> (jabber|mail) | http://twitter.com/41i3n8 GnuPG: 0xADC29ECD | F01B 5E9C 1D09 981B 5B40 50D3 C80F 7459 ADC2 9ECD SILC-Net: a8 | Home: http://www.alien8.de | <<</>> http://www.c3d2.de "> Freedom is just chaos, with better lighting. <" Alan Dean Foster
Codec: Conexant ID 5069
Address: 0
Function Id: 0x1
Vendor Id: 0x14f15069
Subsystem Id: 0x17aa2132
Revision Id: 0x100300
No Modem Function Group found
Default PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCMDefault Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x49 0x46]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x3c 0x3c]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power: setting=D0, actual=D0
Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3 Power: setting=D0, actual=D0
Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0 Amp-Out vals: [0x00]
Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x06 0x06] [0x80 0x80] [0x48 0x48] [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Connection: 4
0x17 0x18 0x23* 0x24Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04]
Power: setting=D0, actual=D0
Connection: 4
0x1a 0x1b* 0x1d 0x1e
Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00]
Power: setting=D0, actual=D0
Connection: 4
0x1a* 0x1b 0x1d 0x1e
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x032110f0: [Jack] HP Out at Ext Left
Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1a [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00001324: IN Detect
Vref caps: HIZ 50 80
Pin Default 0x61a190f0: [N/A] Mic at Sep Rear
Conn = 1/8, Color = Pink
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00011334: IN OUT EAPD Detect
Vref caps: HIZ 50 80
EAPD 0x2: EAPD
Pin Default 0x03a110f0: [Jack] Mic at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1c [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x612140f0: [N/A] HP Out at Sep Rear
Conn = 1/8, Color = Green DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1d [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1e [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00000024: IN Detect
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Node 0x1f [Pin Complex] wcaps 0x400501: Stereo
Pincap 0x00000010: OUT
Pin Default 0x901701f0: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3 Power: setting=D0, actual=D0
Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x21
Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0 Amp-In vals: [0x04 0x04]
Pincap 0x00000020: IN
Pin Default 0x90a601f0: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power: setting=D0, actual=D0
Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11
Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono
Codec: Conexant CX20585
Address: 0
Function Id: 0x1
Vendor Id: 0x14f15069
Subsystem Id: 0x17aa2132
Revision Id: 0x100300
No Modem Function Group found
Default PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCMDefault Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Control: name="Master Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="CONEXANT Analog", type="Audio", device=0
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x49 0x46]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x3c 0x3c]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0 Amp-Out vals: [0x00]
Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Device: name="CONEXANT Analog", type="Audio", device=0 Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4f 0x4f] [0x80 0x80] [0x4f 0x4f] [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17 0x18 0x23* 0x24Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x02 0x02]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a 0x1b* 0x1d 0x1e
Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a* 0x1b 0x1d 0x1e
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x032110f0: [Jack] HP Out at Ext Left
Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1a [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00001324: IN Detect
Vref caps: HIZ 50 80
Pin Default 0x61a190f0: [N/A] Mic at Sep Rear
Conn = 1/8, Color = Pink
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00011334: IN OUT EAPD Detect
Vref caps: HIZ 50 80
EAPD 0x2: EAPD
Pin Default 0x03a110f0: [Jack] Mic at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1c [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x612140f0: [N/A] HP Out at Sep Rear
Conn = 1/8, Color = Green DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1d [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1e [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00000024: IN Detect
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1f [Pin Complex] wcaps 0x400501: Stereo
Pincap 0x00000010: OUT
Pin Default 0x901701f0: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
Device: name="Conexant Digital", type="SPDIF", device=1
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x21
Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0 Amp-In vals: [0x02 0x02]
Pincap 0x00000020: IN
Pin Default 0x90a601f0: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11
Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono
Codec: Conexant CX20585
Address: 0
Function Id: 0x1
Vendor Id: 0x14f15069
Subsystem Id: 0x17aa2132
Revision Id: 0x100300
No Modem Function Group found
Default PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCMDefault Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Control: name="Master Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="CONEXANT Analog", type="Audio", device=0
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x49 0x46]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x3c 0x3c]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0 Amp-Out vals: [0x00]
Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Device: name="CONEXANT Analog", type="Audio", device=0 Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4f 0x4f] [0x80 0x80] [0x4f 0x4f] [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17 0x18 0x23* 0x24Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x02 0x02]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a 0x1b* 0x1d 0x1e
Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a* 0x1b 0x1d 0x1e
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x032110f0: [Jack] HP Out at Ext Left
Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=37, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1a [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00001324: IN Detect
Vref caps: HIZ 50 80
Pin Default 0x61a190f0: [N/A] Mic at Sep Rear
Conn = 1/8, Color = Pink
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00011334: IN OUT EAPD Detect
Vref caps: HIZ 50 80
EAPD 0x2: EAPD
Pin Default 0x03a110f0: [Jack] Mic at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=38, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1c [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x612140f0: [N/A] HP Out at Sep Rear
Conn = 1/8, Color = Green DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1d [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1e [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00000024: IN Detect
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1f [Pin Complex] wcaps 0x400501: Stereo
Pincap 0x00000010: OUT
Pin Default 0x901701f0: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x21
Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0 Amp-In vals: [0x02 0x02]
Pincap 0x00000020: IN
Pin Default 0x90a601f0: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11
Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono
_______________________________________________
Alsa-devel mailing list
[email protected]
http://mailman.alsa-project.org/mailman/listinfo/alsa-devel
Jens Taprogge [2010-09-07, 01:18 +0200]:
Quoted 1 line · Frank Becker
Hi,
Quoted 7 lines
Quoted 7 lines
I have a problem since commit id 7b2bfdb (about 2.6.35-rc2) up to the latest HEAD on my Lenovo T400s laptop. Just found out while testing Ubuntu 10.10.
Problem is: Headphones don't work any more, internal Microphone doesn't work any more. However, if I load snd-hda-intel with the option model=ideapad the mic and the headphones work perfectly well again. For now
[...]
Quoted 2 lines
apparently the devices are wired differently on the T410s (which works here) and the T400s.
Sure. As far as I understand Lenovo is not putting any kind of effort into Linux support. It's hard to test without hardware.
Quoted 1 line
Have you tried playing with the mixers?
Sure, I tried everything I could think of. In the process I found out that I have to power off my machine. Otherwise the mic was not working sometimes after just rebooting from a non working revision into a usually working one.
Quoted 2 lines
There might be additional ones
present after the patch.
Indeed there are. Not to clutter up the mail I put this to the end of this message.
Quoted 3 lines
Also when you say things work perfectly when specifying "model=ideapad", does that include automatic switching between internal and external microphones? Have you attached your T410 to a docking station?
I don't have a docking station for my T400s. Sorry, cannot test that.
The headphone jack also has a mic in connector (TRRS connector). There the mic works fine. That has nothing to do with the docking station though.
The cluttered details:
2.6.35 snd-hda-intel model="ideapad" (works)
============================================
└[a8@t4]-~ cat /proc/asound/devices 2: : timer 3: : sequencer 4: [29] : control
5: [ 0- 0]: digital audio playback
6: [ 0- 0]: digital audio capture
7: [ 0- 0]: hardware dependent
8: [ 0] : control
mixer devices (alsamixer)
Master PCM Capture "Analog Mic Boost"
└[a8@t4]-~ cat /proc/asound/card0/codec\#0|grep -i mic
Pin Default 0x61a190f0: [N/A] Mic at Sep Rear
Pin Default 0x03a110f0: [Jack] Mic at Ext Left
Pin Default 0x90a601f0: [Fixed] Mic at Int N/A
Please see attached file:
cat /proc/asound/card0/codec\#0 >| proc.asound.card0.codec\#0-2.6.35-ideapad
2.6.35 snd-hda-intel (broken)
=============================
└[a8@t4]-~ cat /proc/asound/devices 2: : timer 3: : sequencer
4: [ 0- 1]: digital audio playback
5: [ 0- 0]: digital audio playback
6: [ 0- 0]: digital audio capture
7: [ 0- 0]: hardware dependent
8: [ 0] : control
9: [29] : control
mixer devices (alsamixer)
Master PCM Mic B Mic C Mic E Mic F S/PDIF "S/PDIF Default PCM" Capture "Analog Mic Boost"
└[a8@t4]-~ cat /proc/asound/card0/codec\#0|grep -i mic
Pin Default 0x61a190f0: [N/A] Mic at Sep Rear Pin Default 0x03a110f0: [Jack] Mic at Ext Left Pin Default 0x90a601f0: [Fixed] Mic at Int N/A
Please see attached file:
cat /proc/asound/card0/codec\#0 >| proc.asound.card0.codec\#0-2.6.35-broken
2.6.32 snd-hda-intel (works)
============================
└[a8@t4]-~ cat /proc/asound/devices 2: : timer 3: : sequencer 4: [29] : control
5: [ 0- 0]: digital audio playback
6: [ 0- 0]: digital audio capture
7: [ 0- 0]: hardware dependent
8: [ 0] : control
mixer devices (alsamixer)
Master PCM Mic "Mic 1"
└[a8@t4]-~ cat /proc/asound/card0/codec\#0|grep -i mic
Pin Default 0x61a190f0: [N/A] Mic at Sep Rear Pin Default 0x03a110f0: [Jack] Mic at Ext Left Pin Default 0x90a601f0: [Fixed] Mic at Int N/A
Please see attached file:
cat /proc/asound/card0/codec\#0 >| proc.asound.card0.codec\#0-2.6.35-ideapad
Bye,
Frank
Signature · 4 lines
Frank Becker <[email protected]> (jabber|mail) | http://twitter.com/41i3n8 GnuPG: 0xADC29ECD | F01B 5E9C 1D09 981B 5B40 50D3 C80F 7459 ADC2 9ECD SILC-Net: a8 | Home: http://www.alien8.de | <<</>> http://www.c3d2.de "> Freedom is just chaos, with better lighting. <" Alan Dean Foster
Codec: Conexant ID 5069
Address: 0
Function Id: 0x1
Vendor Id: 0x14f15069
Subsystem Id: 0x17aa2132
Revision Id: 0x100300
No Modem Function Group found
Default PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCMDefault Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x49 0x46]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x3c 0x3c]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power: setting=D0, actual=D0
Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3 Power: setting=D0, actual=D0
Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0 Amp-Out vals: [0x00]
Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x06 0x06] [0x80 0x80] [0x48 0x48] [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Connection: 4
0x17 0x18 0x23* 0x24Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x04 0x04]
Power: setting=D0, actual=D0
Connection: 4
0x1a 0x1b* 0x1d 0x1e
Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00]
Power: setting=D0, actual=D0
Connection: 4
0x1a* 0x1b 0x1d 0x1e
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x032110f0: [Jack] HP Out at Ext Left
Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1a [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00001324: IN Detect
Vref caps: HIZ 50 80
Pin Default 0x61a190f0: [N/A] Mic at Sep Rear
Conn = 1/8, Color = Pink
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00011334: IN OUT EAPD Detect
Vref caps: HIZ 50 80
EAPD 0x2: EAPD
Pin Default 0x03a110f0: [Jack] Mic at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1c [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x612140f0: [N/A] HP Out at Sep Rear
Conn = 1/8, Color = Green DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1d [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1e [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00000024: IN Detect
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Node 0x1f [Pin Complex] wcaps 0x400501: Stereo
Pincap 0x00000010: OUT
Pin Default 0x901701f0: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3 Power: setting=D0, actual=D0
Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power: setting=D0, actual=D0
Connection: 1
0x21
Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0 Amp-In vals: [0x04 0x04]
Pincap 0x00000020: IN
Pin Default 0x90a601f0: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power: setting=D0, actual=D0
Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11
Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono
Codec: Conexant CX20585
Address: 0
Function Id: 0x1
Vendor Id: 0x14f15069
Subsystem Id: 0x17aa2132
Revision Id: 0x100300
No Modem Function Group found
Default PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCMDefault Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Control: name="Master Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="CONEXANT Analog", type="Audio", device=0
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x49 0x46]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x3c 0x3c]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0 Amp-Out vals: [0x00]
Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Device: name="CONEXANT Analog", type="Audio", device=0 Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4f 0x4f] [0x80 0x80] [0x4f 0x4f] [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17 0x18 0x23* 0x24Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x02 0x02]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a 0x1b* 0x1d 0x1e
Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a* 0x1b 0x1d 0x1e
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x032110f0: [Jack] HP Out at Ext Left
Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1a [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00001324: IN Detect
Vref caps: HIZ 50 80
Pin Default 0x61a190f0: [N/A] Mic at Sep Rear
Conn = 1/8, Color = Pink
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00011334: IN OUT EAPD Detect
Vref caps: HIZ 50 80
EAPD 0x2: EAPD
Pin Default 0x03a110f0: [Jack] Mic at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1c [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x612140f0: [N/A] HP Out at Sep Rear
Conn = 1/8, Color = Green DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1d [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1e [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00000024: IN Detect
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1f [Pin Complex] wcaps 0x400501: Stereo
Pincap 0x00000010: OUT
Pin Default 0x901701f0: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="IEC958 Default PCM Playback Switch", index=0, device=0
Device: name="Conexant Digital", type="SPDIF", device=1
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x21
Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0 Amp-In vals: [0x02 0x02]
Pincap 0x00000020: IN
Pin Default 0x90a601f0: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11
Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono
Codec: Conexant CX20585
Address: 0
Function Id: 0x1
Vendor Id: 0x14f15069
Subsystem Id: 0x17aa2132
Revision Id: 0x100300
No Modem Function Group found
Default PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCMDefault Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0 IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x10 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Control: name="Master Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="CONEXANT Analog", type="Audio", device=0
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1
Amp-Out vals: [0x49 0x46]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x11 [Audio Output] wcaps 0xc1d: Stereo Amp-Out R/L
Amp-Out caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-Out vals: [0x3c 0x3c]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x12 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x13 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x07, nsteps=0x07, stepsize=0x0f, mute=0 Amp-Out vals: [0x00]
Node 0x14 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Device: name="CONEXANT Analog", type="Audio", device=0 Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4f 0x4f] [0x80 0x80] [0x4f 0x4f] [0x80 0x80]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17 0x18 0x23* 0x24Node 0x15 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24Node 0x16 [Audio Input] wcaps 0x100d1b: Stereo Amp-In R/L
Amp-In caps: ofs=0x4a, nsteps=0x50, stepsize=0x03, mute=1 Amp-In vals: [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a] [0x4a 0x4a]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x17* 0x18 0x23 0x24Node 0x17 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x02 0x02]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a 0x1b* 0x1d 0x1e
Node 0x18 [Audio Selector] wcaps 0x30050d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0 Amp-Out vals: [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 4
0x1a* 0x1b 0x1d 0x1e
Node 0x19 [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x0000001c: OUT HP Detect
Pin Default 0x032110f0: [Jack] HP Out at Ext Left
Conn = 1/8, Color = Black DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=37, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1a [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00001324: IN Detect
Vref caps: HIZ 50 80
Pin Default 0x61a190f0: [N/A] Mic at Sep Rear
Conn = 1/8, Color = Pink
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1b [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00011334: IN OUT EAPD Detect
Vref caps: HIZ 50 80
EAPD 0x2: EAPD
Pin Default 0x03a110f0: [Jack] Mic at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=38, enabled=1
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1c [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00000014: OUT Detect
Pin Default 0x612140f0: [N/A] HP Out at Sep Rear
Conn = 1/8, Color = Green DefAssociation = 0xf, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1d [Pin Complex] wcaps 0x400581: Stereo
Pincap 0x00010034: IN OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x1e [Pin Complex] wcaps 0x400481: Stereo
Pincap 0x00000024: IN Detect
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x1f [Pin Complex] wcaps 0x400501: Stereo
Pincap 0x00000010: OUT
Pin Default 0x901701f0: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown DefAssociation = 0xf, Sequence = 0x0 Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10* 0x11
Node 0x20 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x21 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x160]: 44100 48000 96000
bits [0xe]: 16 20 24
formats [0x5]: PCM AC3 Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x22 [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x40f001f0: [N/A] Other at Ext N/A
Conn = Unknown, Color = Unknown DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 1
0x21
Node 0x23 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x04, stepsize=0x2f, mute=0 Amp-In vals: [0x02 0x02]
Pincap 0x00000020: IN
Pin Default 0x90a601f0: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Node 0x24 [Audio Mixer] wcaps 0x20050b: Stereo Amp-In
Amp-In caps: ofs=0x4a, nsteps=0x4a, stepsize=0x03, mute=1 Amp-In vals: [0x00 0x00] [0x00 0x00]
Power states: D0 D1 D2 D3 D3cold
Power: setting=D0, actual=D0
Connection: 2
0x10 0x11
Node 0x25 [Vendor Defined Widget] wcaps 0xf00000: Mono