Skip to contentSkip to conversation

xconfig build error in linux-next??

DISCUSSION Randy Dunlap 3 participants 5 messages Sep 9, 2010 – Sep 10, 2010

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Hi,

Beginning with linux-next of 20100902 (and later), I cannot build/use xconfig.

I see this after doing:

Quoted 4 lines

mkdir xx64
make ARCH=x86_64 O=xx64 defconfig

make V=1 ARCH=x86_64 O=xx64 xconfig &

make -C /lnx/src/TMP/linux-next-20100902/xx64 \
	KBUILD_SRC=/lnx/src/TMP/linux-next-20100902 \
	KBUILD_EXTMOD="" -f /lnx/src/TMP/linux-next-20100902/Makefile \
	xconfig
make -f /lnx/src/TMP/linux-next-20100902/scripts/Makefile.build obj=scripts/basic
rm -f .tmp_quiet_recordmcount
ln -fsn /lnx/src/TMP/linux-next-20100902 source
/bin/sh /lnx/src/TMP/linux-next-20100902/scripts/mkmakefile \
	    /lnx/src/TMP/linux-next-20100902 /lnx/src/TMP/linux-next-20100902/xx64 2 6

GEN /lnx/src/TMP/linux-next-20100902/xx64/Makefile
mkdir -p include/linux include/config
make -f /lnx/src/TMP/linux-next-20100902/scripts/Makefile.build obj=scripts/kconfig xconfig **Unknown**/moc -i /lnx/src/TMP/linux-next-20100902/scripts/kconfig/qconf.h -o scripts/kconfig/qconf.moc /bin/sh: **Unknown**/moc: No such file or directory
make[2]: *** [scripts/kconfig/qconf.moc] Error 127
make[1]: *** [xconfig] Error 2
make: *** [sub-make] Error 2

Any ideas what happened?

thanks,
---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

#1 lore raw
Quoted 30 lines · On Thu, 9 Sep 2010 16:21:22 -0700 Randy Dunlap wrote:

Hi,

Beginning with linux-next of 20100902 (and later), I cannot build/use xconfig.

I see this after doing:

Quoted 4 lines

mkdir xx64
make ARCH=x86_64 O=xx64 defconfig

make V=1 ARCH=x86_64 O=xx64 xconfig &

make -C /lnx/src/TMP/linux-next-20100902/xx64 \
	KBUILD_SRC=/lnx/src/TMP/linux-next-20100902 \
	KBUILD_EXTMOD="" -f /lnx/src/TMP/linux-next-20100902/Makefile \
	xconfig
make -f /lnx/src/TMP/linux-next-20100902/scripts/Makefile.build obj=scripts/basic
rm -f .tmp_quiet_recordmcount
ln -fsn /lnx/src/TMP/linux-next-20100902 source
/bin/sh /lnx/src/TMP/linux-next-20100902/scripts/mkmakefile \
	    /lnx/src/TMP/linux-next-20100902 /lnx/src/TMP/linux-next-20100902/xx64 2 6

GEN /lnx/src/TMP/linux-next-20100902/xx64/Makefile
mkdir -p include/linux include/config
make -f /lnx/src/TMP/linux-next-20100902/scripts/Makefile.build obj=scripts/kconfig xconfig **Unknown**/moc -i /lnx/src/TMP/linux-next-20100902/scripts/kconfig/qconf.h -o scripts/kconfig/qconf.moc /bin/sh: **Unknown**/moc: No such file or directory
make[2]: *** [scripts/kconfig/qconf.moc] Error 127
make[1]: *** [xconfig] Error 2
make: *** [sub-make] Error 2

Quoted 1 line

Any ideas what happened?

OK, if I revert the determine-qt3-qt4 stuff, it builds/runs OK.

This is what I reverted:

scripts/kconfig/Makefile +45 -37
diff -u b/scripts/kconfig/Makefile b/scripts/kconfig/Makefile
@@ -145,10 +145,8 @@
 
 # Use recursively expanded variables so we do not call gcc unless
 # we really need to do so. (Do not call gcc as part of make mrproper)
-HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
-
-HOST_EXTRACFLAGS += -DLOCALE
-
+HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \
+                    -DLOCALE
 
 # ===========================================================================
 # Shared Makefile for the various kconfig executables:
@@ -237,40 +235,50 @@
 # QT needs some extra effort...
 $(obj)/.tmp_qtcheck:
 	@set -e; echo "  CHECK   qt"; dir=""; pkg=""; \
-	pkg-config --exists qt 2> /dev/null && pkg=qt; \
-	pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \
-	if [ -n "$$pkg" ]; then \
-	  cflags="\$$(shell pkg-config $$pkg --cflags)"; \
-	  libs="\$$(shell pkg-config $$pkg --libs)"; \
-	  moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \
-	  dir="$$(pkg-config $$pkg --variable=prefix)"; \
+	if ! pkg-config --exists QtCore 2> /dev/null; then \
+	    echo "* Unable to find the QT4 tool qmake. Trying to use QT3"; \
+	    pkg-config --exists qt 2> /dev/null && pkg=qt; \
+	    pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \
+	    if [ -n "$$pkg" ]; then \
+	      cflags="\$$(shell pkg-config $$pkg --cflags)"; \
+	      libs="\$$(shell pkg-config $$pkg --libs)"; \
+	      moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \
+	      dir="$$(pkg-config $$pkg --variable=prefix)"; \
+	    else \
+	      for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \
+	        if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
+	      done; \
+	      if [ -z "$$dir" ]; then \
+	        echo "*"; \
+	        echo "* Unable to find any QT installation. Please make sure that"; \
+	        echo "* the QT4 or QT3 development package is correctly installed and"; \
+	        echo "* either qmake can be found or install pkg-config or set"; \
+	        echo "* the QTDIR environment variable to the correct location."; \
+	        echo "*"; \
+	        false; \
+	      fi; \
+	      libpath=$$dir/lib; lib=qt; osdir=""; \
+	      $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \
+	        osdir=x$$($(HOSTCXX) -print-multi-os-directory); \
+	      test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \
+	      test -f $$libpath/libqt-mt.so && lib=qt-mt; \
+	      cflags="-I$$dir/include"; \
+	      libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \
+	      moc="$$dir/bin/moc"; \
+	    fi; \
+	    if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \
+	      echo "*"; \
+	      echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \
+	      echo "*"; \
+	      moc="/usr/bin/moc"; \
+	    fi; \
 	else \
-	  for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \
-	    if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
-	  done; \
-	  if [ -z "$$dir" ]; then \
-	    echo "*"; \
-	    echo "* Unable to find the QT3 installation. Please make sure that"; \
-	    echo "* the QT3 development package is correctly installed and"; \
-	    echo "* either install pkg-config or set the QTDIR environment"; \
-	    echo "* variable to the correct location."; \
-	    echo "*"; \
-	    false; \
-	  fi; \
-	  libpath=$$dir/lib; lib=qt; osdir=""; \
-	  $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \
-	    osdir=x$$($(HOSTCXX) -print-multi-os-directory); \
-	  test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \
-	  test -f $$libpath/libqt-mt.so && lib=qt-mt; \
-	  cflags="-I$$dir/include"; \
-	  libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \
-	  moc="$$dir/bin/moc"; \
-	fi; \
-	if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \
-	  echo "*"; \
-	  echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \
-	  echo "*"; \
-	  moc="/usr/bin/moc"; \
+	  headerpath="\$$(shell qmake -query QT_INSTALL_HEADERS)"; \
+	  libpath="\$$(shell qmake -query QT_INSTALL_LIBS)"; \
+	  binpath="\$$(shell qmake -query QT_INSTALL_BINS)"; \
+	  cflags="-I$$headerpath -I$$headerpath/QtCore -I$$headerpath/QtGui -I$$headerpath/Qt3Support -DQT3_SUPPORT"; \
+	  libs="-L$$libpath -Wl,-rpath,$$libpath -lQtCore -lQtGui -lQt3Support"; \
+	  moc="$$binpath/moc"; \
 	fi; \
 	echo "KC_QT_CFLAGS=$$cflags" > $@; \
 	echo "KC_QT_LIBS=$$libs" >> $@; \

---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***

#2 lore raw

(added Alexander to CC)

Quoted 141 lines · Randy Dunlap
Quoted 30 lines · On Thu, 9 Sep 2010 16:21:22 -0700 Randy Dunlap wrote:

Hi,

Beginning with linux-next of 20100902 (and later), I cannot build/use xconfig.

I see this after doing:

Quoted 4 lines

mkdir xx64
make ARCH=x86_64 O=xx64 defconfig

make V=1 ARCH=x86_64 O=xx64 xconfig &

make -C /lnx/src/TMP/linux-next-20100902/xx64 \
	KBUILD_SRC=/lnx/src/TMP/linux-next-20100902 \
	KBUILD_EXTMOD="" -f /lnx/src/TMP/linux-next-20100902/Makefile \
	xconfig
make -f /lnx/src/TMP/linux-next-20100902/scripts/Makefile.build obj=scripts/basic
rm -f .tmp_quiet_recordmcount
ln -fsn /lnx/src/TMP/linux-next-20100902 source
/bin/sh /lnx/src/TMP/linux-next-20100902/scripts/mkmakefile \
	    /lnx/src/TMP/linux-next-20100902 /lnx/src/TMP/linux-next-20100902/xx64 2 6

GEN /lnx/src/TMP/linux-next-20100902/xx64/Makefile
mkdir -p include/linux include/config
make -f /lnx/src/TMP/linux-next-20100902/scripts/Makefile.build obj=scripts/kconfig xconfig **Unknown**/moc -i /lnx/src/TMP/linux-next-20100902/scripts/kconfig/qconf.h -o scripts/kconfig/qconf.moc /bin/sh: **Unknown**/moc: No such file or directory
make[2]: *** [scripts/kconfig/qconf.moc] Error 127
make[1]: *** [xconfig] Error 2
make: *** [sub-make] Error 2

Quoted 1 line

Any ideas what happened?

OK, if I revert the determine-qt3-qt4 stuff, it builds/runs OK.

This is what I reverted:

diff -u b/scripts/kconfig/Makefile b/scripts/kconfig/Makefile

scripts/kconfig/Makefile +45 -37
@@ -145,10 +145,8 @@
 
 # Use recursively expanded variables so we do not call gcc unless
 # we really need to do so. (Do not call gcc as part of make mrproper)
-HOST_EXTRACFLAGS = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags)
-
-HOST_EXTRACFLAGS += -DLOCALE
-
+HOST_EXTRACFLAGS += $(shell $(CONFIG_SHELL) $(check-lxdialog) -ccflags) \
+                    -DLOCALE
 
 # ===========================================================================
 # Shared Makefile for the various kconfig executables:
@@ -237,40 +235,50 @@
 # QT needs some extra effort...
 $(obj)/.tmp_qtcheck:
 	@set -e; echo "  CHECK   qt"; dir=""; pkg=""; \
-	pkg-config --exists qt 2> /dev/null && pkg=qt; \
-	pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \
-	if [ -n "$$pkg" ]; then \
-	  cflags="\$$(shell pkg-config $$pkg --cflags)"; \
-	  libs="\$$(shell pkg-config $$pkg --libs)"; \
-	  moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \
-	  dir="$$(pkg-config $$pkg --variable=prefix)"; \
+	if ! pkg-config --exists QtCore 2> /dev/null; then \
+	    echo "* Unable to find the QT4 tool qmake. Trying to use QT3"; \
+	    pkg-config --exists qt 2> /dev/null && pkg=qt; \
+	    pkg-config --exists qt-mt 2> /dev/null && pkg=qt-mt; \
+	    if [ -n "$$pkg" ]; then \
+	      cflags="\$$(shell pkg-config $$pkg --cflags)"; \
+	      libs="\$$(shell pkg-config $$pkg --libs)"; \
+	      moc="\$$(shell pkg-config $$pkg --variable=prefix)/bin/moc"; \
+	      dir="$$(pkg-config $$pkg --variable=prefix)"; \
+	    else \
+	      for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \
+	        if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
+	      done; \
+	      if [ -z "$$dir" ]; then \
+	        echo "*"; \
+	        echo "* Unable to find any QT installation. Please make sure that"; \
+	        echo "* the QT4 or QT3 development package is correctly installed and"; \
+	        echo "* either qmake can be found or install pkg-config or set"; \
+	        echo "* the QTDIR environment variable to the correct location."; \
+	        echo "*"; \
+	        false; \
+	      fi; \
+	      libpath=$$dir/lib; lib=qt; osdir=""; \
+	      $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \
+	        osdir=x$$($(HOSTCXX) -print-multi-os-directory); \
+	      test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \
+	      test -f $$libpath/libqt-mt.so && lib=qt-mt; \
+	      cflags="-I$$dir/include"; \
+	      libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \
+	      moc="$$dir/bin/moc"; \
+	    fi; \
+	    if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \
+	      echo "*"; \
+	      echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \
+	      echo "*"; \
+	      moc="/usr/bin/moc"; \
+	    fi; \
 	else \
-	  for d in $$QTDIR /usr/share/qt* /usr/lib/qt*; do \
-	    if [ -f $$d/include/qconfig.h ]; then dir=$$d; break; fi; \
-	  done; \
-	  if [ -z "$$dir" ]; then \
-	    echo "*"; \
-	    echo "* Unable to find the QT3 installation. Please make sure that"; \
-	    echo "* the QT3 development package is correctly installed and"; \
-	    echo "* either install pkg-config or set the QTDIR environment"; \
-	    echo "* variable to the correct location."; \
-	    echo "*"; \
-	    false; \
-	  fi; \
-	  libpath=$$dir/lib; lib=qt; osdir=""; \
-	  $(HOSTCXX) -print-multi-os-directory > /dev/null 2>&1 && \
-	    osdir=x$$($(HOSTCXX) -print-multi-os-directory); \
-	  test -d $$libpath/$$osdir && libpath=$$libpath/$$osdir; \
-	  test -f $$libpath/libqt-mt.so && lib=qt-mt; \
-	  cflags="-I$$dir/include"; \
-	  libs="-L$$libpath -Wl,-rpath,$$libpath -l$$lib"; \
-	  moc="$$dir/bin/moc"; \
-	fi; \
-	if [ ! -x $$dir/bin/moc -a -x /usr/bin/moc ]; then \
-	  echo "*"; \
-	  echo "* Unable to find $$dir/bin/moc, using /usr/bin/moc instead."; \
-	  echo "*"; \
-	  moc="/usr/bin/moc"; \
+	  headerpath="\$$(shell qmake -query QT_INSTALL_HEADERS)"; \
+	  libpath="\$$(shell qmake -query QT_INSTALL_LIBS)"; \
+	  binpath="\$$(shell qmake -query QT_INSTALL_BINS)"; \
+	  cflags="-I$$headerpath -I$$headerpath/QtCore -I$$headerpath/QtGui -I$$headerpath/Qt3Support -DQT3_SUPPORT"; \
+	  libs="-L$$libpath -Wl,-rpath,$$libpath -lQtCore -lQtGui -lQt3Support"; \
+	  moc="$$binpath/moc"; \
 	fi; \
 	echo "KC_QT_CFLAGS=$$cflags" > $@; \
 	echo "KC_QT_LIBS=$$libs" >> $@; \
#3 lore raw

Hello Randy,

Quoted 13 lines · On Friday 10 September 2010 16:37:36 Michal Marek wrote:
Quoted 13 lines
Quoted 13 lines

GEN /lnx/src/TMP/linux-next-20100902/xx64/Makefile

mkdir -p include/linux include/config
make -f /lnx/src/TMP/linux-next-20100902/scripts/Makefile.build obj=scripts/kconfig xconfig **Unknown**/moc -i /lnx/src/TMP/linux-next-20100902/scripts/kconfig/qconf.h -o scripts/kconfig/qconf.moc /bin/sh: **Unknown**/moc: No such file or directory
make[2]: *** [scripts/kconfig/qconf.moc] Error 127 make[1]: *** [xconfig] Error 2
make: *** [sub-make] Error 2

Quoted 1 line
Quoted 1 line
Quoted 1 line

Any ideas what happened?

It seems QT4 isn't detected properly. Could you please check the output of

Quoted 3 lines

qmake -query QT_INSTALL_BINS
qmake -query QT_INSTALL_LIBS
qmake -query QT_INSTALL_HEADERS

I also have several other questions:
* Which distribution are you running?
* Where is qmake and moc installed on your system?

Best regards,
Alexander

#4 lore raw
Quoted 16 lines · On Fri, 10 Sep 2010 17:14:16 +0200 Alexander Stein wrote:

Hello Randy,

Quoted 13 lines · On Friday 10 September 2010 16:37:36 Michal Marek wrote:
Quoted 13 lines
Quoted 13 lines

GEN /lnx/src/TMP/linux-next-20100902/xx64/Makefile

mkdir -p include/linux include/config
make -f /lnx/src/TMP/linux-next-20100902/scripts/Makefile.build obj=scripts/kconfig xconfig **Unknown**/moc -i /lnx/src/TMP/linux-next-20100902/scripts/kconfig/qconf.h -o scripts/kconfig/qconf.moc /bin/sh: **Unknown**/moc: No such file or directory
make[2]: *** [scripts/kconfig/qconf.moc] Error 127 make[1]: *** [xconfig] Error 2
make: *** [sub-make] Error 2

Quoted 4 lines
Quoted 1 line
Quoted 1 line
Quoted 1 line

Any ideas what happened?

It seems QT4 isn't detected properly. Could you please check the output of

Quoted 1 line

qmake -query QT_INSTALL_BINS

**Unknown**

Quoted 1 line
Quoted 1 line

qmake -query QT_INSTALL_LIBS

**Unknown**

Quoted 1 line
Quoted 1 line

qmake -query QT_INSTALL_HEADERS

**Unknown**

Quoted 2 lines

I also have several other questions:
* Which distribution are you running?

fedora 11

Quoted 1 line

* Where is qmake and moc installed on your system?

/usr/lib64/qt-3.3/bin/qmake
/usr/lib64/qt-3.3/bin/moc

Thanks.

---
~Randy
*** Remember to use Documentation/SubmitChecklist when testing your code ***