Skip to contentSkip to conversation

MTD: mtd_blkdevs regression

DISCUSSION Jarkko Lavinen 1 participant 1 message Sep 10, 2010

lore
Share & tools
lore
#0 lore raw

In 2.6.34 modules using add_mtd_blktrans_dev() have reference count 0 after loading and I can remove the module if it is not being used.

In 2.6.34, using mtdblock as an example:

    # modprobe nandsim
    # modprobe mtdblock
    # lsmod 
    Module                  Size  Used by
    mtdblock                2829  0 
    mtd_blkdevs             4217  1 mtdblock
    nandsim                25811  0 
    nand                   27184  1 nandsim
    nand_ids                2666  2 nandsim,nand
    nand_ecc                3392  1 nand
    mtd                    14794  5 mtd_blkdevs,nandsim,nand
    # rmmod mtdblock
    # 

Since commit 048d871 (mtd: blktrans: Hotplug fixes) in 2.6.35-rc1 add_mtd_blktrans_dev() uses __get_module(tr->owner) to add reference count to calling module.

Because of this the module cannot be removed and since module exit cannot be called, del_mtd_blktrans_dev() will not be called, which would do the module_put().

In 2.6.35:

    # modprobe nandsim
    # modprobe mtdblock
    # lsmod
    Module                  Size  Used by
    mtdblock                2721  1 
    mtd_blkdevs             4895  1 mtdblock
    nandsim                25819  1 
    nand                   28326  1 nandsim
    nand_ids                2698  2 nandsim,nand
    nand_ecc                3400  1 nand
    mtd                    15352  5 mtd_blkdevs,nandsim,nand
    # rmmod mtdblock
    ERROR: Module mtdblock is in use
    #

Jarkko Lavinen