hwmon: (w83795) Add const markers
Subsystems (2)
PATCH 12/36 hwmon: (w83795) Add const markers
Attribute structures can be made const. Same for the I2C address list.
Signed-off-by Jean Delvare <[email protected]>
--- drivers/hwmon/w83795.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-)
drivers/hwmon/w83795.c +10 -8
@@ -36,7 +36,9 @@#include <linux/delay.h> /* Addresses to scan */ -static unsigned short normal_i2c[] = {0x2c ,0x2d ,0x2e ,0x2f ,I2C_CLIENT_END }; +static const unsigned short normal_i2c[] = { +0x2c ,0x2d ,0x2e ,0x2f ,I2C_CLIENT_END +};static int reset;
@@ -70,7 +72,7 @@ MODULE_PARM_DESC(reset, "Set to 1 to res#define TEMP_CTRL_SHIFT 4#define TEMP_CTRL_HASIN_SHIFT 5/* temp mode may effect VSEN17-12 (in20-15) */ -static u16 W83795_REG_TEMP_CTRL [][6 ] = { +static const u16 W83795_REG_TEMP_CTRL [][6 ] = {/* Disable, TD, VSEN, TR, register shift value, has_in shift num */ {0x00 ,0x01 ,0x02 ,0x03 ,0 ,17 },/* TR1 */ {0x00 ,0x04 ,0x08 ,0x0C ,2 ,18 },/* TR2 */
@@ -87,7 +89,7 @@ static u16 W83795_REG_TEMP_CTRL[][6] = {#define TEMP_WARN_HYST 4/* only crit and crit_hyst affect real-time alarm status * current crit crit_hyst warn warn_hyst */ -static u16 W83795_REG_TEMP [][5 ] = { +static const u16 W83795_REG_TEMP [][5 ] = { {0x21 ,0x96 ,0x97 ,0x98 ,0x99 },/* TD1/TR1 */ {0x22 ,0x9a ,0x9b ,0x9c ,0x9d },/* TD2/TR2 */ {0x23 ,0x9e ,0x9f ,0xa0 ,0xa1 },/* TD3/TR3 */
@@ -1593,7 +1595,7 @@ static struct sensor_device_attribute_2 SENSOR_ATTR_IN(20), }; -static struct sensor_device_attribute_2 w83795_fan[][4 ] = { +static const struct sensor_device_attribute_2 w83795_fan[][4 ] = {SENSOR_ATTR_FAN (1 ),SENSOR_ATTR_FAN (2 ),SENSOR_ATTR_FAN (3 ),
@@ -1610,7 +1612,7 @@ static struct sensor_device_attribute_2 SENSOR_ATTR_FAN(14), }; -static struct sensor_device_attribute_2 w83795_temp[][29 ] = { +static const struct sensor_device_attribute_2 w83795_temp[][29 ] = {SENSOR_ATTR_TEMP (1 ),SENSOR_ATTR_TEMP (2 ),SENSOR_ATTR_TEMP (3 ),
@@ -1619,7 +1621,7 @@ static struct sensor_device_attribute_2 SENSOR_ATTR_TEMP(6), }; -static struct sensor_device_attribute_2 w83795_dts[][8 ] = { +static const struct sensor_device_attribute_2 w83795_dts[][8 ] = {SENSOR_ATTR_DTS (7 ),SENSOR_ATTR_DTS (8 ),SENSOR_ATTR_DTS (9 ),
@@ -1630,7 +1632,7 @@ static struct sensor_device_attribute_2 SENSOR_ATTR_DTS(14), }; -static struct sensor_device_attribute_2 w83795_pwm[][7 ] = { +static const struct sensor_device_attribute_2 w83795_pwm[][7 ] = {SENSOR_ATTR_PWM (1 ),SENSOR_ATTR_PWM (2 ),SENSOR_ATTR_PWM (3 ),
@@ -1641,7 +1643,7 @@ static struct sensor_device_attribute_2 SENSOR_ATTR_PWM(8), }; -static struct sensor_device_attribute_2 sda_single_files[] = { +static const struct sensor_device_attribute_2 sda_single_files[] = {SENSOR_ATTR_2 (chassis,S_IWUSR |S_IRUGO , show_alarm_beep, store_chassis_clear,ALARM_STATUS ,46 ), SENSOR_ATTR_2(beep_enable, S_IWUSR | S_IRUGO, show_beep_enable,
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors