hwmon: (w83795) Avoid reading the same
Subsystems (2)
PATCH 23/36 hwmon: (w83795) Avoid reading the same
Shorten driver load time by avoiding duplicate register access during initialization. This saves 112 ms on modprobe on my test system.
--- drivers/hwmon/w83795.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
drivers/hwmon/w83795.c +3 -0
@@ -1986,6 +1986,9 @@ static int w83795_probe(struct i2c_clien data->in[i][IN_READ ] = tmp; }for (i =0 ; i <IN_LSB_REG_NUM ; i++) { +if ((i =2 && data->chip_type = w83795adg) || + (i >=4 && !(data->has_in & (1 << (i +11 ))))) +continue ; data->in_lsb[i][IN_MAX] w83795_read(client, IN_LSB_REG(i, IN_MAX)); data->in_lsb[i][IN_LOW] @@ -1995,13 +1998,17 @@ static int w83795_probe(struct i2c_clien
/* First update fan and limits */
for (i = 0; i < ARRAY_SIZE(data->fan); i++) {
+ /* Each register contains LSB for 2 fans, but we want to
+ * read it only once to save time */
+ if ((i & 1) = 0 && (data->has_fan & (3 << i)))
+ tmp = w83795_read(client, W83795_REG_FAN_MIN_LSB(i));
+
if (!(data->has_fan & (1 << i)))
continue;
data->fan_min[i] w83795_read(client, W83795_REG_FAN_MIN_HL(i)) << 4;
data->fan_min[i] |- (w83795_read(client, W83795_REG_FAN_MIN_LSB(i)) >>
- W83795_REG_FAN_MIN_LSB_SHIFT(i)) & 0x0F;
+ (tmp >> W83795_REG_FAN_MIN_LSB_SHIFT(i)) & 0x0F;
data->fan[i] = w83795_read(client, W83795_REG_FAN(i)) << 4;
data->fan[i] | (w83795_read(client, W83795_REG_VRLSB) >> 4) & 0x0F;
_______________________________________________
lm-sensors mailing list
[email protected]
http://lists.lm-sensors.org/mailman/listinfo/lm-sensors