v2010.09-rc2 is out / "next" branch available
Hello everybody:
* U-Boot v2010.09-rc2 was released on Sun, 19 Sep 2010.
* Release "v2010.09" is scheduled in 18 days - on September 28, 2010.
For details please see
http://www.denx.de/wiki/U-Boot/ReleaseCycle
Please help testing, and check if all your relevant patches have been included.
We also have a new "next" branch now, which should be used as base for any new stuff scheduled to be added for the next release (v2010.12).
Please NOTE: due to some issues with the ARM relocation patches I had no choice but to rebase the "next" branch; sorry if this is causing inconveniences.
Also NOTE: the relocation support that was added to the ARM architecture (which brings it more in sync with the Power Architecture, so there is hope we can merge some more [now] common code) requires to adapt basicly all ARM boards. The changes are relatively simple and straightforward, but require in-depth understanding of the actual hardware - and testing, of course.
This is why the patches provided by Heiko cannot include all boards - this is a task to be performeed by the respective board maintainers. To make the task highly visible, compilation for this boards will actually _break_. See the commit message for commit f1d2b313 "ARM:
add relocation support" and doc/README.arm-relocation for further information (including adapting boards and debugging).
Boards that have not been adapted after some time (maximum 2 releases) are considered to be unmaintained and dead and will be removed.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de "And it should be the law: If you use the word `paradigm' without knowing what the dictionary says it means, you go to jail. No exceptions." - David Jones @ Megatest Corporation
Quoted 1 line · On Sunday, September 19, 2010 14:02:29 Wolfgang Denk wrote:
Please help testing
Blackfin looks sane
Quoted 1 line
check if all your relevant patches have been included.
could you merge this change:
29.07.2010 [PATCH v2] cmd_mmc: use common usage function
-mike
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: application/pgp-signature
Size: 836 bytes
Desc: This is a digitally signed message part.
Url : http://lists.denx.de/pipermail/u-boot/attachments/20100920/7c9e2254/attachment.pgp
Dear Mike Frysinger,
Quoted 4 lines · In message <[email protected]> you wrote:
Quoted 2 lines
Please help testing
Blackfin looks sane
Thanks.
Quoted 4 lines
Quoted 1 line
check if all your relevant patches have been included.
could you merge this change:
29.07.2010 [PATCH v2]cmd_mmc: use common usage function
Will do. Thanks for the reminder.
Best regards,
Wolfgang Denk
Signature · 4 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de Intel told us the Pentium would have "RISK" features...
A message that is not in the archive (sent off-list or not yet received): [email protected]
Dear Wolfgang,
Quoted 1 line
?check if all your relevant patches have been included.
I rebased against the "master" and resubmitted the POST Cleanup patch
(http://lists.denx.de/pipermail/u-boot/2010-September/077467.html) as was promised in
http://lists.denx.de/pipermail/u-boot/2010-August/075227.html. Should I resubmit it into the "next" branch or it can go into the current release?
Best regards,
Michael Zaidman
Dear Michael Zaidman,
Quoted 9 lines · In message <[email protected]> you…
Quoted 2 lines
check if all your relevant patches have been included.
I rebased against the "master" and resubmitted the POST Cleanup patch
(http://lists.denx.de/pipermail/u-boot/2010-September/077467.html) as was promised in
http://lists.denx.de/pipermail/u-boot/2010-August/075227.html. Should I resubmit it into the "next" branch or it can go into the current release?
Thanks for the reminder. Goes in now.
Best regards,
Wolfgang Denk
Signature · 6 lines
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Man is the best computer we can put aboard a spacecraft ... and the
only one that can be mass produced with unskilled labor.
- Wernher von BraunAm 19.09.2010 20:02, schrieb Wolfgang Denk:
Quoted 4 lines
Hello everybody:
* U-Boot v2010.09-rc2 was released on Sun, 19 Sep 2010.
Quoted 9 lines
* Release "v2010.09" is scheduled in 18 days - on September 28, 2010.
For details please see
http://www.denx.de/wiki/U-Boot/ReleaseCyclePlease help testing, and check if all your relevant patches have been included.
I've checked the boards eb_cpux9k2 and EB+MCF-EV123, both work with rc2
regards
Jens Scharsig
Hi Wolfgang
Quoted 11 lines · Wolfgang Denk
Hello everybody:
* U-Boot v2010.09-rc2 was released on Sun, 19 Sep 2010.
* Release "v2010.09" is scheduled in 18 days - on September 28, 2010.
For details please see
http://www.denx.de/wiki/U-Boot/ReleaseCyclePlease help testing, and check if all your relevant patches have been included.
The i.MX31 Litekit board boots Linux from tftp nicely with rc2. Haven't tried NAND or NOR flash functionality.
Regards, Magnus