ARM: Samsung: S5PC110: Place the common SPARSEMEM at CPU_S5PV210
Subsystems (3)
PATCH 1/2 ARM: Samsung: S5PC110: Place the common SPARSEMEM at CPU_S5PV210
From: Kyungmin Park <[email protected]>
In case of s5pc110 CPU. It uses the SPARSEMEN as default memory configuration. So move to CPU_S5PV210 config.
--- arch/arm/mach-s5pv210/Kconfig | 5 +---- 1 files changed, 1 insertions(+), 4 deletions(-)
arch/arm/mach-s5pv210/Kconfig +1 -4
@@ -14,6 +14,7 @@ config CPU_S5PV210 select PLAT_S5P select S3C_PL330_DMA select S5P_EXT_INT + select ARCH_SPARSEMEM_ENABLE help Enable S5PV210 CPU support
@@ -63,7 +64,6 @@ menu "S5PC110 Machines" config MACH_AQUILA bool "Aquila" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_FB select S5P_DEV_FIMC0 select S5P_DEV_FIMC1
@@ -80,7 +80,6 @@ config MACH_AQUILA config MACH_GONI bool "GONI" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_FB select S5P_DEV_FIMC0 select S5P_DEV_FIMC1
@@ -98,7 +97,6 @@ config MACH_GONI config MACH_SMDKC110 bool "SMDKC110" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_I2C1 select S3C_DEV_I2C2 select S3C_DEV_RTC
@@ -118,7 +116,6 @@ menu "S5PV210 Machines" config MACH_SMDKV210 bool "SMDKV210" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2
Signature · 1 line
1.5.3.3
PATCH 1/2 ARM: Samsung: S5PC110: Place the common SPARSEMEM at CPU_S5PV210
Quoted 4 lines · Kyungmin Park
From: Kyungmin Park <[email protected]>
In case of s5pc110 CPU. It uses the SPARSEMEN as default memory
Sparsemem?
Quoted 13 lines
configuration.
So move toCPU_S5PV210config.Signed-off-by Kyungmin Park <[email protected]>--- arch/arm/mach-s5pv210/Kconfig | 5 +---- 1 files changed, 1 insertions(+), 4 deletions(-)arch/arm/mach-s5pv210/Kconfig +0
-0
arch/arm/mach-s5pv210/Kconfig config CPU_S5PV210 · line 17
Quoted 4 lines
arch/arm/mach-s5pv210/Kconfig +1
-0@@ -14,6 +14,7 @@ config CPU_S5PV210 select PLAT_S5P select S3C_PL330_DMA select S5P_EXT_INT + select ARCH_SPARSEMEM_ENABLE
I think, should being in the ARCH_S5PV210 not here. Your other patch, same.
Quoted 28 lines
arch/arm/mach-s5pv210/Kconfig +0
-3help Enable S5PV210 CPU support@@ -63,7 +64,6 @@ menu "S5PC110 Machines" config MACH_AQUILA bool "Aquila" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_FB select S5P_DEV_FIMC0 select S5P_DEV_FIMC1@@ -80,7 +80,6 @@ config MACH_AQUILA config MACH_GONI bool "GONI" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_FB select S5P_DEV_FIMC0 select S5P_DEV_FIMC1@@ -98,7 +97,6 @@ config MACH_GONI config MACH_SMDKC110 bool "SMDKC110" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_I2C1 select S3C_DEV_I2C2 select S3C_DEV_RTC
arch/arm/mach-s5pv210/Kconfig menu "S5PV210 Machines"
Quoted 8 lines
arch/arm/mach-s5pv210/Kconfig +0
-2@@ -118,7 +116,6 @@ menu "S5PV210 Machines" config MACH_SMDKV210 bool "SMDKV210" select CPU_S5PV210 - select ARCH_SPARSEMEM_ENABLE select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 --
Thanks.
Best regards,
Kgene.
--
Kukjin Kim <[email protected]>, Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd.