Skip to contentSkip to conversation

Add VIA VX855 multi-function device support

PATCH In review Daniel Drake 1 participant 1 message Sep 30, 2010 Multifunction devices (MFD)

lore
Share & tools
lore
#0 lore raw

PATCH 2/3 Add VIA VX855 multi-function device support

This device has GPIO, SPI and I2C capabilities.

The hardware can be found in the OLPC XO-1.5 laptop.

Based on earlier work by Harald Welte.

---
 drivers/mfd/Kconfig  |    9 +++
 drivers/mfd/Makefile |    1 +
 drivers/mfd/vx855.c  |  147 ++++++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 157 insertions(+), 0 deletions(-)
 create mode 100644 drivers/mfd/vx855.c

Switched to the mfd cells design to allow the individual functions to be registered as platform devices.

I've dropped the SPI driver from the submission.
It presented a headache with the resource system, the commit message in the original version suggests that it might not be complete, and I have no way of testing it. It could be cleanly added later if someone needs it and can finish the work.

drivers/mfd/Kconfig +9 -0
index 256fabd..9735f58 100644
@@ -576,6 +576,15 @@ config MFD_TPS6586X
 	  This driver can also be built as a module.  If so, the module
 	  will be called tps6586x.
 
+config MFD_VX855
+	tristate "Support for VIA VX855/VX875 integrated south bridge"
+	depends on PCI
+	select MFD_CORE
+	help
+	  Say yes here to enable support for various functions of the
+	  VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
+	  and/or vx855_gpio drivers for this to do anything useful.
+
 endif # MFD_SUPPORT
 
 menu "Multimedia Capabilities Port drivers"
drivers/mfd/Makefile +1 -0
index d5968cd..d18a6ab 100644
@@ -78,3 +78,4 @@ obj-$(CONFIG_MFD_RDC321X)	+= rdc321x-southbridge.o
 obj-$(CONFIG_MFD_JANZ_CMODIO)	+= janz-cmodio.o
 obj-$(CONFIG_MFD_JZ4740_ADC)	+= jz4740-adc.o
 obj-$(CONFIG_MFD_TPS6586X)	+= tps6586x.o
+obj-$(CONFIG_MFD_VX855)		+= vx855.o
drivers/mfd/vx855.c new file +147 -0

147 lines not on this page · raw message

Signature · 1 line
1.7.2.3