Skip to contentSkip to conversation

ppc44x: config GPIOs for USB on canyonlands board

PATCH New Rupjyoti Sarmah 2 participants 2 messages Oct 1, 2010 – Oct 4, 2010

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 ppc44x: config GPIOs for USB on canyonlands board

The GPIO 16 and 19 reconfiguration should be done once USB is initialized. So moved the reconfiguration to the USB init function.

---
 board/amcc/canyonlands/canyonlands.c |   23 +++++++++++++----------
 1 files changed, 13 insertions(+), 10 deletions(-)
board/amcc/canyonlands/canyonlands.c +13 -10
index 158f7bb..09adc3b 100644
@@ -195,16 +195,6 @@ int board_early_init_f(void)
 	mtdcr(AHB_TOP, 0x8000004B);
 	mtdcr(AHB_BOT, 0x8000004B);
 
-	if (pvr_460ex()) {
-		/*
-		 * Configure USB-STP pins as alternate and not GPIO
-		 * It seems to be neccessary to configure the STP pins as GPIO
-		 * input at powerup (perhaps while USB reset is asserted). So
-		 * we configure those pins to their "real" function now.
-		 */
-		gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
-		gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
-	}
 #endif
 
 	return 0;
@@ -222,6 +212,15 @@ int usb_board_init(void)
 	val &= ~(BCSR_USBCTRL_OTG_RST | BCSR_USBCTRL_HOST_RST);
 	out_8(&bcsr_data->usb_ctrl, val);
 
+	/*
+	 * Configure USB-STP pins as alternate and not GPIO
+	 * It seems to be neccessary to configure the STP pins as GPIO
+	 * input at powerup (perhaps while USB reset is asserted). So
+	 * we configure those pins to their "real" function now.
+	 */
+	gpio_config(16, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
+	gpio_config(19, GPIO_OUT, GPIO_ALT1, GPIO_OUT_1);
+
 	return 0;
 }
 
@@ -236,6 +235,10 @@ int usb_board_stop(void)
 	val |= (BCSR_USBCTRL_OTG_RST | BCSR_USBCTRL_HOST_RST);
 	out_8(&bcsr_data->usb_ctrl, val);
 
+	/* Reconfigure USB-STP pins as input */
+	gpio_config(16, GPIO_IN , GPIO_SEL, GPIO_OUT_0);
+	gpio_config(19, GPIO_IN , GPIO_SEL, GPIO_OUT_0);
+
 	return 0;
 }
 
Signature · 1 line
1.5.6.3
#1 lore raw

PATCH 1/1 ppc44x: config GPIOs for USB on canyonlands board

Quoted 2 lines · On Friday 01 October 2010 11:01:28 Rupjyoti Sarmah wrote:

The GPIO 16 and 19 reconfiguration should be done once USB is initialized. So moved the reconfiguration to the USB init function.

Applied to u-boot-ppc4xx/master. Thanks.

Cheers,
Stefan

--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-0 Fax: (+49)-8142-66989-80 Email: office at denx.de