ide: set WCACHE supported in IDENTIFY data
PATCH 1/1 ide: set WCACHE supported in IDENTIFY data
ATA does not only have the WCACHE enabled bit in identify word 85, but also a WCACHE supported bit in word 82. While the Linux kernel is fine with the latter at least hdparm also needs the former before correctly displaying the cache settings. There's also a non-zero chance other operating systems are more picky in their volatile write cache detection.
hw/ide/core.c +2 -2
@@ -146,8 +146,8 @@ static void ide_identify(IDEState *s)put_le16 (p +68 ,120 );put_le16 (p +80 ,0xf0 );/* ata3 -> ata6 supported */ put_le16 (p +81 ,0x16 );/* conforms to ata5 */ -/* 14=NOP supported, 0=SMART supported */ -put_le16 (p +82 , (1 <<14 ) |1 ); +/* 14=NOP supported, 5=WCACHE supported, 0=SMART supported */ +put_le16 (p +82 , (1 <<14 ) | (1 <<5 ) |1 );/* 13=flush_cache_ext,12=flush_cache,10=lba48 */ put_le16 (p +83 , (1 <<14 ) | (1 <<13 ) | (1 <<12 ) | (1 <<10 ));/* 14=set to 1, 1=SMART self test, 0=SMART error logging */
Kevin Wolf
AppliedAm 04.10.2010 15:29, schrieb Christoph Hellwig:
Quoted 7 lines
ATA does not only have the WCACHE enabled bit in identify word 85, but also a WCACHE supported bit in word 82. While the Linux kernel is fine with the latter at least hdparm also needs the former before correctly displaying the cache settings. There's also a non-zero chance other operating systems are more picky in their volatile write cache detection.
Signed-off-by Christoph Hellwig <[email protected]>
Thanks, applied to the block branch.
Kevin