ehci-pci: print hccr, hcor and hc_lenght
Subsystems (2)
PATCH v2 1/1 ehci-pci: print hccr, hcor and hc_lenght
It is useful to know the EHCI-PCI hccr, hcor and hc_lenght to make sure it was successfully registered, and at the correct location.
---
Changes since v1:
- replaced printf by debug
drivers/usb/host/ehci-pci.c +4 -0
@@ -53,6 +53,10 @@ int ehci_hcd_init(void) hcor = (struct ehci_hcor *)((uint32_t ) hccr +HC_LENGTH (ehci_readl (&hccr->cr_capbase))); +debug ("EHCI-PCI init hccr 0x%x and hcor 0x%x hc_length %d\n" , + (uint32_t )hccr, (uint32_t )hcor, + (uint32_t )HC_LENGTH (ehci_readl (&hccr->cr_capbase))); +return 0 ; }
PATCH v2 1/1 ehci-pci: print hccr, hcor and hc_lenght
Hi,
2010/10/15 Florian Fainelli <[email protected]>:
Quoted 16 lines
It is useful to know the EHCI-PCI hccr, hcor and
hc_lenghtto make sure it was successfully registered, and at the correct location.Signed-off-by Florian Fainelli <[email protected]>---
Changes since v1:
- replaced printf by debugdrivers/usb/host/ehci-pci.c +0
-0@@ -53,6 +53,10 @@ int ehci_hcd_init(void)? ? ? ?hcor = (struct
ehci_hcor*)((uint32_t) hccr +
? ? ? ? ? ? ? ? ? ? ? ?HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
Quoted 6 lines
+ ? ? ? debug("EHCI-PCI init hccr 0x%x and hcor 0x%x
hc_length%d\n",
+ ? ? ? ? ? ? ? ? ? ? ? (uint32_t)hccr, (uint32_t)hcor,
+ ? ? ? ? ? ? ? ? ? ? ? (uint32_t)HC_LENGTH(ehci_readl(&hccr->cr_capbase))); +
? ? ? ?return 0;
?}
Applied to u-boot-usb.
Thanks.
Remy