Skip to contentSkip to conversation

mlx4: Fix vlan insertion order

PATCH In review Eli Cohen 2 participants 3 messages Nov 17, 2010 – Dec 2, 2010 1 message not in the archive

Subsystems (2)
lore
Share & tools
lore

Eli Cohen

author
#0 lore raw

PATCH 1/1 mlx4: Fix vlan insertion order

We must update the control segment before marking it as valid.

---
 drivers/infiniband/hw/mlx4/qp.c |    6 +++---
 1 files changed, 3 insertions(+), 3 deletions(-)
drivers/infiniband/hw/mlx4/qp.c +3 -3
index ec2c9bb..3d0c6d7 100644
@@ -1953,14 +1953,14 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 			goto out;
 		}
 
-		ctrl->owner_opcode = mlx4_ib_opcode[wr->opcode] |
-			(ind & qp->sq.wqe_cnt ? cpu_to_be32(1 << 31) : 0) | blh;
-
 		if (be16_to_cpu(vlan) < 0x1000) {
 			ctrl->ins_vlan = 1 << 6;
 			ctrl->vlan_tag = vlan;
 		}
 
+		ctrl->owner_opcode = mlx4_ib_opcode[wr->opcode] |
+			(ind & qp->sq.wqe_cnt ? cpu_to_be32(1 << 31) : 0) | blh;
+
 		stamp = ind + qp->sq_spare_wqes;
 		ind += DIV_ROUND_UP(size * 16, 1U << qp->sq.wqe_shift);
 
Signature · 6 lines
1.7.3.2

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
#1 lore raw

I think we actually want the vlan control bits set before the wmb() there. I applied the following patch:

 drivers/infiniband/hw/mlx4/qp.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)
drivers/infiniband/hw/mlx4/qp.c +5 -5
index 9a7794a..2001f20 100644
@@ -1816,6 +1816,11 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 		ctrl->fence_size = (wr->send_flags & IB_SEND_FENCE ?
 				    MLX4_WQE_CTRL_FENCE : 0) | size;
 
+		if (be16_to_cpu(vlan) < 0x1000) {
+			ctrl->ins_vlan = 1 << 6;
+			ctrl->vlan_tag = vlan;
+		}
+
 		/*
 		 * Make sure descriptor is fully written before
 		 * setting ownership bit (because HW can start
@@ -1831,11 +1836,6 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 		ctrl->owner_opcode = mlx4_ib_opcode[wr->opcode] |
 			(ind & qp->sq.wqe_cnt ? cpu_to_be32(1 << 31) : 0) | blh;
 
-		if (be16_to_cpu(vlan) < 0x1000) {
-			ctrl->ins_vlan = 1 << 6;
-			ctrl->vlan_tag = vlan;
-		}
-
 		stamp = ind + qp->sq_spare_wqes;
 		ind += DIV_ROUND_UP(size * 16, 1U << qp->sq.wqe_shift);
 

--
To unsubscribe from this list: send the line "unsubscribe linux-rdma" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html

A message that is not in the archive (sent off-list or not yet received): [email protected]