mmc:implemented HW reset in mmc core layer
PATCH v3 1/2 mmc:implemented HW reset in mmc core layer
Quoted 1 line
From
49962ed89078717d539805f999503b2d29a42b05Mon Sep 17 00:00:00 2001
From: Chuanxiao Dong <[email protected]>
Date: Thu, 18 Nov 2010 10:25:44 +0800
Subject: [PATCH 1/2] mmc: implemented eMMC4.4 hardware reset feature in mmc core layer
When core layer detect a data timeout error, core driver need to first reset eMMC card and then do a reinit for card. After that, posts the original timeout error to mmc block layer.
1. enable hardware reset feature: to enable hardware reset feature, mmc driver need to set RST_n_function bit in ext_csd register. But this bit is onetime programmable, not sure whether it is suitable for driver to set this bit.
2. The reset part was resvered for host controller to implement.
3. The reinit card part was implemented.
--- drivers/mmc/core/core.c | 28 ++++++++++++++++++++++++++ drivers/mmc/core/core.h | 9 ++++++++ drivers/mmc/core/mmc.c | 48 ++++++++++++++++++++++++++++++++++++++++++++++ include/linux/mmc/card.h | 1 + include/linux/mmc/host.h | 10 +++++++++ include/linux/mmc/mmc.h | 1 + 6 files changed, 97 insertions(+), 0 deletions(-)
drivers/mmc/core/core.c +28 -0
@@ -212,6 +212,8 @@ static void mmc_wait_done(struct mmc_request *mrq)*/ void mmc_wait_for_req (struct mmc_host *host,struct mmc_request *mrq) { +struct mmc_card *card = host->card; +DECLARE_COMPLETION_ONSTACK (complete); mrq->done_data = &complete;
@@ -220,6 +222,32 @@ void mmc_wait_for_req(struct mmc_host *host, struct mmc_request *mrq)mmc_start_request (host, mrq);wait_for_completion (&complete); + +/* +* as MMC4.4 standard says, when some data timeout conditions +* occur, HC need to do a hardware reset for eMMC4.4 card. +* If the card is eMMC4.4 card && data error is timeout, +* do the following things: +* 1. let host controller do a specific hardware reset for eMMC +* card (trigger RST_n signal). +* 2. after reset done, reinit eMMC4.4 card. +*/ +if (mrq->data && card && + mrq->data->error == -ETIMEDOUT && + card->ext_csd.rst ==1 ) { +int err =1 ; +if (host->ops->hardware_reset && + host->bus_ops->reinit) { + err = host->ops->hardware_reset (host); +if (err) +pr_warn ("MMC card reset failed\n" ); +else + err = host->bus_ops->reinit (host); + } + +if (err) +pr_warn ("cannot reset and reinit eMMC4.4 card\n" ); + } }EXPORT_SYMBOL (mmc_wait_for_req);
drivers/mmc/core/core.h +9 -0
@@ -24,6 +24,15 @@ struct mmc_bus_ops {int (*resume)(struct mmc_host *);int (*power_save)(struct mmc_host *);int (*power_restore)(struct mmc_host *); +/* +* New reinit callback. +* Used to reinit card when a reset occurs +* or someother conditions +* return value: +* 0: successfully reinit card. +* negative value: failed to reinit +*/ +int (*reinit)(struct mmc_host *); };void mmc_attach_bus (struct mmc_host *host,const struct mmc_bus_ops *ops);
drivers/mmc/core/mmc.c +48 -0
78 lines not on this page · raw message
include/linux/mmc/card.h +1 -0
@@ -54,6 +54,7 @@ struct mmc_ext_csd {unsigned int sec_trim_mult;/* Secure trim multiplier */ unsigned int sec_erase_mult;/* Secure erase multiplier */ unsigned int trim_timeout;/* In milliseconds */ +unsigned int rst;/* hardware reset enable bit */ };struct sd_scr {
include/linux/mmc/host.h +10 -0
@@ -117,6 +117,16 @@ struct mmc_host_ops {/* optional callback for HC quirks */ void (*init_card)(struct mmc_host *host,struct mmc_card *card); + +/* +* HW reset callback, used for eMMC 4.4 new feature. +* when occurs data timeout, HC can calling this callback +* to reset eMMC card. +* return value: +* 0: successfully reset the eMMC card. +* -ENODEV: no valid hardware to do so. +*/ +int (*hardware_reset)(struct mmc_host *host); };struct mmc_card ;
include/linux/mmc/mmc.h +1 -0
@@ -251,6 +251,7 @@ struct _mmc_csd {* EXT_CSD fields */ +#define EXT_CSD_RST 162/* onetime programmable R/W */ #define EXT_CSD_ERASE_GROUP_DEF 175/* R/W */ #define EXT_CSD_ERASED_MEM_CONT 181/* RO */ #define EXT_CSD_BUS_WIDTH 183/* R/W */
Signature · 1 line
1.6.6.1