mmc:Add a new quirk for SDHCI HC to erase single erase block
PATCH v2 1/3 mmc:Add a new quirk for SDHCI HC to erase single erase block
Quoted 1 line
From
3e4ee72e57a667f383f34a9e3276f2431b7bb53dMon Sep 17 00:00:00 2001
From: Chuanxiao Dong <[email protected]>
Date: Thu, 18 Nov 2010 16:06:35 +0800
Subject: [PATCH 1/3] mmc: Added a new quirk for SDHCI HC to erase single erase block
Some sdhci host controller like MFLD sdhci host controller cannot erase unlimited sectors one time since host controller may generate a timeout interrupt before erasing is done. This should be a architecture issue. So added a quirk for host controller to use.
With this quirk, sdhci host controller can set a suitable max_discard_sectors value which will be safe for erasing.
Patch add two follow things
1. Add SDHCI_QUIRK_FORCE_ERASE_SINGLE and MMC_CAP_ERASE_SINGLE for this kind of sdhci host controller.
2. Add a routine mmc_set_discard_limit in mmc core layer to set a safe secotrs value.
--- drivers/mmc/card/queue.c | 8 +++++++- drivers/mmc/core/core.c | 27 +++++++++++++++++++++++++++ drivers/mmc/host/sdhci.c | 4 ++++ include/linux/mmc/core.h | 1 + include/linux/mmc/host.h | 2 ++ include/linux/mmc/sdhci.h | 2 ++ 6 files changed, 43 insertions(+), 1 deletions(-)
drivers/mmc/card/queue.c +7 -1
@@ -131,7 +131,13 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lockqueue_flag_set_unlocked (QUEUE_FLAG_NONROT , mq->queue);if (mmc_can_erase (card)) {queue_flag_set_unlocked (QUEUE_FLAG_DISCARD , mq->queue); - mq->queue->limits.max_discard_sectors =UINT_MAX ; +/* get a suitable max_discard_sectors limitation */ + ret =mmc_set_discard_limit (card); +if (ret >0 ) + mq->queue->limits.max_discard_sectors = ret; +else + mq->queue->limits.max_discard_sectors =UINT_MAX ; +if (card->erased_byte ==0 ) mq->queue->limits.discard_zeroes_data =1 ;if (!mmc_can_trim (card) &&is_power_of_2 (card->erase_size)) {
drivers/mmc/core/core.c +27 -0
@@ -1454,6 +1454,33 @@ int mmc_erase_group_aligned(struct mmc_card *card, unsigned int from, }EXPORT_SYMBOL (mmc_erase_group_aligned); +/* +* mmc_set_discard_limit: set the max_discard_sectors according +* to host controller timeout capability. +*/ +int mmc_set_discard_limit (struct mmc_card *card) +{ +struct mmc_host *host; +unsigned int nr =0 ; + host = card->host; +if (host->caps &MMC_CAP_ERASE_SINGLE ) { +/* +* Have to set a small limitation for request queue +* to ensure that host controller won't generate a +* timeout interrupt during waiting, here let limitation +* to be 1 erase block. And this will let TRIM/ERASE +* performance lower. +*/ + nr =1 ; +if (card->erase_shift) + nr <<= card->erase_shift; +else + nr *= card->erase_size; + } +return nr; +} +EXPORT_SYMBOL (mmc_set_discard_limit); +int mmc_set_blocklen (struct mmc_card *card,unsigned int blocklen) {struct mmc_command cmd;
drivers/mmc/host/sdhci.c +4 -0
@@ -1857,6 +1857,10 @@ int sdhci_add_host(struct sdhci_host *host) mmc->f_min = host->max_clk /SDHCI_MAX_DIV_SPEC_200 ; mmc->f_max = host->max_clk; mmc->caps |=MMC_CAP_SDIO_IRQ ; + mmc->caps |=MMC_CAP_ERASE ; + +if (host->quirks &SDHCI_QUIRK_FORCE_ERASE_SINGLE ) + mmc->caps |=MMC_CAP_ERASE_SINGLE ;if (!(host->quirks &SDHCI_QUIRK_FORCE_1_BIT_DATA )) mmc->caps |=MMC_CAP_4_BIT_DATA |MMC_CAP_8_BIT_DATA ;
include/linux/mmc/core.h +1 -0
@@ -152,6 +152,7 @@ extern int mmc_can_trim(struct mmc_card *card);extern int mmc_can_secure_erase_trim (struct mmc_card *card);extern int mmc_erase_group_aligned (struct mmc_card *card,unsigned int from,unsigned int nr); +extern int mmc_set_discard_limit (struct mmc_card *card);extern int mmc_set_blocklen (struct mmc_card *card,unsigned int blocklen);
include/linux/mmc/host.h +2 -0
@@ -168,6 +168,8 @@ struct mmc_host {/* DDR mode at 1.8V */ #define MMC_CAP_1_2V_DDR (1 << 12)/* can support */ /* DDR mode at 1.2V */ +#define MMC_CAP_ERASE_SINGLE (1 << 13) +/* Erase signle erase block each time */ mmc_pm_flag_t pm_caps;/* supported pm features */
include/linux/mmc/sdhci.h +2 -0
@@ -83,6 +83,8 @@ struct sdhci_host {#define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28)/* Controller doesn't have HISPD bit field in HI-SPEED SD card */ #define SDHCI_QUIRK_NO_HISPD_BIT (1<<29) +/* Controller has an issue with erase/trim the whole device at one time */ +#define SDHCI_QUIRK_FORCE_ERASE_SINGLE (1<<30)int irq;/* Device IRQ */ void __iomem *ioaddr;/* Mapped address */
Signature · 1 line
1.6.6.1