Skip to contentSkip to conversation

x86, perf, nmi: Disable perf if counters are not accessable

PATCH Cyrill Gorcunov 1 participant 1 message Nov 23, 2010

lore
Share & tools
lore
#0 lore raw
Quoted 22 lines · Peter Zijlstra
Quoted 21 lines · Cyrill Gorcunov
Quoted 11 lines · Peter Zijlstra
Quoted 9 lines · Sedat Dilek

Due to BIOS l(ocal)apic is not possible:

# dmesg | grep -i apic
[    0.000000] Using APIC driver default
[    0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[    0.000000] APIC: disable apic facility
[    0.000000] APIC: switched to apic NOOP
[    0.008891] no APIC, boot with the "lapic" boot parameter to force-enable it.
[    0.036141] Local APIC not detected. Using dummy APIC emulation. 
Quoted 2 lines

Have you tried booting with "lapic" as the second last msg suggests you do?

Peter, Don, might not we need something like the patch below -- ie to check for
apic earlier and do not acquire cpu for PERF cpu bit, and its cpu model, etc if there is no active apic? And perhaps for nmi-watchdog, we should not try to creat perf event for same reason and simply report that nmi-watchdog is disabled (though of course hpet based one should try to continue).

Quoted 8 lines
Quoted 2 lines

No?

Ah, no.. now I get what you mean.

We can use the pmu without interrupt with we miss the lapic, that is perf-stat will still work.

Yeah, I forgot about perf-stat

Cyrill