Skip to contentSkip to conversation

U-Boot support for board(s) AT91RM9200DK

DISCUSSION [email protected] 1 participant 1 message Jan 23, 2009 10 messages not in the archive

lore
Share & tools
lore

A message that is not in the archive (sent off-list or not yet received): 20101127215901.95380220235C@lilith

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

A message that is not in the archive (sent off-list or not yet received): [email protected]

#10 lore raw

Hi All,

Here is what I've done so far:

git clone git://git.denx.de/u-boot-atmel.git
cd u-boot-atmel
git checkout -b rework101229

- used CodeSourcery/Sourcery_G++_Lite:

/u-boot-atmel> /opt/CodeSourcery/Sourcery_G++_Lite/bin/arm-none-linux-gnueabi-gcc --version arm-none-linux-gnueabi-gcc (Sourcery G++ Lite 2010q1-202) 4.4.1

Hopefully this compiler is okay, please tell me if it's not.

- looked at:

commit 0693923cd240f5d401be0a53cddcf0fb1d9ad9d3 in the current u-boot

- Make a bunch of changes but still have 2 warnings (see
http://www.efn.org/~rick/pub/build.log):

cpu.c:37: warning: #warning Your board is using legacy AT91RM9200 SoC access. Please update! at91_emac.c:487: warning: dereferencing type-punned pointer will break strict-aliasing rules

What should I do about these?

I made a patch file, please check it over.
http://www.efn.org/~rick/pub/uboot.diff

I'll try it on the board soon....

Thanks,

Rick