Skip to contentSkip to conversation

cs5535-gpio: apply CS5536 errata workaround for GPIOs

PATCH In review Andres Salomon 2 participants 2 messages Nov 30, 2010 GPIO

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 cs5535-gpio: apply CS5536 errata workaround for GPIOs

The AMD Geode CS5536 Companion Device Silicon Revision B1 Specification Update mentions the follow as issue #36:

"Atomic write transactions to the atomic GPIO High Bank Feature Bit registers should only affect the bits selected [...]"
"after Suspend, an atomic write transaction [...] will clear all non-selected bits of the accessed register."

In other words, writing to the high bank for a single GPIO bit will clear every other GPIO bit (but only sometimes after a suspend). The workaround described is obvious and simple; do a read-modify-write. This patch does that, and documents why we're doing it.

---
 drivers/gpio/cs5535-gpio.c |   16 ++++++++++++++--
 1 files changed, 14 insertions(+), 2 deletions(-)
drivers/gpio/cs5535-gpio.c +14 -2
index e23c068..599f6c9 100644
@@ -56,6 +56,18 @@ static struct cs5535_gpio_chip {
  * registers, see include/linux/cs5535.h.
  */
 
+static void errata_outl(u32 val, unsigned long addr)
+{
+	/*
+	 * According to the CS5536 errata (#36), after suspend
+	 * a write to the high bank GPIO register will clear all
+	 * non-selected bits; the recommended workaround is a
+	 * read-modify-write operation.
+	 */
+	val |= inl(addr);
+	outl(val, addr);
+}
+
 static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset,
 		unsigned int reg)
 {
@@ -64,7 +76,7 @@ static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset,
 		outl(1 << offset, chip->base + reg);
 	else
 		/* high bank register */
-		outl(1 << (offset - 16), chip->base + 0x80 + reg);
+		errata_outl(1 << (offset - 16), chip->base + 0x80 + reg);
 }
 
 void cs5535_gpio_set(unsigned offset, unsigned int reg)
@@ -86,7 +98,7 @@ static void __cs5535_gpio_clear(struct cs5535_gpio_chip *chip, unsigned offset,
 		outl(1 << (offset + 16), chip->base + reg);
 	else
 		/* high bank register */
-		outl(1 << offset, chip->base + 0x80 + reg);
+		errata_outl(1 << offset, chip->base + 0x80 + reg);
 }
 
 void cs5535_gpio_clear(unsigned offset, unsigned int reg)
Signature · 1 line
1.5.6.5
#1 lore raw
Quoted 9 lines · Andres Salomon

The AMD Geode CS5536 Companion Device Silicon Revision B1 Specification Update mentions the follow as issue #36:

"Atomic write transactions to the atomic GPIO High Bank Feature Bit registers should only affect the bits selected [...]"
"after Suspend, an atomic write transaction [...] will clear all non-selected bits of the accessed register."

Quoted 6 lines

In other words, writing to the high bank for a single GPIO bit will clear every other GPIO bit (but only sometimes after a suspend). The workaround described is obvious and simple; do a read-modify-write. This patch does that, and documents why we're doing it.

Please read Documentation/stable_kernel_rules.txt for how to get patches into the stable kernel releases (hint, this wasn't the proper way...)

thanks,

greg k-h