Skip to contentSkip to conversation

dm raid seed module

PATCH New Jonathan Brassow 1 participant 1 message Dec 3, 2010

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

PATCH 1/1 dm raid seed module

Patch name: dm-raid-seed-module.patch

This patch is the skeleton for the DM target that will be the bridge from DM to MD (specifically, RAID456). It provides a way to use device-mapper interfaces to the MD RAID456 drivers.

The original patch came from Neil Brown. I've changed a bit of the patch, but left the original 'Signed-off-by'.

<JB> I also basically copied the RAID descriptions from
MD for the Kconfig entry...

drivers/md/Kconfig +22 -0
Index: linux-2.6/drivers/md/Kconfig
===================================================================
@@ -240,6 +240,28 @@ config DM_MIRROR
          Allow volume managers to mirror logical volumes, also
          needed for live data migration tools such as 'pvmove'.
 
+config DM_RAID
+       tristate "RAID 4/5/6 target (EXPERIMENTAL)"
+       depends on BLK_DEV_DM && MD_RAID456 && EXPERIMENTAL
+       ---help---
+	 A dm target that supports RAID4, RAID5 and RAID6 mappings
+
+	 A RAID-5 set of N drives with a capacity of C MB per drive provides
+	 the capacity of C * (N - 1) MB, and protects against a failure
+	 of a single drive. For a given sector (row) number, (N - 1) drives
+	 contain data sectors, and one drive contains the parity protection.
+	 For a RAID-4 set, the parity blocks are present on a single drive,
+	 while a RAID-5 set distributes the parity across the drives in one
+	 of the available parity distribution methods.
+
+	 A RAID-6 set of N drives with a capacity of C MB per drive
+	 provides the capacity of C * (N - 2) MB, and protects
+	 against a failure of any two drives. For a given sector
+	 (row) number, (N - 2) drives contain data sectors, and two
+	 drives contains two independent redundancy syndromes.  Like
+	 RAID-5, RAID-6 distributes the syndromes across the drives
+	 in one of the available parity distribution methods.
+
 config DM_LOG_USERSPACE
 	tristate "Mirror userspace logging (EXPERIMENTAL)"
 	depends on DM_MIRROR && EXPERIMENTAL && NET
drivers/md/Makefile +1 -0
Index: linux-2.6/drivers/md/Makefile
===================================================================
@@ -36,6 +36,7 @@ obj-$(CONFIG_DM_SNAPSHOT)	+= dm-snapshot
 obj-$(CONFIG_DM_MIRROR)		+= dm-mirror.o dm-log.o dm-region-hash.o
 obj-$(CONFIG_DM_LOG_USERSPACE)	+= dm-log-userspace.o
 obj-$(CONFIG_DM_ZERO)		+= dm-zero.o
+obj-$(CONFIG_DM_RAID)	+= dm-raid.o
 
 ifeq ($(CONFIG_DM_UEVENT),y)
 dm-mod-objs			+= dm-uevent.o
drivers/md/dm-raid.c new file +462 -0

462 lines not on this page · raw message