Skip to contentSkip to conversation

add Technisat skystar usb plus USB-ID

PATCH Halim Sahin 2 participants 2 messages Dec 5, 2010 – Dec 22, 2010 Media (V4L/DVB)

lore
Share & tools
lore

Halim Sahin

author
#0 lore raw

this device is a rebranded Technotrend s-2400 with USB id 0x3009. THx to Carsten Wehmeier for reporting

Signed-off-by Halim Sahin <[email protected]>

---
drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 +

 1 files changed, 1 insertions(+), 0 deletions(-)
drivers/media/dvb/dvb-usb/dvb-usb-ids.h +1 -0
index 192a40c..380066b 100644
@@ -204,6 +204,7 @@
 #define USB_PID_AVERMEDIA_A805				0xa805
 #define USB_PID_AVERMEDIA_A815M				0x815a
 #define USB_PID_TECHNOTREND_CONNECT_S2400               0x3006
+#define USB_PID_TECHNOTREND_CONNECT_S2400               0x3009
 #define USB_PID_TECHNOTREND_CONNECT_CT3650		0x300d
 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY	0x005a
 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2	0x0081
#1 lore raw

Em 05-12-2010 12:31, Halim Sahin escreveu:

Quoted 15 lines

this device is a rebranded Technotrend s-2400 with USB id 0x3009. THx to Carsten Wehmeier for reporting

Signed-off-by Halim Sahin <[email protected]>

---
drivers/media/dvb/dvb-usb/dvb-usb-ids.h | 1 +

 1 files changed, 1 insertions(+), 0 deletions(-)
drivers/media/dvb/dvb-usb/dvb-usb-ids.h +0 -0
index 192a40c..380066b 100644

drivers/media/dvb/dvb-usb/dvb-usb-ids.h line 210

Quoted 7 lines
drivers/media/dvb/dvb-usb/dvb-usb-ids.h +1 -0
@@ -204,6 +204,7 @@
 #define USB_PID_AVERMEDIA_A805				0xa805
 #define USB_PID_AVERMEDIA_A815M				0x815a
 #define USB_PID_TECHNOTREND_CONNECT_S2400               0x3006
+#define USB_PID_TECHNOTREND_CONNECT_S2400               0x3009
 #define USB_PID_TECHNOTREND_CONNECT_CT3650		0x300d
 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY	0x005a
 #define USB_PID_TERRATEC_CINERGY_DT_XS_DIVERSITY_2	0x0081

Just adding a new ID at dvb-usb-ids.h is the wrong thing to do. This will break support for 0x3006 device. Instead, you should add a new definition, with a different name, and duplicate the board entry at the driver that has support for this device.

Thanks,
Mauro