Skip to contentSkip to conversation

video/mx3fb: fix clock divider

U-Boot Applied Wolfgang Denk 3 participants 6 messages Dec 16, 2010 – Dec 17, 2010 Framebuffer layer

lore
Share & tools
lore
#0 lore raw

From: Stefano Babic <[email protected]>

Fix clock divider for COM57H5M10XRC display.
The previous setting caused flicker.

Tested on Qong (EVBLite with COM57H5M10XRC).

---

drivers/video/mx3fb.c +1 -1
index 7f04b49..893ec04 100644
@@ -85,7 +85,7 @@ void lcd_panel_disable(void)
 #define V_END_WIDTH    (7 + 3) /* lower_margin + vsync_len */
 #define SIG_POL                (DI_D3_DRDY_SHARP_POL | DI_D3_CLK_POL)
 #define IF_CONF                0
-#define IF_CLK_DIV     0x175
+#define IF_CLK_DIV     0x55
 #else
 
 

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Steal five dollars and you were a petty  thief.  Steal  thousands  of
dollars and you are either a government or a hero.
                                   - Terry Pratchett, _Going_Postal_
#1 lore raw
Quoted 8 lines · Wolfgang Denk

From: Stefano Babic <[email protected]>

Fix clock divider for COM57H5M10XRC display.
The previous setting caused flicker.

Tested on Qong (EVBLite with COM57H5M10XRC).

It seems I forget to submit this patch....thanks for doing !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================
#2 lore raw
In reply to Wolfgang Denk

Dear Stefano & Anatolij,

Quoted 8 lines · In message <[email protected]> I wrote:

From: Stefano Babic <[email protected]>

Fix clock divider for COM57H5M10XRC display.
The previous setting caused flicker.

Tested on Qong (EVBLite with COM57H5M10XRC).

If both of you ACK I could pull this directly.

Best regards,

Wolfgang Denk

Signature · 5 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
"Just think of a computer as hardware you can program."
- Nigel de la Tierre
#3 lore raw

Hello Wolfgang,

Quoted 5 lines · On Thu, 16 Dec 2010 14:31:20 +0100 Wolfgang Denk <[email protected]> wrote:

Dear Stefano & Anatolij,

Quoted 2 lines · In message <[email protected]> I wrote:

From: Stefano Babic <[email protected]>

Quoted 8 lines
Quoted 6 lines

Fix clock divider for COM57H5M10XRC display.
The previous setting caused flicker.

Tested on Qong (EVBLite with COM57H5M10XRC).

If both of you ACK I could pull this directly.

Thanks,
Anatolij

Acked-by
#4 lore raw
In reply to Wolfgang Denk
Quoted 10 lines · Wolfgang Denk

From: Stefano Babic <[email protected]>

Fix clock divider for COM57H5M10XRC display.
The previous setting caused flicker.

Tested on Qong (EVBLite with COM57H5M10XRC).

---

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80  Email: office at denx.de
=====================================================================
author Applied
#5 lore raw
In reply to Wolfgang Denk

drivers/video/mx3fb.c

Quoted 13 lines · In message <[email protected]> you wrote:

From: Stefano Babic <[email protected]>

Fix clock divider for COM57H5M10XRC display.
The previous setting caused flicker.

Tested on Qong (EVBLite with COM57H5M10XRC).

---

drivers/video/mx3fb.c +0 -0

Applied, thanks.

Best regards,

Wolfgang Denk

Signature · 6 lines
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
ATTENTION: Despite Any Other Listing of Product Contents Found  Here-
on, the Consumer is Advised That, in Actuality, This Product Consists
Of 99.9999999999% Empty Space.